参数资料
| 型号： | PCF8576T,118 |
| 厂商： | NXP Semiconductors |
| 文件页数： | 16/44页 |
| 文件大小： | 0K |
| 描述： | IC LCD DVR UNVRSL LOW-MUX 56VSO |
| 标准包装： | 500 |
| 显示器类型： | LCD |
| 配置： | 8 段，15 段，160 元件 |
| 接口： | I²C，2 线串口 |
| 数字或字符： | 10 字符，20 字符，160 元件 |
| 电流 - 电源： | 180µA |
| 电源电压： | 2 V ~ 9 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 56-BSOP（0.435"，11.50mm 宽） |
| 供应商设备封装： | 56-VSOP |
| 包装： | 带卷 (TR) |
| 其它名称： | 933740730118 PCF8576TD-T PCF8576TD-T-ND |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页当前第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页
Philips Semiconductors
Universal LCD driver for low multiplex rates
Product speci?cation
PCF8576
6.12
Data pointer
6.14
Output bank selector
The addressing mechanism for the display RAM is
realized using the data pointer. This allows the loading of
an individual display data byte, or a series of display data
bytes, into any location of the display RAM. The sequence
commences with the initialization of the data pointer by the
LOAD DATA POINTER command. Following this, an
arriving data byte is stored starting at the display RAM
address indicated by the data pointer thereby observing
the filling order shown in Fig.11. The data pointer is
automatically incremented in accordance with the chosen
LCD configuration. That is, after each byte is stored, the
contents of the data pointer are incremented by eight
(static drive mode), by four (1 : 2 multiplex drive mode) or
by two (1 : 4 multiplex drive mode).
This selects one of the four bits per display RAM address
for transfer to the display latch. The actual bit chosen
depends on the particular LCD drive mode in operation
and on the instant in the multiplex sequence. In 1 : 4
multiplex, all RAM addresses of bit 0 are the first to be
selected, these are followed by the contents of bit 1, bit 2
and then bit 3. Similarly in 1 : 3 multiplex, bits 0, 1 and 2
are selected sequentially. In 1 : 2 multiplex, bits 0 and 1
are selected and, in the static mode, bit 0 is selected.
The PCF8576 includes a RAM bank switching feature in
the static and 1 : 2 multiplex drive modes. In the static
drive mode, the BANK SELECT command may request
the contents of bit 2 to be selected for display instead of
bit 0 contents. In the 1 : 2 drive mode, the contents of
6.13
Subaddress counter
bits 2 and 3 may be selected instead of bits 0 and 1. This
gives the provision for preparing display information in an
The storage of display data is conditioned by the contents
of the subaddress counter. Storage is allowed to take
place only when the contents of the subaddress counter
alternative bank and to be able to switch to it once it is
assembled.
agree with the hardware subaddress applied to A0, A1
6.15
Input bank selector
and A2. The subaddress counter value is defined by the
DEVICE SELECT command. If the contents of the
subaddress counter and the hardware subaddress do not
agree then data storage is inhibited but the data pointer is
incremented as if data storage had taken place. The
subaddress counter is also incremented when the data
pointer overflows.
The storage arrangements described lead to extremely
efficient data loading in cascaded applications. When a
series of display bytes are sent to the display RAM,
automatic wrap-over to the next PCF8576 occurs when
the last RAM address is exceeded. Subaddressing across
device boundaries is successful even if the change to the
next device in the cascade occurs within a transmitted
character (such as during the 14th display data byte
transmitted in 1 : 3 multiplex mode).
2001 Oct 02
16
The input bank selector loads display data into the display
RAM in accordance with the selected LCD drive
configuration. Display data can be loaded in bit 2 in static
drive mode or in bits 2 and 3 in 1 : 2 drive mode by using
the BANK SELECT command. The input bank selector
functions independent of the output bank selector.
相关PDF资料 |
PDF描述 |
|---|---|
| PCF8578H/1,118 | IC LCD DRVR ROW/CLMN 64-LQFP |
| PCF8579H/1:118 | IC LCD COLUMN DRIVER 64-LQFP |
| PCN13-50S-2.54DSA | DIN CONN RCPT 50POS 2 ROW STR |
| PI2121-00-LGIZ | IC OR CTRLR N-CH 17LGA |
| PI5PD2065UEEX | IC POWER DIST USB 2.3A 8MSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PCF8576TD | 功能描述:LCD 驱动器 LCD DVR UNVRSL LOW-MUX RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| PCF8576TD-T | 功能描述:LCD 驱动器 160 SEGMENT LCD SEGMENT DRIVER RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| PCF8576U | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Universal LCD driver for low multiplex rates |
| PCF8576U/10 | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Universal LCD driver for low multiplex rates |
| PCF8576U/12 | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Universal LCD driver for low multiplex rates |
发布紧急采购，3分钟左右您将得到回复。