- 您现在的位置：买卖IC网 > Datasheet目录353 > R1EX25512ATA00A#S0 (Renesas Electronics America)IC EEPROM 512K 5MHZ 8TSSOP Datasheet资料下载
参数资料
| 型号： | R1EX25512ATA00A#S0 |
| 厂商： | Renesas Electronics America |
| 文件页数： | 15/22页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 512K 5MHZ 8TSSOP |
| 标准包装： | 1 |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 512K (64K x 8) |
| 速度： | 3MHz，5MHz |
| 接口： | SPI 串行 |
| 电源电压： | 1.8 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 8-TSSOP |
| 包装： | 标准包装 |
| 其它名称： | R1EX25512ATA00A#S0DKR |
R1EX25512ASA00A/R1EX25512ATA00A
Write to Memory Array (WRITE):
As shown in the following figures, to send this instruction to the device, chip select ( S ) is first driven low. The bits of
the instruction byte, address byte, and at least one data byte are then shifted in, on serial data input (D).
The instruction is terminated by driving chip select ( S ) high at a byte boundary of the input data. In the case of the first
figure, this occurs after the eighth bit of the data byte has been latched in, indicating that the instruction is being used to
write a single byte. The self-timed Write cycle starts, and continues for a period t W (as specified in AC Characteristics).
At the end of the cycle, the Write In Progress (WIP) bit is reset to 0.
If, though, chip select ( S ) continues to be driven low, as shown in the second figure, the next byte of the input data is
shifted in, so that more than a single byte, starting from the given address towards the end of the same page, can be
written in a single internal Write cycle.
Each time a new data byte is shifted in, the least significant bits of the internal address counter are incremented. If the
number of data bytes sent to the device exceeds the page boundary, the internal address counter rolls over to the
beginning of the page, and the previous data there are overwritten with the incoming data. (The page size of these
device is 128 bytes).
The instruction is not accepted, and is not executed, under the following conditions:
?
?
?
?
If the Write Enable Latch (WEL) bit has not been set to 1 (by executing a Write Enable instruction just before)
If a Write cycle is already in progress
If the device is deselected
If the addressed page is in the region protected by the Block Protect (BP1 and BP0) bits.
Byte Write (WRITE) Sequence (1 Byte)
S
W
V IH
V IL
V IH
V IL
C
V IH
V IL
0
1
2
3
4
5
6
7
8
9
10
20 21 22 23 24 25 26 27 28 29 30 31
Instruction
16-Bit Address
Data Byte 1
D
V IH
V IL
15 14 13
3
2
1
0
7
6
5
4
3
2
1
0
Q
High-Z
Note: 1. The memory size is shown in the Address Range Bits table.
R10DS0046EJ0200 Rev.2.00
Oct.04, 2010
Page 15 of 20
相关PDF资料 |
PDF描述 |
|---|---|
| RA1P011FP1 | CONN PLUG 11POS STRAIGHT GOLD |
| RACD03-700 | LED DRIVER 3W 10-43V OUT SGL |
| RACD06-700 | LED DRIVER 6W 3-8.5V OUT LED DR |
| RACD12-500 | LED DRIVER 0.5AOUT 3-24VDC OUT |
| RACD20-350D | LED DRIVER 230VAC 2X(3-34)V OUT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| R1EX25512ATA00I | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Serial Peripheral Interface 512K EEPROM (64-Kword × 8-bit) |
| R1F55B32T2M4576 | 制造商:CTS Corporation 功能描述:SMT CRYSTAL 2.4576MHZ - Bulk |
| R1G120-AD11-02 | 功能描述:鼓风机 Size=120 mm CFM=147 VDC=48 RoHS:否 制造商:Murata 产品:Blowers 电流类型:DC 电源电压:5.3 V 气流:1 l/min 轴承类型: 噪声: 速度: 功率额定值: 框架尺寸 (mm):20 mm x 20 mm x 1.85 mm 外壳材料: 端接类型:SMD/SMT 系列:MZB |
| R1G120-AD13-02 | 功能描述:鼓风机 Size=120 mm CFM=147 VDC=24 RoHS:否 制造商:Murata 产品:Blowers 电流类型:DC 电源电压:5.3 V 气流:1 l/min 轴承类型: 噪声: 速度: 功率额定值: 框架尺寸 (mm):20 mm x 20 mm x 1.85 mm 外壳材料: 端接类型:SMD/SMT 系列:MZB |
| R1G120-AD13-02-ROHS | 制造商:ebm-papst Inc 功能描述:DC Motorized Impeller Ball Bearing 24V 1.2A 26W 4060RPM 147.14CFM 62dB Flange Mount |
发布紧急采购，3分钟左右您将得到回复。