参数资料
型号: SC16IS850LIPW
厂商: NXP Semiconductors N.V.
元件分类: 连接器件
英文描述: Single UART with I2C-bus-SPI interface, 128 bytes of transmit and receive FIFOs, IrDA SIR built-in support
封装: SC16IS850LIBS<SOT616-3 (HVQFN24)|<<http://www.nxp.com/packages/SOT616-3.html<1<Always Pb-free,;SC16IS850LIBS<SOT616-3 (HVQFN24)|<<http://www.nxp.com/packages/SOT616-3.htm
文件页数: 18/60页
文件大小: 755K
代理商: SC16IS850LIPW
SC16IS850L
All information provided in this document is subject to legal disclaimers.
NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 1 — 22 July 2011
18 of 60
NXP Semiconductors
SC16IS850L
Single UART with I
2
C-bus/SPI interface
7.11.3.2
Auto address detection
If Special Character Detect is enabled (EFR[5] is set and the Xoff2 register contains the
address byte) the receiver will try to detect an address byte that matches the programmed
character in the Xoff2 register. If the received byte is a data byte or an address byte that
does not match the programmed character in the Xoff2 register, the receiver will discard
these data. Upon receiving an address byte that matches the Xoff2 character, the receiver
will be automatically enabled if not already enabled, and the address character is pushed
into the RX FIFO along with the parity bit (in place of the parity error bit). The receiver also
generates a line status interrupt (IER[2] must be set to ‘1’ at this time). The receiver will
then receive the subsequent data from the ‘master’ station until being disabled by the
controller after having received a message from the ‘master’ station.
If another address byte is received and this address byte does not match the Xoff2
character, the receiver will be automatically disabled and the address byte is ignored. If
the address byte matches the Xoff2 character, the receiver will put this byte in the RX
FIFO along with the parity bit in the parity error bit (LSR bit 2).
8. Register descriptions
Table 6
details the assigned bit functions for the SC16IS850L internal registers. The
assigned bit functions are more fully defined in
Section 8.1
through
Section 8.23
.
相关PDF资料
PDF描述
SC18IM700IPW Master I?C-bus controller with UART interface
SC2092 Pressure Transducer, Series 19 mm, Uncompensated, Pressure Range: 0 psi to 30 psi, Absolute, flush mount, 10 Vdc excitation
SC2092-400-15 Circular Connector; MIL SPEC:MIL-DTL-38999 Series III; Body Material:Metal; Series:TVS06; Number of Contacts:55; Connector Shell Size:23; Connecting Termination:Crimp; Circular Shell Style:Straight Plug; Body Style:Straight
SC2092-600-15 Circular Connector; No. of Contacts:55; Series:TVS06; Body Material:Metal; Connecting Termination:Crimp; Connector Shell Size:23; Circular Contact Gender:Socket; Circular Shell Style:Straight Plug; Insert Arrangement:23-55
SC6433 BWTV CAMERA SYNC PULSE GENERATOR
相关代理商/技术参数
参数描述
SC16IS850LIPW,118 制造商:NXP Semiconductors 功能描述:Single UART with I2C-bus/SPI interface 制造商:NXP Semiconductors 功能描述:SC16IS850LIPW/TSSOP24/REEL13// - Tape and Reel 制造商:NXP Semiconductors 功能描述:IC INTERFACE UART
SC16IS850LIPW,128 制造商:NXP Semiconductors 功能描述:SC16IS850LIPW/TSSOP24/RAIL13T// - Tape and Reel 制造商:NXP Semiconductors 功能描述:Slave I2C-bus/SPI Interface, 128 bytes
SC16lS741 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Smart, simple solutions for the 12 most common design concerns
SC16M11D70 功能描述:标准环形接头 Trim Trio Socket 16 AWG Contact Sz 16 RoHS:否 制造商:TE Connectivity / AMP 系列:Multimate III+ 触点尺寸: 触点类型:Pin (Male) 触点材料: 触点电镀:Tin over Nickel 触点类型2: 电流额定值:13 A 电压额定值:
SC16M11D70REV 功能描述:标准环形接头 Trim Trio Socket 16 AWG Contact Sz 16 RoHS:否 制造商:TE Connectivity / AMP 系列:Multimate III+ 触点尺寸: 触点类型:Pin (Male) 触点材料: 触点电镀:Tin over Nickel 触点类型2: 电流额定值:13 A 电压额定值: