参数资料
型号: M34571GD-XXXFP
元件分类: 微控制器/微处理器
英文描述: 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO24
封装: 5.30 X 10.10 MM, 0.80 MM PITCH, PLASTIC, SSOP-24
文件页数: 7/33页
文件大小: 1526K
代理商: M34571GD-XXXFP
Rev.1.02
May 25, 2007
Page 13 of 124
REJ03B0179-0102
4571 Group
(5) Stack registers (SKS) and stack pointer (SP)
Stack registers (SKs) are used to temporarily store the contents of
program counter (PC) just before branching until returning to the
original routine when;
branching to an interrupt service routine (referred to as an
interrupt service routine),
performing a subroutine call, or
executing the table reference instruction (TABP p).
Stack registers (SKs) are eight identical registers, so that
subroutines can be nested up to 8 levels. However, one of stack
registers is used respectively when using an interrupt service
routine and when executing a table reference instruction.
Accordingly, be careful not to over the stack when performing
these operations together. The contents of registers SKs are
destroyed when 8 levels are exceeded.
The register SK nesting level is pointed automatically by 3-bit
stack pointer (SP). The contents of the stack pointer (SP) can be
transferred to register A with the TASP instruction.
Figure 11 shows the stack registers (SKs) structure.
Figure 12 shows the example of operation at subroutine call.
(6) Interrupt stack register (SDP)
Interrupt stack register (SDP) is a 1-stage register. When an
interrupt occurs, this register (SDP) is used to temporarily store
the contents of data pointer, carry flag, skip flag, register A, and
register B just before an interrupt until returning to the original
routine.
Unlike the stack registers (SKs), this register (SDP) is not used
when executing the subroutine call instruction and the table
reference instruction.
(7) Skip flag
Skip flag controls skip decision for the conditional skip
instructions and continuous described skip instructions. When an
interrupt occurs, the contents of skip flag is stored automatically
in the interrupt stack register (SDP) and the skip condition is
retained.
Fig 11. Stack registers (SKs) structure
Fig 12. Example of operation at subroutine call
Stack pointer (SP) points “7” at reset or returning
from RAM back-up mode. It points “0” by
executing the first BM instruction, and the
contents of program counter is stored in SK0.
When the BM instruction is executed after eight
stack registers are used ((SP) = 7), (SP) = 0 and
the contents of SK0 is destroyed.
Program counter (PC)
SK0
SK1
SK2
SK3
SK4
SK5
SK6
SK7
Executing BM
instruction
Executing RT
instruction
(SP) = 0
(SP) = 1
(SP) = 2
(SP) = 3
(SP) = 4
(SP) = 5
(SP) = 6
(SP) = 7
(SP)
0
(SK0)
000116
(PC)
SUB1
(PC)
(SK0)
(SP)
7
Main program
Address
000016 NOP
000116 BM SUB1
000216 NOP
SUB1:
NOP
RT
Subroutine
Note : Returning to the BM instruction execution
address with the RT instruction, and the BM
instruction becomes the NOP instruction.
相关PDF资料
PDF描述
M34571G6-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO24
M34571GDFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO24
M34571G4FP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO24
M34571G6FP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO24
M35015-XXXSP 24 X 10 CHARACTERS CRT CHAR DSPL CTLR, PDIP20
相关代理商/技术参数
参数描述
M3458 功能描述:电缆固定件和配件 RLTCG 3/8 NPT BLACK NO NUT RoHS:否 制造商:Heyco 类型:Cable Grips, Liquid Tight 材料:Nylon 颜色:Black 安装方法:Cable 最大光束直径:11.4 mm 抗拉强度:
M34583EDFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34583MD-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34584EDFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34584MD-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER