参数资料
型号: MCP14E9T-E/MF
厂商: Microchip Technology
文件页数: 1/30页
文件大小: 0K
描述: IC MOSFET DRIVER 3A 8DFN-S
标准包装: 3,300
配置: 低端
输入类型: 反相
延迟时间: 45ns
电流 - 峰: 3A
配置数: 2
输出数: 2
电源电压: 4.5 V ~ 18 V
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 8-VDFN 裸露焊盘
供应商设备封装: 8-DFN-S(6x5)
包装: 带卷 (TR)
MCP14E9/10/11
3.0A Dual High-Speed Power MOSFET Driver With Enable
Features
? High Peak Output Current: 3.0A (typical)
? Independent Enable Function for Each Driver
Output
? Wide Input Supply Voltage Operating Range:
- 4.5V to 18V
? Low Shoot-Through/Cross-Conduction Current in
Output Stage
? High Capacitive Load Drive Capability:
- t R : 14 ns with 1800 pF load (typical)
- t F : 17 ns with 1800 pF load (typical)
? Short Delay Times:
- t D1 : 45 ns (typical)
- t D2 : 45 ns (typical)
? Low Supply Current:
- With Logic ‘ 1 ’ Input/Enable – 1 mA (typical)
- With Logic ‘ 0 ’ Input/Enable – 300 μA (typical)
? Latch-up Protected: Passed JEDEC JESD78A
? Logic Input will Withstand Negative Swing,
up to 5V
? Space-Saving Packages:
- 8-Lead SOIC, PDIP, 6x5 DFN
Applications
? Switch Mode Power Supplies
? Pulse Transformer Drive
? Line Drivers
General Description
The MCP14E9/10/11 devices are high-speed MOSFET
drivers, capable of providing 3.0A of peak current. The
dual inverting, dual non-inverting and complementary
outputs are directly controlled from either TTL or
CMOS (3V to 18V). These devices also feature low
shoot-through current, near matched rise/fall times and
propagation delays, which make them ideal for high
switching frequency applications.
The MCP14E9/10/11 devices operate from a 4.5V to
18V single power supply and can easily charge and
discharge 1800 pF of MOSFET gate capacitance. They
provide low enough impedances, in both the ON and
OFF states, to ensure the MOSFETs’ intended state
will not be affected, even by large transients.
The additional control of the MCP14E9/10/11 outputs is
allowed by the use of separate enable functions. The
ENB_A and ENB_B pins are active-high and are
internally pulled up to V DD . The pins may be left floating
for standard operation.
The MCP14E9/10/11 dual output 3.0A driver family is
offered in both surface-mount and pin-through-hole
packages with a -40 o C to +125 o C temperature rating.
The low thermal resistance of the thermally enhanced
DFN package allows greater power dissipation
capability for driving heavier capacitive or resistive
loads.
These devices are highly latch-up resistant under any
conditions within their power and voltage ratings. They
are not subject to damage when up to 5V of noise
?
Motor and Solenoid Drive
spiking (of either polarity) occurs on the ground pin.
The devices are fully latch-up protected when tested
according to JEDEC JESD78A. All terminals are fully
protected against Electrostatic Discharge (ESD), up to
4 kV (HBM) or 400V (MM).
? 2011 Microchip Technology Inc.
DS25005A-page 1
相关PDF资料
PDF描述
MCP1640RD-4ABC BOARD REF DES AAAA BAT BOOST
MCP3906AT-E/SS IC ENERGY METERING 24SSOP
MCP3907T-I/SS IC ENERGY METER W/OSC 24SSOP
MCZ33198EF IC TMOS DRIVER AUTO HISIDE 8SOIC
MCZ33285EFR2 IC TMOS DRIVER DUAL HISIDE 8SOIC
相关代理商/技术参数
参数描述
MCP-14-I9-LL 制造商:YAMAICHI 制造商全称:Yamaichi Electronics Co., Ltd. 功能描述:MatchCon
MCP-14-TI9-LL 制造商:YAMAICHI 制造商全称:Yamaichi Electronics Co., Ltd. 功能描述:MatchCon
MCP1525 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:2.5V and 4.096V Voltage References
MCP1525_05 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:2.5V and 4.096V Voltage References
MCP1525_13 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:2.5V and 4.096V Voltage References