参数资料
型号: MPC5566MZP132
厂商: Freescale Semiconductor
文件页数: 59/66页
文件大小: 0K
描述: MCU 3MB FLASH 132MHZ 416-PBGA
标准包装: 200
系列: MPC55xx Qorivva
核心处理器: e200z6
芯体尺寸: 32-位
速度: 132MHz
连通性: CAN,EBI/EMI,以太网,SCI,SPI
外围设备: DMA,POR,PWM,WDT
输入/输出数: 256
程序存储器容量: 3MB(3M x 8)
程序存储器类型: 闪存
RAM 容量: 128K x 8
电压 - 电源 (Vcc/Vdd): 1.35 V ~ 1.65 V
数据转换器: A/D 40x12b
振荡器型: 外部
工作温度: -40°C ~ 125°C
封装/外壳: 416-BBGA
包装: 托盘
MPC5566 Microcontroller Data Sheet, Rev. 3
Revision History for the MPC5566 Data Sheet
Freescale Semiconductor
62
Table 9, DC Electrical Specifications (continued)
Spec 27e, Operating current 1.5 V supplies @ 147 MHz:
Added maximum values for 8-way cache: all with footnote 11.
-- 1.65 typical = 650,
-- 1.35 typical = 530,
-- 1.65 high = 820,
-- 1.35 high = 650.
Added 4-way cache: all with footnote 11.
-- 1.65 high = 720
-- 1.35 high = 585
Spec 28: Changed 132 MHz to fMAX MHz.
Spec 29: Deleted @ 132 MHz.
Corrected footnote 3 to read: If standby operation is not required, connect the VSTBY to ground.
Combined old footnotes 11 and 12 for new footnote 6 and added to specs 27a, b, and c on the 8-way cache line
that reads: Eight-way cache enabled (L1CSR0[CORG] = 0b0).
Deleted footnotes 12 and 13 about preliminary specifications and specification pending characterization.
Figure 2, Added figure to show interpolated IDDSTBY values listed in Table 9.
Table 12, FMPLL Electrical Characteristics:
Added (TA = TL – TH) to the end of the second line in the table title.
Spec 1, footnote 1 in column 2: ‘PLL reference frequency range’: Changed to read ‘Nominal crystal and external
reference values are worst-case not more than 1%. The device operates correctly if the frequency remains within
± 5% of the specification limit. This tolerance range allows for a slight frequency drift of the crystals over time.
The designer must thoroughly understand the drift margin of the source clock.‘
Specs 12 and 13: Grouped (2 x Cl).
Spec 21, column 2: Changed fref_crystal to fref in ICO frequency equation, and
added the same equation but substituted fref_ext for fref for the external reference clock, giving:
fico = [ fref_crystal (MFD + 4) ] (PREDIV + 1)
fico = [ fref_ext (MFD + 4) ] (PREDIV + 1)
Spec 21, column 4, Max: Deleted old footnote 18 that reads:
The ICO frequency can be higher than the maximum allowable system frequency. For this case, set the CMPLL
synthesizer control register reduced frequency divider (FMPLL_SYNCR[RFD]) to divide-by-two (RFD = 0b001).
Therefore, for a 40 MHz maximum device (system frequency), program the FMPLL to generate 80 MHz at the
ICO output and then divide-by-two the RFD to provide the 40 MHz system clock.’
Spec 21: Changed column 5 from ‘fSYS’ MHz’ to: ‘fMAX’.
Spec 22: Changed column 4, Max Value from fMAX to 20, and added footnote 17 to read, ‘Maximum value for
dual controller (1:1) mode is (fMAX 2) and the predivider set to 1 (FMPLL_SYNCR[PREDIV] = 0b001).’
Table 13, eQADC Conversion Specifications:
Added (TA = TL – TH) to the table title.
Table 14, Flash Program and Erase Specifications:
Added (TA = TL – TH) to the table title.
Specs 7, 8, 9, and 10 Inserted new values for the H7Fa Flash pre-program and erase times and used the previous
values for Typical values.
-- 48 KB: from 340 to 345
-- 64 KB: from 400 to 415
Spec 8, 128KB block pre-program and erase time, Max column value from 15,000 to 7,500.
Moved footnote 1 from the table title to directly after the ‘Typical’ in the column 5 header.
