NCP1083
http://onsemi.com
7
Recommended Operating Conditions
Operating conditions define the limits for functional operation and parametric characteristics of the device. Note that the
functionality of the device outside the operating conditions described in this section is not warranted. Operating outside the
recommended operating conditions for extended periods of time may affect device reliability.
All values concerning the DCDC controller, VDDH, VDDL, and nCLASS_AT blocks are with respect to ARTN. All others
are with respect to VPORTN
1,2
(unless otherwise noted).
Table 3. OPERATING CONDITIONS
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
INPUT SUPPLY
VPORT
Input supply voltage
VPORT = VPORTP
VPORTN
1,2.
0
57
V
SIGNATURE DETECTION
Vsignature
Input supply voltage signature detection
range
1.4
9.5
V
Rsignature
Signature resistance (Note 4)
23.75
26.25
kW
Offset_current
I_VportP + I_Rtn
VPORTP = RTN = 1.4 V
1.8
5
mA
Sleep_current
I_VportP + I_Rtn
VPORTP = RTN = 9.5 V
15
25
mA
CLASSIFICATION
Vcl
Input supply voltage classification range
13
20.5
V
V_mark
Mark event voltage range
(VPORTP falling)
5.4
9.7
V
I_mark
Current consumption I_VportP +
I_Rdet in Mark Event range
5.4 V d VPORT d 9.5 V
0.5
2.0
mA
dR_mark
Input signature during Mark Event
(Note 7)
For information only
12
kW
Vreset
Classification Reset range
(VPORTP falling)
4.3
4.9
5.4
V
Iclass0
Class 0: Rclass 10 kW (Note 6)
Iclass0 = I_VportP + I_Rdet
0
4
mA
Iclass1
Class 1: Rclass 130 W (Note 6)
Iclass1 = I_VportP + I_Rdet
9
12
mA
Iclass2
Class 2: Rclass 69.8 W (Note 6)
Iclass2 = I_VportP + I_Rdet
17
20
mA
Iclass3
Class 3: Rclass 44.2 W (Note 6)
Iclass3 = I_VportP + I_Rdet
26
30
mA
Iclass4
Class 4: Rclass 30.9 W (Note 6)
Iclass4 = I_VportP + I_Rdet
36
44
mA
Iclass5
Class 5: Rclass 22.1 W (Notes 5 and 6)
(for proprietary high power applications)
Iclass5 = I_VportP + I_Rdet
50
60
mA
IDC
class
Internal current consumption during
classification (Note 8)
For information only
600
mA
CLASSIFICATION INDICATOR
nCLASS_AT_i
nCLASS_AT current source
13
20
27
mA
NCLASS_AT_pd
R
DS,ON
of NCLASS_AT pull down
transistor
For information only
130
W
4.  Test done according to the IEEE 802.3af 2 Point Measurement. The minimum probe voltages measured at the PoEPD are 1.4 V and 2.4 V,
and the maximum probe voltages are 8.5 V and 9.5 V.
5.  This extended classification range can be used with a PSE which also uses this classification range to deliver more current than specified
by IEEE 802.3.
6.  Measured with an external Rdet of 25.5 kW between VPORTP and VPORTN
1,2
, and for 13 V < VPORT < 20.5 V (with VPORT = VPORTP
VPORTN
1,2
). Resistors are assumed to have 1% accuracy.
7.  Measured with the 2 Point Measurement defined in the IEEE 802.3af standard with 5.4 V and 9.5 V the extreme values for V2 and V1.
8.  This typical current excludes the current in the Rclass and Rdet external resistors.