参数资料
| 型号： | OM4068H/2,518 |
| 厂商： | NXP Semiconductors |
| 文件页数： | 25/28页 |
| 文件大小： | 0K |
| 描述： | IC LCD DRIVER 44-QFP |
| 产品培训模块： | LCD Driver |
| 标准包装： | 1 |
| 显示器类型： | LCD |
| 配置： | 32 段 |
| 接口： | 串行 |
| 电流 - 电源： | 12µA |
| 电源电压： | 2.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 44-QFP |
| 供应商设备封装： | 44-PQFP（10x10） |
| 包装： | 标准包装 |
| 产品目录页面： | 844 (CN2011-ZH PDF) |
| 其它名称： | 568-4513-6 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页当前第25页第26页第27页第28页
Philips Semiconductors
LCD driver for low multiplex rates
During placement and before soldering, the package must
be fixed with a droplet of adhesive. The adhesive can be
applied by screen printing, pin transfer or syringe
dispensing. The package can be soldered after the
adhesive is cured.
Maximum permissible solder temperature is 260 ° C, and
maximum duration of package immersion in solder is
10 seconds, if cooled to less than 150 ° C within
6 seconds. Typical dwell time is 4 seconds at 250 ° C.
A mildly-activated flux will eliminate the need for removal
of corrosive residues in most applications.
DEFINITIONS
Data sheet status
Product speci?cation
OM4068
R EPAIRING SOLDERED JOINTS
Fix the component by first soldering two diagonally-
opposite end leads. Use only a low voltage soldering iron
(less than 24 V) applied to the flat part of the lead. Contact
time must be limited to 10 seconds at up to 300 ° C. When
using a dedicated tool, all other leads can be soldered in
one operation within 2 to 5 seconds between
270 and 320 ° C.
Objective speci?cation
Preliminary speci?cation
Product speci?cation
This data sheet contains target or goal speci?cations for product development.
This data sheet contains preliminary data; supplementary data may be published later.
This data sheet contains ?nal product speci?cations.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the speci?cation
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the speci?cation.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
1998 Jun 18
25
相关PDF资料 |
PDF描述 |
|---|---|
| OPI1264 | ISOLATOR OPTICALLY COUPLED 10KV |
| OPI126 | OPTOISOLATOR PHOTOLOGIC 15KV |
| OPI150TXV | OPTOISOLATOR TRANSISTOR-OUT 50KV |
| OPI155 | ISOLATOR HS OPTICALLY COUPLED |
| OPI7340 | OPTOISOLATOR DARLINGTON-OUT 6KV |
相关代理商/技术参数 |
参数描述 |
|---|---|
| OM4068P | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:LCD driver for low multiplex rates |
| OM4068U | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:LCD driver for low multiplex rates |
| OM4068U/5 | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:LCD driver for low multiplex rates |
| OM4085 | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Universal LCD driver for low multiplex rates |
| OM4085T | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Universal LCD driver for low multiplex rates |
发布紧急采购，3分钟左右您将得到回复。