NTE3115, NTE3116, NTE3117
Bar Graph Display
Description:
The NTE3115 (High–Efficiency Red), NTE3116 (High Efficiency Green), and NTE3117 (Yellow) are
10–segment bar graph displays with separate anodes and cathodes for each light segment. The
packages are end stackable.
Features:
Large Segments, Closely Spaced
End Stackable
Fast Switching, Excellent for Multiplexing
Low Power Consumption
Directly Compatible with IC’s
Wide Viewing Angle
Standard .300” DIP Lead Spacing
Categorized for Luminous Intensity (Note 1)
Absolute Maximum Ratings:
Power Dissipation (T
A
= +25
°
C)
Derate Linearly from 50
°
C
Operating Temperature Range
Storage Temperature Range
Continuous Forward Current
Total
NTE3115, NTE3116
NTE3117
Per Segment
NTE3115, NTE3116
NTE3117
Reverse Voltage, Per Segment
Lead Temperature (During Soldering, 5sec max, Note 2)
750mW
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
–14.3mW/
°
C
–40
°
to +85
°
C
–40
°
to +85
°
C
300mA
200mA
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30mA
25mA
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6V
+260
°
C
Typical Thermal Characteristics:
Thermal Resistance, Junction–to–Free–Air, R
thJA
Wavelength Temperature Coefficient (Case Temperature)
Forward Voltage Temperature Coefficient
NTE3115
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NTE3116
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NTE3117
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
160
°
C/W
1.0/
°
C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
–2.0mV/
°
C
1.4mV/
°
C
–1.5mV/
°
C
Note 1. The average Luminous Intensity is obtained by summing the Luminous Intensity of each seg-
ment and dividing by the total number of segments. The standard of measurement is the
Photo Research Corp. “Spectra” Microcandela Meter (Model IV–D) corrected for wave-
length. Intensity will not vary more than
±
33.3% between all segments within a unit.
Note 2. Leads immersed to 1/16” (1.6mm) from the body of the device. Maximum unit surface tem-
perature is +140
°
C. For flux removal, Freon TF, Freon TE, isoproponal or water may be used
up to their boiling points.