参数资料
型号: SAB80C517A-N18-T3
厂商: INFINEON TECHNOLOGIES AG
元件分类: 微控制器/微处理器
英文描述: 8-BIT, 18 MHz, MICROCONTROLLER, PQCC84
封装: PLASTIC, LCC-84
文件页数: 117/137页
文件大小: 2089K
代理商: SAB80C517A-N18-T3
Device Specification
Semiconductor Group
7-18
Data Memory (’Code Space’)
The data memory space consists of an internal and an external memory space. The
SAB 80C517A contains another 2 Kbyte on On-Chip RAM above the 256-bytes internal RAM
of the base type SAB 80C517. This RAM is called XRAM in this document.
External Data Memory
Up to 64 Kbyte external data memory can be addressed by instructions that use 8-bit or 16-bit
indirect addressing. For 8-bit addressing MOVX instructions in combination with registers R0
and R1 can be used. A 16-bit external memory addressing is supported by eight 16-bit
datapointers. Registers XPAGE and SYSCON are controlling whether data fetches at
addresses F800H to FFFFH are done from internal XRAM or from external data memory.
Internal Data Memory
The internal data memory is divided into four physically distinct blocks:
– the lower 128 bytes of RAM including four banks containing eight registers each
– the upper 128 byte of RAM
– the 128 byte special function register area.
– a 2 K
× 8 area which is accessed like external RAM (MOVX-instructions), implemented on
chip at the address range from F800H to FFFFH. Special Function Register SYSCON
controls whether data is read or written to XRAM or external RAM.
A mapping of the internal data memory is also shown in figure 2. The overlapping address
spaces are accessed by different addressing modes (see User's Manual SAB 80C517). The
stack can be located anywhere in the internal data memory.
Architecture for the XRAM
The contents of the XRAM is not affected by a reset or HW Power Down. After power-up the
contents is undefined, while it remains unchanged during and after a reset or HW Power Down
if the power supply is not turned off.
The additional On-Chip RAM is logically located in the "external data memory" range at the
upper end of the 64 Kbyte address range (F800H-FFFFH). It is possible to enable and disable
(only by reset) the XRAM. If it is disabled the device shows the same behaviour as the parts
without XRAM, i.e. all MOVX accesses use the external bus to physically external data
memory.
相关PDF资料
PDF描述
SAB83C517A-N18-T4 8-BIT, 18 MHz, MICROCONTROLLER, PQCC84
SAB80C517A-S18-T3 8-BIT, 18 MHz, MICROCONTROLLER, PQFP100
SAB83C517A-5S18-T3 8-BIT, MROM, 18 MHz, MICROCONTROLLER, PQFP100
SAB83C517A-5S18-T4 8-BIT, MROM, 18 MHz, MICROCONTROLLER, PQFP100
SAB80C517A-S18-T3 8-BIT, 18 MHz, MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
SAB80C517-M 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:8-Bit CMOS Single-Chip Microcontroller
SAB80C517-M16 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:8-Bit CMOS Single-Chip Microcontroller
SAB80C517-M-T40/85 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:8-Bit CMOS Single-Chip Microcontroller
SAB80C517-N 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:8-Bit CMOS Single-Chip Microcontroller
SAB80C517-N16 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:8-Bit CMOS Single-Chip Microcontroller