- 您现在的位置：买卖IC网 > PDF目录20169 > MAX753ESE+T (Maxim Integrated)IC CNTRLR CONTRAST 16-SOIC PDF资料下载
参数资料
| 型号： | MAX753ESE+T |
| 厂商： | Maxim Integrated |
| 文件页数： | 7/16页 |
| 文件大小： | 0K |
| 描述： | IC CNTRLR CONTRAST 16-SOIC |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 显示器类型： | CCFL - 冷色阴极荧光灯 |
| 电流 - 电源： | 500µA |
| 电源电压： | 4 V ~ 30 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 16-SOIC |
| 包装： | 带卷 (TR) |
CCFL Backlight and
LCD Contrast Controllers
V TAP (t)
C10
V TAP, PK
V SEC (t)
I LAMP (t)
V LAMP (t)
T
t
V TAP , PK = ?
φ = tan ? 1 ?
? ω C 10 V LAMP , RMS ?
Figure 4. Simple Model of the CCFL
The minimum operating input voltage is determined by
the transformer turns ratio (n), the lamp operating volt-
age (V LAMP ), and the ballast capactor (C10). Using a
simple model of the CCFL (see Figure 4) we can calcu-
late what the T1 center-tap voltage will be at maximum
lamp current. The voltage on the CCFL is in phase with
the current through it. Let us define I LAMP (t) =
√ 2I LAMP,RMS cos( ω t) and V LAMP (t) = √ 2V LAMP,RMS
cos( ω t); then the peak voltage at the center tap will be
as follows:
2 I LAMP , RMS
n ω C 10 sin ( φ )
where,
? ? I LAMP , RMS ?
?
,
n is the secondary-to-primary turns ratio of T1, and ω is
the frequency of Royer oscillation in radians per sec-
ond. The voltage on the center tap of T1 is a full-wave
rectified sine wave (see Figure 5). The average voltage
at V TAP must equal the average voltage at the LX node
of the MAX758A, since there cannot be any DC voltage
on inductor L1; thus the minimum operating voltage
must be greater than the average voltage at V TAP .
LCD Bias Generators
The MAX753/MAX754’s LCD bias generators provide
adjustable output voltages for powering LCD displays.
The MAX753’s LCD converter generates a negative
output, while the MAX754’s generates a positive output.
The MAX753/MAX754 employ a constant-peak-current
Figure 5. Voltage at the Center Tap of T1
pulse-frequency-modulation (PFM) switching regulator.
The MAX753 adds a simple diode-capacitor voltage
inverter to the switching regulator.
Constant-Current PFM Control Scheme
The LCD bias generators in these devices use a con-
stant-peak-current PFM control scheme. Figure 6, which
shows the MAX754’s boost switching regulator, illus-
trates this control method. When Q3 closes (Q3 “on”) a
voltage equal to BATT is applied to the inductor, caus-
ing current to flow from the battery, through the inductor
and switch, and to ground. This current ramps up linear-
ly, storing energy in the inductor’s magnetic field. When
Q3 opens, the inductor voltage reverses, and current
flows from the battery, through the inductor and diode,
and into the output capacitor. The devices regulate the
output voltage by varying how frequently the switch is
opened and closed.
The MAX753/MAX754 not only regulate the output volt-
age, but also maintain a constant peak inductor cur-
rent, regardless of the battery voltage. The ICs vary the
switch on-time to produce the constant peak current,
and vary its off-time to ensure that the inductor current
reaches zero at the end of each cycle.
The internal circuitry senses both the output voltage
and the voltage at the LX node, and turns on the MOS-
FET only if: 1) The output voltage is out of regulation,
and 2) the voltage at LX is less than the battery voltage.
The first condition keeps the output in regulation, and
the second ensures that the inductor current always
resets to zero (i.e., the part always operates in discon-
tinuous-conduction mode).
_______________________________________________________________________________________
7
相关PDF资料 |
PDF描述 |
|---|---|
| PSA60R-240-R-CR1 | ADAPTER WALL R-SERIES 60W 24V |
| PSA60R-240-R-CNR3 | ADAPTER WALL R-SERIES 60W 24V |
| ACM31DRSN | CONN EDGECARD 62POS DIP .156 SLD |
| ABB11DHFD | CONN EDGECARD 22POS .050 SMD |
| FMM36DSEH | CONN EDGECARD 72POS .156 EYELET |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX-754-1205AP | 功能描述:线性和开关式电源 MAX750 SERIES MULTI OUTPT PWR SUPPLY 12V RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度: |
| MAX-754-1205G | 功能描述:PWR/PWR SUPPLY QUAD OUTPUT 750W RoHS:是 类别:电源 - 外部/内部（非板载） >> AC DC 转换器 系列:MAX-750 产品培训模块:MP Modular-Configurable AC-DC Power Supply 特色产品:Configurable Power Supplies 标准包装:1 系列:MP |
| MAX-754-1205P | 制造商:SLPOWER 制造商全称:SL Power Electronics 功能描述:MAX-750 Multiple Output |
| MAX-754-1252 | 制造商:SLPOWER 制造商全称:SL Power Electronics 功能描述:700, 750 WATTS MULTIPLE OUTPUT |
| MAX7545AKCWP | 制造商:Maxim Integrated Products 功能描述: |
发布紧急采购，3分钟左右您将得到回复。