
Pin Functions
MC68HC908GR8 MC68HC908GR4 Data Sheet, Rev. 7
Freescale Semiconductor
25
1.5.6 External Filter Capacitor Pin (CGMXFC)
1.5.7 Analog Power Supply/Reference Pins (VDDAD/VREFH and VSSAD/VREFL)
VDDAD and VSSAD are the power supply pins for the analog-to-digital converter. Decoupling of these pins
should be as per the digital supply.
NOTE
VREFH is the high reference supply for the ADC. The VREFH signal is
internally connected with VDDAD and have the same potential as VDDAD.
VDDAD should be tied to the same potential as VDD via separate traces.
VREFL is the low reference supply for the ADC. The VREFL pin is internally
connected with VSSAD and has the same potential as VSSAD. VSSAD should
be tied to the same potential as VSS via separate traces.
1.5.8 Port A Input/Output (I/O) Pins (PTA3/KBD3–PTA0/KBD0)
PTA3–PTA0 are special-function, bidirectional I/O port pins. Any or all of the port A pins can be
These port pins also have selectable pullups when configured for input mode. The pullups are disengaged
when configured for output mode. The pullups are selectable on an individual port bit basis.
When the port pins are configured for special-function mode (KBI), pullups will be automatically engaged.
As long as the port pins are in special-function mode, the pullups will always be on.
1.5.9 Port B I/O Pins (PTB5/AD5–PTB0/AD0)
PTB5–PTB0 are special-function, bidirectional I/O port pins that can also be used for analog-to-digital
There are no pullups associated with this port.
1.5.10 Port C I/O Pins (PTC1–PTC0)
PTC0 and PTC1 are only available on 32-pin QFP packages.
These port pins also have selectable pullups when configured for input mode. The pullups are disengaged
when configured for output mode. The pullups are selectable on an individual port bit basis.
1.5.11 Port D I/O Pins (PTD6/T2CH0–PTD0/SS)
PTD6–PTD0 are special-function, bidirectional I/O port pins. PTD3–PTD0 can be programmed to be
serial peripheral interface (SPI) pins, while PTD6–PTD4 can be individually programmed to be timer