- 您现在的位置：买卖IC网 > PDF目录69323 > RTC-62423B-0 (EPSON TOYOCOM CORP) REAL TIME CLOCK, PDSO24 PDF资料下载
参数资料
| 型号： | RTC-62423B-0 |
| 厂商： | EPSON TOYOCOM CORP |
| 元件分类： | 时钟/数据恢复及定时提取 |
| 英文描述： | REAL TIME CLOCK, PDSO24 |
| 封装： | SOP-24 |
| 文件页数： | 6/24页 |
| 文件大小： | 195K |
| 代理商： | RTC-62423B-0 |
RTC - 62421 / 62423
Page - 11
MQ152-05
2.
Interrupt mode (ITRPT/STND = 1)
MASK bit
IRQ FLAG bit
*STD.P pin
01
0
1
01
0
1
0
(
)
Nothiing is output because
the MASK bit is at 1
Output timing
Reset at the poing at which 0 is written
to the IRQ FLAG bit
No interrupts are generated while the MASK bit is at 1
writing 0 to the IRQ FLAG bit does not cause a reset
while the MASK bit is in the valid range
The output levels of the STD.P pin are low (down) and open circuit (up).
(2) ITRPT/STND bit (D1)
The ITRPT/STND bit specifies fixed-period pulse output mode or interrupt mode for the fixed-period operating mode. The mode
selected by each setting of this bit is as follows:
ITRPT/STND
Operating mode
0
Fixed-period pulse output mode
1
Interrupt mode
For details of the timing of fixed-period operation, see the section on the t0 and t1 bits below.
(3) t0 (D2) and t1 (D3) bits
These bits select the timing of fixed-period operation in fixed-period pulse output mode or interrupt mode. There is no special
counter within the RTC for fixed-period operation; the fixed-period operation is performed at the incrementation of the time
(period) specified by the t0 and t1 bits.
i.
Setting t0 and t1
Setting these bits specifies the generation timing for fixed-period pulse output or fixed-period interrupts.
t0
t1
Period (frequency)
Remarks
0
1/64 second (64 Hz)
0
1
1 second (1 Hz)
1
0
1 minute (1/60 Hz)
1
1 hour (1/3600 Hz)
In fixed-period pulse output mode, the STD.P pin output is low for
7.8125 ms
(note that half the 1/64-second period is 7.8125 ms)
ii.
STD.P pin output control
The timing of STD.P pin output is at the incrementation of the period specified by the t0 and t1 bits.
Example: STD.P pin output when 1 hour is set
(Conditions: t0 = 1, t1 = 1, MASK = 0)
Automatic reset after 7.8125 ms
Reset by writing 0 to IRQ FLAG bit
(ITRPT/STND=0)
(ITRPT/STND=1)
PM 1:00
PM 2:00
STD.P pin output
Fixed-period pulse output mode
Interrupt mode
iii.
Frequency of STD.P pin output in fixed-period pulse output mode
In fixed-period pulse output mode, the timing of output is determined by the frequency of the internal quartz crystal. This
means that the output can be used to measure any error in the frequency of the quartz crystal.
Note:
The 30-seconds correction could generate a carry. If such a carry occurs when the t0 and t1 bits are set to (0, 1) or
(1, 1), the STD.P pin output could end up low. If the ITRPT/STND bit is 0, this low-level STD.P pin output will be held
from the time that the part of the counter that is below one second is cleared by the 30-seconds correction until the
incrementation of the 1/64-second digit of the internal counter restarts. Note that this may be different from the
normal case in which the STD.P pin output is low for 7.8125 ms.
The time of the low-level output of the first STD.P pin output after a RESET or STOP operation, or after 1 has been
written to the IRQ FLAG bit, may not be 7.8125 ms.
If any one of the t0, t1, or ITRPT/STND bits is overwritten, the IRQ FLAG bit may become 1. Therefore, after writing
to any of these bits, it is necessary to first write 0 to the IRQ FLAG bit then wait until the IRQ FLAG bit changes back
to 1.
相关PDF资料 |
PDF描述 |
|---|---|
| RTC-72421A | 0 TIMER(S), REAL TIME CLOCK, PDIP18 |
| RTC-72421B | 0 TIMER(S), REAL TIME CLOCK, PDIP18 |
| RTC-72423A-0 | 0 TIMER(S), REAL TIME CLOCK, PDSO24 |
| RTC-72423B-0 | REAL TIME CLOCK, PDSO24 |
| RTC-72423A-0 | 0 TIMER(S), REAL TIME CLOCK, PDSO24 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| RTC63421 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:4-bit MULTIFUNCTIONAL REAL TIME CLOCK MODULE |
| RTC-63421 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:4-bit MULTIFUNCTIONAL REAL TIME CLOCK MODULE |
| RTC-63421A | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Real-Time Clock |
| RTC-63421B | 功能描述:IC RTC SER +-50PPM 18-DIP RoHS:否 类别:集成电路 (IC) >> 时钟/计时 - 实时时钟 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- 类型:时钟/日历 特点:警报器，闰年，SRAM 存储容量:- 时间格式:HH:MM:SS（12/24 小时） 数据格式:YY-MM-DD-dd 接口:SPI 电源电压:2 V ~ 5.5 V 电压 - 电源，电池:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WDFN 裸露焊盘 供应商设备封装:8-TDFN EP 包装:管件 |
| RTC-63421M | 制造商:未知厂家 制造商全称:未知厂家 功能描述:4-bit MULTIFUNCTIONAL REAL TIME CLOCK MODULE |
发布紧急采购，3分钟左右您将得到回复。