参数资料
型号: M37545G4-XXXGP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP32
封装: 7 X 7 MM, 0.80 MM PITCH, PLASTIC, LQFP-32
文件页数: 44/65页
文件大小: 782K
代理商: M37545G4-XXXGP
Rev.1.07
Mar 19, 2009
Page 47 of 60
REJ03B0140-0107
7545 Group
3. Oscillator concerns
So that the product obtains the stabilized operation clock on the
user system and its condition, contact the resonator manufacturer
and select the resonator and oscillation circuit constants.
Be careful especially when range of voltage and temperature is
wide.
Take care to prevent an oscillator that generates clocks for a
microcomputer operation from being affected by other signals.
(1) Keeping oscillator away from large current signal
lines
Install a microcomputer (and especially an oscillator) as far as
possible from signal lines where a current larger than the
tolerance of current value flows.
<Reason>
In the system using a microcomputer, there are signal lines for
controlling motors, LEDs, and thermal heads or others. When a
large current flows through those signal lines, strong noise
occurs because of mutual inductance.
(2) Installing oscillator away from signal lines where
potential levels change frequently
Install an oscillator and a connecting pattern of an oscillator
away from signal lines where potential levels change frequently.
Also, do not cross such signal lines over the clock lines or the
signal lines which are sensitive to noise.
<Reason>
Signal lines where potential levels change frequently (such as the
CARR pin signal line) may affect other lines at signal rising edge
or falling edge. If such lines cross over a clock line, clock
waveforms may be deformed, which causes a microcomputer
failure or a program runaway.
Fig. 54 Wiring for a large current signal line/Writing of
signal lines where potential levels change
frequently
(3) Oscillator protection using VSS pattern
As for a two-sided printed circuit board, print a VSS pattern on
the underside (soldering side) of the position (on the component
side) where an oscillator is mounted.
Connect the VSS pattern to the microcomputer VSS pin with the
shortest possible wiring. Besides, separate this VSS pattern from
other VSS patterns.
Fig. 55 VSS pattern on the underside of an oscillator
XIN
XOUT
VSS
M
Mutual inductance
Large
current
GND
XIN
XOUT
VSS
CARR
Do not cross
N.G.
1. Keeping oscillator away from large current signal lines
2. Installing oscillator away from signal lines where potential
levels change frequently
Microcomputer
XIN
XOUT
VSS
An example of VSS patterns on the
underside of a printed circuit board
Oscillator wiring
pattern example
Separate the VSS line for oscillation from other VSS lines
相关PDF资料
PDF描述
M37545G4KP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PDSO32
M37546G4SP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP32
M30201F6FP 16-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP56
M30201F6TFP 16-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP56
MB90543GSPMC 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
M37545G6GP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37545G6GP#U0 功能描述:MCU 3/5V 24K 32-LQFP QZ-ROM RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 标准包装:250 系列:80C 核心处理器:8051 芯体尺寸:8-位 速度:16MHz 连通性:EBI/EMI,I²C,UART/USART 外围设备:POR,PWM,WDT 输入/输出数:40 程序存储器容量:- 程序存储器类型:ROMless EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:68-LCC(J 形引线) 包装:带卷 (TR)
M37545G6KP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37545G6-XXXGP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37545G8GP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER