参数资料
型号: MB95D108AWPFV
厂商: FUJITSU LTD
元件分类: 微控制器/微处理器
英文描述: 8-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP64
封装: 10 X 10 MM, 1.70 MM HEIGHT, 0.50 MM PITCH, PLASTIC, LQFP-64
文件页数: 34/67页
文件大小: 824K
代理商: MB95D108AWPFV
MB95100A Series
4
(Continued)
*1 : Specify clock mode when ordering MASK ROM.
*2 : MB95F108AS/MB95D108AS is single clock and MB95F108AW/MB95D108AW is dual clock.
*3 : This device is under development.
*4 : For details of option, refer to “■ MASK OPTION”.
Note : Part number of the evaluation device in MB95100A series is MB95FV100B-101. When using it, the MCU
board (MB2146-301) is required.
Part number
Parameter
MB95107A
MB95F108AS/
MB95F108AW
MB95R107A*3
MB95D108AS/
MB95D108AW
Peripheral
functions
8/10-bit A/D
converter
(12 channels)
8-bit or 10-bit resolution can be selected.
16-bit reload timer
Two clock modes and two counter operating modes can be selected. Square waveform
output
Count clock : 7 internal clocks and external clock can be selected.
Counter operating mode : reload mode or one-shot mode can be selected.
8/16-bit compound
timer (2 channels)
Each channel of the timer can be used as “8-bit timer
× 2 channels” or “16-bit timer × 1
channel”.
Built-in timer function, PWC function, PWM function, capture function and square wave-
form output
Count clock : 7 internal clocks and external clock can be selected.
16-bit PPG
(2 channels)
PWM mode or one-shot mode can be selected.
Counter operating clock : Eight selectable clock sources
Support for external trigger start
8/16-bit PPG
(2 channels)
Each channel of the PPG can be used as 8-bit PPG
× 2 channelsor 16-bit PPG × 1
channel.
Counter operating clock : Eight selectable clock sources
Watch counter
(for dual clock
product)
Count clock : Four selectable clock sources (125 ms, 250 ms, 500 ms, or 1 s)
Counter value can be set from 0 to 63. (Capable of counting for 1 minute when selecting
clock source 1 second and setting counter value to 60)
Watch prescaler
(for dual clock
product)
4 selectable interval times (125 ms, 250 ms, 500 ms, or 1 s)
External interrupt
(12 channels)
Interrupt by edge detection (rising, falling, or both edges can be selected.)
Can be used to recover from standby modes.
Standby mode
Sleep, stop, watch (for dual clock product), and timebase timer
相关PDF资料
PDF描述
MB95F114MWPMC 8-BIT, FLASH, 16.25 MHz, MICROCONTROLLER, PQFP52
MB95F116NSPMC 8-BIT, FLASH, 16.25 MHz, MICROCONTROLLER, PQFP52
MB95F118MWPMC 8-BIT, FLASH, 16.25 MHz, MICROCONTROLLER, PQFP52
MB95F114NSPMC 8-BIT, FLASH, 16.25 MHz, MICROCONTROLLER, PQFP52
MB95F116NWPMC 8-BIT, FLASH, 16.25 MHz, MICROCONTROLLER, PQFP52
相关代理商/技术参数
参数描述
MB95D108BS 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:8-bit Proprietary Microcontrollers
MB95D108BSPFM 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:8-bit Proprietary Microcontrollers
MB95D108BSPFV 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:8-bit Proprietary Microcontrollers
MB95D108BW 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:8-bit Proprietary Microcontrollers
MB95D108BWPFM 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:8-bit Proprietary Microcontrollers