参数资料
型号: MTD20N03HDL1
厂商: ON SEMICONDUCTOR
元件分类: JFETs
英文描述: 20 A, 30 V, 0.04 ohm, N-CHANNEL, Si, POWER, MOSFET
封装: CASE 369D-01, DPAK-3
文件页数: 6/9页
文件大小: 95K
代理商: MTD20N03HDL1
MTD20N03HDL
http://onsemi.com
6
I S
,SOURCE
CURRENT
t, TIME
Figure 11. Reverse Recovery Time (trr)
di/dt = 300 A/
ms
Standard Cell Density
High Cell Density
tb
trr
ta
trr
SAFE OPERATING AREA
The Forward Biased Safe Operating Area curves define
the maximum simultaneous draintosource voltage and
drain current that a transistor can handle safely when it is
forward biased. Curves are based upon maximum peak
junction temperature and a case temperature (TC) of 25
°C.
Peak repetitive pulsed power limits are determined by using
the thermal response data in conjunction with the procedures
discussed in AN569, “Transient Thermal Resistance
General Data and Its Use.”
Switching between the offstate and the onstate may
traverse any load line provided neither rated peak current
(IDM) nor rated voltage (VDSS) is exceeded, and that the
transition time (tr, tf) does not exceed 10
ms. In addition the
total power averaged over a complete switching cycle must
not exceed (TJ(MAX) TC)/(RqJC).
A power MOSFET designated EFET can be safely used
in switching circuits with unclamped inductive loads. For
reliable operation, the stored energy from circuit inductance
dissipated in the transistor while in avalanche must be less
than the rated limit and must be adjusted for operating
conditions differing from those specified. Although industry
practice is to rate in terms of energy, avalanche energy
capability is not a constant. The energy rating decreases
nonlinearly with an increase of peak current in avalanche
and peak junction temperature.
Although many EFETs can withstand the stress of
draintosource avalanche at currents up to rated pulsed
current (IDM), the energy rating is specified at rated
continuous current (ID), in accordance with industry
custom. The energy rating must be derated for temperature
as shown in the accompanying graph (Figure 13). Maximum
energy at currents below rated continuous ID can safely be
assumed to equal the values indicated.
VDS, DRAINTOSOURCE VOLTAGE (VOLTS)
I D
,DRAIN
CURRENT
(AMPS)
Figure 12. Maximum Rated Forward Biased
Safe Operating Area
0.1
1.0
100
1
10
100
ms
1 ms
dc
10 ms
VGS = 20 V
SINGLE PULSE
TC = 25°C
RDS(on) LIMIT
THERMAL LIMIT
PACKAGE LIMIT
E
AS
,SINGLE
PULSE
DRAINT
OSOURCE
A
V
ALANCHE
ENERGY
(mJ)
TJ, STARTING JUNCTION TEMPERATURE (°C)
0
25
50
75
100
125
120
200
40
80
150
160
Figure 13. Maximum Avalanche Energy versus
Starting Junction Temperature
ID = 20 A
相关PDF资料
PDF描述
MTD20N03HDLT4G 20 A, 30 V, 0.04 ohm, N-CHANNEL, Si, POWER, MOSFET
MTD20N06HDL1 20 A, 60 V, 0.07 ohm, N-CHANNEL, Si, POWER, MOSFET
MTD20N06VT4 20 A, 60 V, 0.085 ohm, N-CHANNEL, Si, POWER, MOSFET
MTD20N06VT4 20 A, 60 V, 0.08 ohm, N-CHANNEL, Si, POWER, MOSFET
MTD20P03HDL1G 19 A, 30 V, 0.099 ohm, P-CHANNEL, Si, POWER, MOSFET
相关代理商/技术参数
参数描述
MTD20N03HDLT4 制造商:ON Semiconductor 功能描述:Trans MOSFET N-CH 30V 20A 3-Pin(2+Tab) DPAK T/R
MTD20N03HL 制造商:Motorola Inc 功能描述:20N03HL
MTD20N06 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:TMOS POWER FET 20 AMPERES 60 VOLTS RDS(on) = 0.080 OHM
MTD20N06HD 制造商:ON Semiconductor 功能描述:Trans MOSFET N-CH 60V 20A 3-Pin(2+Tab) DPAK Rail 制造商:ON Semiconductor 功能描述:MOSFET N D-PAK
MTD20N06HD-1 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:Power MOSFET 20 Amps, 60 Volts N−Channel DPAK