参数资料
型号: PH28F256L18T85
厂商: INTEL CORP
元件分类: PROM
英文描述: StrataFlash Wireless Memory
中文描述: 16M X 16 FLASH 1.8V PROM, 85 ns, PBGA79
封装: 0.75 MM PITCH, LEAD FREE, VFBGA-79
文件页数: 65/106页
文件大小: 1272K
代理商: PH28F256L18T85
Intel StrataFlash Wireless Memory (L18)
Datasheet
Intel StrataFlash Wireless Memory (L18)
Order Number: 251902, Revision: 009
April 2005
65
When a block erase operation is executing, issuing the Erase Suspend command requests the WSM
to suspend the erase algorithm at predetermined points. The partition that is suspended continues to
output Status Register data after the Erase Suspend command is issued. Block erase is suspended
when Status Register bits SR[7,6] are set. Suspend latency is specified in
Section 7.7, “Program
and Erase Characteristics” on page 41
.
To read data from blocks within the suspended partition (other than an erase-suspended block), the
Read Array command must be issued to that partition first. During Erase Suspend, a Program
command can be issued to any block other than the erase-suspended block. Block erase cannot
resume until program operations initiated during erase suspend complete. Read Array, Read Status
Register, Read Device Identifier, CFI Query, and Erase Resume are valid commands during Erase
Suspend. Additionally, Clear Status Register, Program, Program Suspend, Block Lock, Block
Unlock, and Block Lock-Down are valid commands during Erase Suspend.
To read data from a block in a partition that is not erasing, the erase operation does not need to be
suspended. If the other partition is already in Read Array, Read Device Identifier, or CFI Query,
issuing a valid address returns corresponding data. If the other partition is not in a read state, one of
the read commands must be issued to the partition before data can be read.
During an erase suspend, deasserting CE# places the device in standby, reducing active current.
V
PP
must remain at a valid level, and WP# must remain unchanged while in erase suspend. If
RST# is asserted, the device is reset.
12.3
Erase Resume
The Erase Resume command instructs the device to continue erasing, and automatically clears
status register bits SR[7,6]. This command can be written to any partition. When read at the
partition that’s erasing, the device outputs data corresponding to the partition’s last state. If status
register error bits are set, the Status Register should be cleared before issuing the next instruction.
RST# must remain deasserted (see
Figure 40, “Program Suspend/Resume Flowchart” on page 86
).
12.4
Erase Protection
When V
PP
= V
IL
, absolute hardware erase protection is provided for all device blocks. If V
PP
is
below V
PPLK
, erase operations halt and SR[3] is set indicating a V
PP
-level error.
相关PDF资料
PDF描述
PH28F640L18B85 StrataFlash Wireless Memory
PH28F640L18T85 StrataFlash Wireless Memory
PH2907A PNP switching transistor
PH2907 PNP switching transistor
PH2931-135S Rail-to-Rail, Very Low Noise Universal Dual Filter Building Block; Package: SO; No of Pins: 16; Temperature Range: -40°C to +85°C
相关代理商/技术参数
参数描述
PH28F320C3TD70A 制造商:Micron Technology Inc 功能描述:Flash Mem Parallel 3V/3.3V 32M-Bit 2M x 16 70ns 48-Pin VFBGA Tray 制造商:Micron Technology Inc 功能描述:MM#869664FLASH 28F320C3TD 70 VF-PBGA47 E
PH28F320W18BE60A 制造商:Micron Technology Inc 功能描述:IC FLASH 32MBIT 60NS VFBGA
PH28F320W18BE60B 制造商:Micron Technology Inc 功能描述:32MB, CRYSTAL .75 VFBGA 1.8 LF - Tape and Reel
PH28F320W18BE60D 制造商:Micron Technology Inc 功能描述:32MB, CRYSTAL .75 VFBGA 1.8 LF - Trays
PH28F320W18BE60E 制造商:Micron Technology Inc 功能描述:32MB, CRYSTAL .75 VFBGA 1.8 LF - Tape and Reel