参数资料
型号: R1EX25512ATA00A#S0
厂商: Renesas Electronics America
文件页数: 12/22页
文件大小: 0K
描述: IC EEPROM 512K 5MHZ 8TSSOP
标准包装: 1
格式 - 存储器: EEPROMs - 串行
存储器类型: EEPROM
存储容量: 512K (64K x 8)
速度: 3MHz,5MHz
接口: SPI 串行
电源电压: 1.8 V ~ 5.5 V
工作温度: -40°C ~ 85°C
封装/外壳: 8-TSSOP(0.173",4.40mm 宽)
供应商设备封装: 8-TSSOP
包装: 标准包装
其它名称: R1EX25512ATA00A#S0DKR
R1EX25512ASA00A/R1EX25512ATA00A
Read Status Register (RDSR):
The Read Status Register (RDSR) instruction allows the Status Register to be read. The Status Register may be read at
any time, even while a Write or Write Status Register cycle is in progress. When one of these cycles is in progress, it is
recommended to check the Write In Progress (WIP) bit before sending a new instruction to the device. It is also
possible to read the Status Register continuously, as shown in the following figure.
Read Status Register (RDSR) Sequence
S
W
V IH
V IL
V IH
V IL
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14
15
C
D
V IH
V IL
V IH
V IL
Status Register Out
Q
High-Z
7
6
5
4
3
2
1
0
7
The status and control bits of the Status Register are as follows:
WIP bit: The Write In Progress (WIP) bit indicates whether the memory is busy with a Write or Write Status Register
cycle. When set to 1, such a cycle is in progress. When reset to 0, no such cycles are in progress.
WEL bit: The Write Enable Latch (WEL) bit indicates the status of the internal Write Enable Latch. When set to 1, the
internal Write Enable Latch is set. When set to 0, the internal Write Enable Latch is reset and no Write or Write Status
Register instructions are accepted.
BP1, BP0 bits: The Block Protect (BP1, BP0) bits are non-volatile. They define the size of the area to be software
protected against Write instructions. These bits are written with the Write Status Register (WRSR) instruction. When
one or both of the Block Protect (BP1, BP0) bits are set to 1, the relevant memory area (as defined in the Write Protect
Block Size table) becomes protected against Write (WRITE) instructions. The Block Protect (BP1, BP0) bits can be
written provided that the Hardware Protected mode has not been set.
SRWD bit: The Status Register Write Disable (SRWD) bit is operated in conjunction with the write protect ( W ) signal.
The Status Register Write Disable (SRWD) bit and write protect ( W ) signal allows the device to be put in the Hardware
Protected mode (When the Status Register Write Disable (SRWD) bit is set to 1, and write protect ( W ) signal is driven
low). In this mode, the non-volatile bits of the Status Register (SRWD, BP1, BP0) become read-only bits and the Write
Status Register (WRSR) instruction is no longer accepted for execution.
R10DS0046EJ0200 Rev.2.00
Oct.04, 2010
Page 12 of 20
相关PDF资料
PDF描述
RA1P011FP1 CONN PLUG 11POS STRAIGHT GOLD
RACD03-700 LED DRIVER 3W 10-43V OUT SGL
RACD06-700 LED DRIVER 6W 3-8.5V OUT LED DR
RACD12-500 LED DRIVER 0.5AOUT 3-24VDC OUT
RACD20-350D LED DRIVER 230VAC 2X(3-34)V OUT
相关代理商/技术参数
参数描述
R1EX25512ATA00I 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Serial Peripheral Interface 512K EEPROM (64-Kword × 8-bit)
R1F55B32T2M4576 制造商:CTS Corporation 功能描述:SMT CRYSTAL 2.4576MHZ - Bulk
R1G120-AD11-02 功能描述:鼓风机 Size=120 mm CFM=147 VDC=48 RoHS:否 制造商:Murata 产品:Blowers 电流类型:DC 电源电压:5.3 V 气流:1 l/min 轴承类型: 噪声: 速度: 功率额定值: 框架尺寸 (mm):20 mm x 20 mm x 1.85 mm 外壳材料: 端接类型:SMD/SMT 系列:MZB
R1G120-AD13-02 功能描述:鼓风机 Size=120 mm CFM=147 VDC=24 RoHS:否 制造商:Murata 产品:Blowers 电流类型:DC 电源电压:5.3 V 气流:1 l/min 轴承类型: 噪声: 速度: 功率额定值: 框架尺寸 (mm):20 mm x 20 mm x 1.85 mm 外壳材料: 端接类型:SMD/SMT 系列:MZB
R1G120-AD13-02-ROHS 制造商:ebm-papst Inc 功能描述:DC Motorized Impeller Ball Bearing 24V 1.2A 26W 4060RPM 147.14CFM 62dB Flange Mount