参数资料
型号: RTC-62423B-0
厂商: EPSON TOYOCOM CORP
元件分类: 时钟/数据恢复及定时提取
英文描述: REAL TIME CLOCK, PDSO24
封装: SOP-24
文件页数: 7/24页
文件大小: 195K
代理商: RTC-62423B-0
RTC - 62421 / 62423
Page - 12
MQ152-05
4. CF register (control register F)
(1) RESET bit (D0)
Writing 1 to the RESET bit clears the sub-second bits of the internal counter down to the 1/8192-seconds counter. The reset
continues for as long as the RESET bit is 1. End the reset by writing 0 to the RESET bit. If the level of the CS1 pin goes low,
the RESET bit is automatically cleared to 0.
When switching the timer mode from 24-hour clock to 12-hour clock, or vice versa, write 1 to the RESET bit then 0.
Because RESET bit function is invalid on STOP bit in case of "1", please don't use it together with STOP bit.
(2) STOP bit (D1)
Writing 1 to the STOP bit stops the clock of the internal counter from the 1/8192 second bit onward. Writing 0 to the STOP bit
restarts the clock.
This function can be used to create a cumulative timer.
(3) 24/12 bit (D2)
Set the 24/12 bit to select either 12-hour clock or 24-hour clock as the timer mode. In 12-hour clock mode, the PM/AM bit is used.
i
Switching between 12-hour clock and 24-hour clock
Writing 1 to the 24/12 bit, then setting the RESET bit first to 1 then to 0, selects 24-hour clock mode.
Writing 0 to the 24/12 bit selects 24-hour clock mode. In 24-hour clock mode, the PM/AM bit is inoperative and is always 0.
Writing 0 to the 24/12 bit selects 12-hour clock mode. In 12-hour clock mode, the PM/AM bit becomes valid. It is 0 for a.m.
times and 1 for p.m. times.
ii.
Overwriting the 24/12 bit
Overwriting the contents of the 24/12 bit could destroy the contents of the registers from the H1 register upward (from the 1-
hour digit upward). Therefore, before overwriting the 24/12 bit, it is necessary to save the contents of the hour (H1, H10), day
(D1, D10), month (MO1, MO10), year (Y1, Y10), and day-of-the-week (W) registers, then re-write the data back into the
registers to suit the new timer mode, after overwriting the 24/12 bit.
iii.
Handling of RESET bit
Simply writing to the 24/12 bit does not trigger the switch over between 24-hour and 12-hour clock modes, and it is also
necessary to set the RESET bit first to 1 then to 0. Therefore, if the system proceeds to another operation without changing
the RESET bit after a write to the 24/12 bit, operation will continue without changing the timer mode. If the RESET bit is
changed later for some reason, the timer mode will change at that point. This careless change in status is not advisable from
the software point of view, and it may be difficult to determine the cause of such an error if it occurs infrequently, so make
sure that the RESET bit is changed immediately after the 24/12 bit is written to. Alternatively, design software in such a
manner that it is aware of the 24/12 bit when the RESET bit is written to.
(4) TEST bit (D3)
The TEST bit is used by EPSON for test purposes. Operation cannot be guaranteed if 1 is written to this bit, so make sure that it is
set to 0 during power-on initialization.
相关PDF资料
PDF描述
RTC-72421A 0 TIMER(S), REAL TIME CLOCK, PDIP18
RTC-72421B 0 TIMER(S), REAL TIME CLOCK, PDIP18
RTC-72423A-0 0 TIMER(S), REAL TIME CLOCK, PDSO24
RTC-72423B-0 REAL TIME CLOCK, PDSO24
RTC-72423A-0 0 TIMER(S), REAL TIME CLOCK, PDSO24
相关代理商/技术参数
参数描述
RTC63421 制造商:未知厂家 制造商全称:未知厂家 功能描述:4-bit MULTIFUNCTIONAL REAL TIME CLOCK MODULE
RTC-63421 制造商:未知厂家 制造商全称:未知厂家 功能描述:4-bit MULTIFUNCTIONAL REAL TIME CLOCK MODULE
RTC-63421A 制造商:未知厂家 制造商全称:未知厂家 功能描述:Real-Time Clock
RTC-63421B 功能描述:IC RTC SER +-50PPM 18-DIP RoHS:否 类别:集成电路 (IC) >> 时钟/计时 - 实时时钟 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- 类型:时钟/日历 特点:警报器,闰年,SRAM 存储容量:- 时间格式:HH:MM:SS(12/24 小时) 数据格式:YY-MM-DD-dd 接口:SPI 电源电压:2 V ~ 5.5 V 电压 - 电源,电池:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WDFN 裸露焊盘 供应商设备封装:8-TDFN EP 包装:管件
RTC-63421M 制造商:未知厂家 制造商全称:未知厂家 功能描述:4-bit MULTIFUNCTIONAL REAL TIME CLOCK MODULE