参数资料
型号: M37542F8VGP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PQFP32
封装: 7 X 7 MM, 0.80 MM PITCH, PLASTIC, LQFP-32
文件页数: 87/139页
文件大小: 1448K
代理商: M37542F8VGP
7542 Group
Rev.3.02
Oct 31, 2006
Page 51 of 134
REJ03B0006-0302
Fig. 60 Block diagram of clock synchronous serial I/O2
Fig. 61 Operation of clock synchronous serial I/O2 function
●Serial I/O2
Serial I/O2 can be used as either clock synchronous or asynchro-
nous (UART) serial I/O. A dedicated timer is also provided for
baud rate generation.
(1) Clock Synchronous Serial I/O2 Mode
Clock synchronous serial I/O2 mode can be selected by setting
the serial I/O2 mode selection bit of the serial I/O2 control register
(bit 6) to “1”.
For clock synchronous serial I/O2, the transmitter and the receiver
must use the same clock. If an internal clock is used, transfer is
started by a write signal to the TB/RB.
D7
D0
D1
D2
D3
D4
D5
D6
D0
D1
D2
D3
D4
D5
D6
RBF = 1
TSC = 1
TBE = 0
TBE = 1
TSC = 0
Transfer shift clock
(1/2 to 1/2048 of the internal
clock, or an external clock)
Serial output TxD2
Serial input RxD2
Write pulse to receive/transmit
buffer register 2 (address 002E16)
Overrun error (OE)
detection
Notes 1: As the transmit interrupt (TI), which can be selected, either when the transmit buffer has emptied (TBE=1) or after
the transmit shift operation has ended (TSC=1), by setting the transmit interrupt source selection bit (TIC) of the
serial I/O2 control register.
2: If data is written to the transmit buffer register when TSC=0, the transmit clock is generated continuously and serial
data is output continuously from the TxD2 pin.
3: The receive interrupt (RI) is set when the receive buffer full flag (RBF) becomes “1” .
Receive enable signal SRDY2
1/4
F/F
P06/SCLK2
Serial I/O2 status register
Serial I/O2 control register
P07/SRDY2
P04/RXD2
P05/TXD2
XIN
Receive buffer register 2
Address 002E16
Receive shift register 2
Receive buffer full flag (RBF)
Receive interrupt request (RI)
Clock control circuit
Shift clock
Serial I/O2 synchronous
clock selection bit
Frequency division ratio 1/(n+1)
Baud rate generator 2
Address 003216
BRG count source selection bit
Clock control circuit
Falling-edge detector
Transmit buffer register 2
Data bus
Address 002E16
Shift clock
Transmit shift completion flag (TSC)
Transmit buffer empty flag (TBE)
Transmit interrupt request (TI)
Transmit interrupt source selection bit
Address 002F16
Data bus
Address 003016
Transmit shift register 2
相关PDF资料
PDF描述
M30620FCPFP 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
MB90F342CSPF 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
MC9S12C32VFA25 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP48
MSC1200Y2PFBT 8-BIT, FLASH, 33 MHz, MICROCONTROLLER, PQFP48
MC68HC11E1VFN3R2 8-BIT, 3 MHz, MICROCONTROLLER, PQCC52
相关代理商/技术参数
参数描述
M37542M2-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37542M2-XXXGP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37542M2-XXXHP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37542M2-XXXSP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37542M4-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER