参数资料
型号: NE1617ADS,112
厂商: NXP Semiconductors
文件页数: 1/30页
文件大小: 305K
描述: IC TEMP MONITOR 16SSOP
标准包装: 100
功能: 温度监控系统(传感器)
传感器类型: 内部和外部
感应温度: -55°C ~ 125°C,外部传感器
精确度: ±3°C 本地(最大),±5°C 远程(最大)
拓扑: ADC,多路复用器,寄存器库
输出类型: SMBus?
输出警报:
输出风扇:
电源电压: 3 V ~ 5.5 V
工作温度: -55°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 16-SSOP(0.154",3.90mm 宽)
供应商设备封装: 16-SSOP
包装: 管件
其它名称: 935268119112
NE1617ADS
NE1617ADS-ND
 
1.   General description
The NE1617A is an accurate two-channel temperature monitor. It measures the
temperature of itself and the temperature of a remote sensor. The remote sensor is a
diode connected transistor. This can be in the form of either a discrete NPN/PNP, such as
the 2N3904/2N3906, or a diode connected PNP built into another die, such as is done on
some Intel microprocessors.
The temperature of both the remote and local sensors is stored in a register that can be
read via a 2-wire SMBus. The temperatures are updated at a rate that is programmable
via the SMBus (the average supply current is dependent upon the update rate  the
faster the rate, the higher the current).
In addition to the normal operation, which is to update the temperature at the programmed
rate, there is a one-shot mode that will force a temperature update.
There is also an alarm that senses either an overtemperature or undertemperature
condition. The trip points for this alarm are also programmable.
The device can have one of nine addresses (determined by two address pins), so there
can be up to nine of the NE1617A on the SMBus.
It can also be put in standby mode (in order to save power). This can be done either with
software (over the SMBus) or with hardware (using the STBY
 pin).
2.   Features and benefits
n  Replacement for Maxim MAX1617 and Analog Devices ADM1021
n  Monitors local and remote temperature
n  Local (on-chip) sensor accuracy:
u ?/SPAN>2 ?/SPAN>C at 60 ?/SPAN>C to 100 ?/SPAN>C
u ?/SPAN>3 ?/SPAN>C at -40 ?/SPAN>C to 125 ?/SPAN>C
n  Remote sensor accuracy:
u ?/SPAN>3 ?/SPAN>C at 60 ?/SPAN>C to 100 ?/SPAN>C
u ?/SPAN>5 ?/SPAN>C at -40 ?/SPAN>C to 125 ?/SPAN>C
n  No calibration required
n  Programmable overtemperature/undertemperature alarm
n  SMBus 2-wire serial interface up to 100 kHz
n  3 V to 5.5 V supply range; 5.5 V tolerant
n  70 mA supply current in operating mode
n  3 mA (typical) supply current in standby mode
NE1617A
Temperature monitor for microprocessor systems
Rev. 5  20 March 2012
Product data sheet
相关PDF资料
PDF描述
NE1619DS,118 IC TEMP MONITOR 16SSOP
NIS5112D1R2G IC ELECTRONIC FUSE HOTSWAP 8SOIC
NIS5132MN2TXG IC ELECTRONIC FUSE 12V 10DFN
NIS5132MN3TXG IC ELECTRONIC FUSE 12V 10-DFN
NSI45015WT1G IC LED DRIVER LINEAR SOD-123
相关代理商/技术参数
参数描述
NE1617DS 功能描述:板上安装温度传感器 I2C LOC +/- 2OC AND REM +/- 3OC TS RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor
NE1617DS,112 功能描述:板上安装温度传感器 I2C LOC +/- 2OC AND RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor
NE1617DS,118 功能描述:板上安装温度传感器 I2C LOC +/- 2OC AND REM +/- 3OC TS RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor
NE1618 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Temperature monitor for microprocessor systems
NE1618DS 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Temperature monitor for microprocessor systems