收藏本站
参数资料
型号： M38D29FFFP
元件分类： 微控制器/微处理器
英文描述： 8-BIT, FLASH, 6.25 MHz, MICROCONTROLLER, PQFP64
封装： 14 X 14 MM, 0.80 MM PITCH, PLASTIC, LQFP-64
文件页数： 44/136页
文件大小： 2856K
代理商： M38D29FFFP
Rev.3.02
Apr 10, 2008
Page 15 of 131
REJ03B0177-0302
38D2 Group
Fig. 8 Switch procedure of CPU mode register
After releasing reset
N
Y
Low-speed/XIN mode ?
Start the oscillation
(bits 4 and 5 of CPUM)
Oscillator starts oscillation.
Do not change bit 3, bit 6 and bit 7
of CPUM until oscillation stabilizes.
Select internal system clock
(bit 3 of CPUM or bit 7, 6 = “01”)
Wait by on-chip oscillator operation until
establishment of oscillator clock
Switch the main clock division ratio
selection bit (bit 7, 6 = “00” or “10”)
Start with an on-chip oscillator.
Initial value of CPUM is E016.
Initial value of CPUM2 is 0016.
As for the details of condition for
transition among each mode,
refer to the state transition of
system clock.
System can operate in on-chip
oscillator mode until oscillation
stabilize.
Select internal system clock.
Do not change bit 3, bit 6 and bit
7 of CPUM at the same time.
Select main clock division ratio.
Switch to frequency/2 or frequency/4 mode here,
if necessary.
Main routine
Reset
L
OSCSEL ?
After releasing reset
Wait by operation until establishment
H
The CPU starts its operation
in the built-in XIN mode.
Initial value of CPUM is 4016.
Initial value of CPUM2 is 0116.
After releasing reset
N
Y
Low-speed/XIN mode ?
Start the oscillation
(bits 4 and 5 of CPUM)
Oscillator starts oscillation.
Do not change bit 3, bit 6 and bit 7 of CPUM until
oscillation stabilizes.
Select internal system clock
(bit 3 of CPUM or bit 7, 6 = “01”)
Wait by on-chip oscillator operation until
establishment of oscillator clock
Switch the main clock division ratio
selection bit (bit 7, 6 = “00” or “10”)
Start with an on-chip oscillator.
Initial value of CPUM is E016.
Initial value of CPUM2 is 0016.
As for the details of condition for
transition among each mode,
refer to the state transition of system clock.
System can operate in on-chip oscillator mode until
oscillation stabilize.
Select internal system clock.
Do not change bit 3, bit 6 and bit 7 of CPUM at the
same time.
Select main clock division ratio.
Switch to frequency/2 or 4 mode here, if necessary.
Main routine
Reset
<QzROM version>
<Flash memory version>
相关PDF资料
PDF描述
MPC5534MVZ80 MICROCONTROLLER, PBGA324
MC908GR16AVFAER 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PQFP48
MC908GZ16CFAER 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PQFP48
MC908QY2AMDWER 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PDSO16
MC9S08AW16CFUER 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
相关代理商/技术参数
参数描述
M38D29FFHP#U1 制造商:Renesas Electronics Corporation 功能描述:
M38D29GFHP#U0 制造商:Renesas Electronics Corporation 功能描述:
M38D29T2-RLFS-HP 制造商:Renesas Electronics Corporation 功能描述:
M38D58G8FP#U0 功能描述:IC 740/38D5 MCU QZ-ROM 80QFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器， 系列:740/38000 标准包装:250 系列:80C 核心处理器:8051 芯体尺寸:8-位 速度:16MHz 连通性:EBI/EMI，I²C，UART/USART 外围设备:POR，PWM，WDT 输入/输出数:40 程序存储器容量:- 程序存储器类型:ROMless EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:68-LCC（J 形引线） 包装:带卷 (TR)
M38D58G8HP#U0 功能描述:IC 740/38D5 MCU QZ-ROM 80LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器， 系列:740/38000 标准包装:250 系列:80C 核心处理器:8051 芯体尺寸:8-位 速度:16MHz 连通性:EBI/EMI，I²C，UART/USART 外围设备:POR，PWM，WDT 输入/输出数:40 程序存储器容量:- 程序存储器类型:ROMless EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:68-LCC（J 形引线） 包装:带卷 (TR)
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*