- 您现在的位置：买卖IC网 > Datasheet目录353 > R1EX25512ATA00A#S0 (Renesas Electronics America)IC EEPROM 512K 5MHZ 8TSSOP Datasheet资料下载
参数资料
| 型号： | R1EX25512ATA00A#S0 |
| 厂商： | Renesas Electronics America |
| 文件页数： | 8/22页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 512K 5MHZ 8TSSOP |
| 标准包装： | 1 |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 512K (64K x 8) |
| 速度： | 3MHz，5MHz |
| 接口： | SPI 串行 |
| 电源电压： | 1.8 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 8-TSSOP |
| 包装： | 标准包装 |
| 其它名称： | R1EX25512ATA00A#S0DKR |
R1EX25512ASA00A/R1EX25512ATA00A
Pin Function
Serial data output (Q)
This output signal is used to transfer data serially out of the device. Data is shifted out on the falling edge of serial
clock (C).
Serial data input (D)
This input signal is used to transfer data serially into the device. It receives instructions, addresses, and the data to
be written. Values are latched on the rising edge of serial clock (C).
Serial clock (C)
This input signal provides the timing of the serial interface. Instructions, addresses, or data present at serial data
input (D) are latched on the rising edge of serial clock (C). Data on serial data output (Q) changes after the falling
edge of serial clock (C).
Chip select ( S )
When this input signal is high, the device is deselected and serial data output (Q) is at high impedance. Unless an
internal write cycle is in progress, the device will be in the standby mode. Driving chip select ( S ) low enables the
device, placing it in the active power mode. After power-up, a falling edge on chip select ( S ) is required prior to the
start of any instruction.
Hold ( HOLD )
The hold ( HOLD ) signal is used to pause any serial communications with the device without deselecting the device.
During the hold condition, the serial data output (Q) is high impedance, and serial data input (D) and serial clock (C)
are don’t care. To start the hold condition, the device must be selected, with chip select ( S ) driven low.
Write protect ( W )
The main purpose of this input signal is to freeze the size of the area of memory that is protected against write
instructions (as specified by the values in the BP1 and BP0 bits of the status register). This pin must be driven either
high or low, and must be stable during all write operations.
R10DS0046EJ0200 Rev.2.00
Oct.04, 2010
Page 8 of 20
相关PDF资料 |
PDF描述 |
|---|---|
| RA1P011FP1 | CONN PLUG 11POS STRAIGHT GOLD |
| RACD03-700 | LED DRIVER 3W 10-43V OUT SGL |
| RACD06-700 | LED DRIVER 6W 3-8.5V OUT LED DR |
| RACD12-500 | LED DRIVER 0.5AOUT 3-24VDC OUT |
| RACD20-350D | LED DRIVER 230VAC 2X(3-34)V OUT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| R1EX25512ATA00I | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Serial Peripheral Interface 512K EEPROM (64-Kword × 8-bit) |
| R1F55B32T2M4576 | 制造商:CTS Corporation 功能描述:SMT CRYSTAL 2.4576MHZ - Bulk |
| R1G120-AD11-02 | 功能描述:鼓风机 Size=120 mm CFM=147 VDC=48 RoHS:否 制造商:Murata 产品:Blowers 电流类型:DC 电源电压:5.3 V 气流:1 l/min 轴承类型: 噪声: 速度: 功率额定值: 框架尺寸 (mm):20 mm x 20 mm x 1.85 mm 外壳材料: 端接类型:SMD/SMT 系列:MZB |
| R1G120-AD13-02 | 功能描述:鼓风机 Size=120 mm CFM=147 VDC=24 RoHS:否 制造商:Murata 产品:Blowers 电流类型:DC 电源电压:5.3 V 气流:1 l/min 轴承类型: 噪声: 速度: 功率额定值: 框架尺寸 (mm):20 mm x 20 mm x 1.85 mm 外壳材料: 端接类型:SMD/SMT 系列:MZB |
| R1G120-AD13-02-ROHS | 制造商:ebm-papst Inc 功能描述:DC Motorized Impeller Ball Bearing 24V 1.2A 26W 4060RPM 147.14CFM 62dB Flange Mount |
发布紧急采购，3分钟左右您将得到回复。