Footnote 2: Changed from: ‘Initial factory condition:
100program/erase cycles, 25 oC, typical supply voltage,
80 MHz minimum system frequency.‘ To: ‘Initial factory condition:
100program/erase cycles, 25 oC, using a
typical supply voltage measured at a minimum system frequency of 80 MHz.’
Table 35. Table and Figure Changes Between Rev. 0.0 and Rev. 1.0 (continued)
Location
Description of Changes
相关PDF资料
PDF描述
JBXER1G03FCSDSR CONN RCPT 3POS FRONT MNT CRIMP
VE-22W-IX-F4 CONVERTER MOD DC/DC 5.5V 75W
VE-22W-IX-F3 CONVERTER MOD DC/DC 5.5V 75W
MC14LC5480DW IC CODEC-FILTER PCM 5V 20-SOIC W
MC145483SD IC CODEC-FILTER PCM 3V 20-SSOP
相关代理商/技术参数
参数描述
MPC5566MZP132R 制造商:Freescale Semiconductor 功能描述:32-BIT MPC55XX POWERPC RISC 3MB FLASH 1.8V/2.5V/3.3V/5V 416 - Tape and Reel
MPC5566MZP144 功能描述:32位微控制器 - MCU 3M FLASH32K CACHE 128K RoHS:否 制造商:Texas Instruments 核心:C28x 处理器系列:TMS320F28x 数据总线宽度:32 bit 最大时钟频率:90 MHz 程序存储器大小:64 KB 数据 RAM 大小:26 KB 片上 ADC:Yes 工作电源电压:2.97 V to 3.63 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:LQFP-80 安装风格:SMD/SMT
MPC5567 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Microcontroller
MPC5567EVB 功能描述:BOARD EVALUATION MPC5567MZP132 RoHS:否 类别:编程器,开发系统 >> 过时/停产零件编号 系列:- 标准包装:1 系列:- 传感器类型:CMOS 成像,彩色(RGB) 传感范围:WVGA 接口:I²C 灵敏度:60 fps 电源电压:5.7 V ~ 6.3 V 嵌入式:否 已供物品:成像器板 已用 IC / 零件:KAC-00401 相关产品:4H2099-ND - SENSOR IMAGE WVGA COLOR 48-PQFP4H2094-ND - SENSOR IMAGE WVGA MONO 48-PQFP
MPC5567EVBE 功能描述:BOARD EVALUATION MPC5567 RoHS:是 类别:编程器,开发系统 >> 通用嵌入式开发板和套件(MCU、DSP、FPGA、CPLD等) 系列:- 产品培训模块:Blackfin® Processor Core Architecture Overview Blackfin® Device Drivers Blackfin® Optimizations for Performance and Power Consumption Blackfin® System Services 特色产品:Blackfin? BF50x Series Processors 标准包装:1 系列:Blackfin® 类型:DSP 适用于相关产品:ADSP-BF548 所含物品:板,软件,4x4 键盘,光学拨轮,QVGA 触摸屏 LCD 和 40G 硬盘 配用:ADZS-BFBLUET-EZEXT-ND - EZ-EXTENDER DAUGHTERBOARDADZS-BFLLCD-EZEXT-ND - BOARD EXT LANDSCAP LCD INTERFACE 相关产品:ADSP-BF542BBCZ-4A-ND - IC DSP 16BIT 400MHZ 400CSBGAADSP-BF544MBBCZ-5M-ND - IC DSP 16BIT 533MHZ MDDR 400CBGAADSP-BF542MBBCZ-5M-ND - IC DSP 16BIT 533MHZ MDDR 400CBGAADSP-BF542KBCZ-6A-ND - IC DSP 16BIT 600MHZ 400CSBGAADSP-BF547MBBCZ-5M-ND - IC DSP 16BIT 533MHZ MDDR 400CBGAADSP-BF548BBCZ-5A-ND - IC DSP 16BIT 533MHZ 400CSBGAADSP-BF547BBCZ-5A-ND - IC DSP 16BIT 533MHZ 400CSBGAADSP-BF544BBCZ-5A-ND - IC DSP 16BIT 533MHZ 400CSBGAADSP-BF542BBCZ-5A-ND - IC DSP 16BIT 533MHZ 400CSBGA