参数资料
型号: MC68HC05C8AMFB
厂商: FREESCALE SEMICONDUCTOR INC
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQFP44
封装: QFP-44
文件页数: 28/116页
文件大小: 781K
代理商: MC68HC05C8AMFB
Functional Pin Description
MC68HC05C8A MC68HCL05C8A MC68HSC05C8A Data Sheet, Rev. 5.1
Freescale Semiconductor
19
1.4.1 VDD and VSS
Power is supplied to the microcontroller using these two pins. VDD is the positive supply and VSS is
ground.
1.4.2 IRQ
This pin has a mask selectable option that provides two different choices of interrupt triggering sensitivity.
The IRQ pin contains an internal Schmitt trigger as part of its input to improve noise immunity. Refer to
Chapter 4 Interrupts for more detail.
1.4.3 OSC1 and OSC2
These pins provide control input for an on-chip clock oscillator circuit. A crystal, a ceramic resonator, a
resistor/capacitor combination, or an external signal connects to these pins providing a system clock. The
internal bus rate is one-half the external oscillator frequency.
1.4.4 RESET
This active low pin is used to reset the MCU to a known startup state by pulling RESET low. The RESET
pin contains an internal Schmitt trigger as part of its input to improve noise immunity.
1.4.5 TCAP
This pin controls the input capture feature for the on-chip programmable timer. The TCAP pin contains an
internal Schmitt trigger as part of its input to improve noise immunity.
1.4.6 TCMP
The TCMP pin provides an output for the output compare feature of the on-chip timer subsystem.
1.4.7 Port A (PA0–PA7)
These eight input/output (I/O) lines comprise port A. The state of any pin is software programmable and
all port A lines are configured as input during power-on or reset. For detailed information on I/O
1.4.8 Port B (PB0–PB7)
These eight I/O lines comprise port B. The state of any pin is software programmable, and all port B lines
are configured as input during power-on or reset. Port B has mask option enabled pullup devices and
interrupt capability by pin. The interrupts and pullups are enabled together. For a detailed description on
I/O programming, refer to 7.6 Input/Output Programming.
1.4.9 Port C (PC0–PC7)
These eight I/O lines comprise port C. The state of any pin is software programmable and all port C lines
are configured as input during power-on or reset. PC7 has high current sink and source capability. For a
detailed description on I/O programming, refer to 7.6 Input/Output Programming.
相关PDF资料
PDF描述
MPC8250ACVRMIBX 32-BIT, 266 MHz, RISC PROCESSOR, PBGA516
MPC860TZQ50D4R2 32-BIT, 50 MHz, RISC PROCESSOR, PBGA357
MC908GZ48VFU 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PQFP64
MC9S12GC32PCFA25 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP48
MC9S12KG128CPU 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
MC68HC05C9 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:TECHNICAL DATA
MC68HC05C9A 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Microcontrollers
MC68HC05C9AB 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Microcontrollers
MC68HC05C9AFB 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Microcontrollers
MC68HC05C9AFN 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Microcontrollers