![](http://datasheet.mmic.net.cn/140000/SL38160ZI-XXXT_datasheet_5012226/SL38160ZI-XXXT_11.png)
Rev 1.1, January 5, 2009
Page 11 of 11
SL38160
Thermal Characteristics
Parameter
Symbol
Condition
Min
Typ
Max
Unit
Thermal Resistance
Junction to Ambient
θ JA
Still air
-
80
-
°C/W
θ JA
1m/s air flow
-
70
-
°C/W
θ JA
3m/s air flow
-
68
-
°C/W
Thermal Resistance
Junction to Case
θ JC
Independent of air flow
-
36
-
°C/W
Ordering Information
[1]
Ordering Number
[2]
Marking
Shipping Package
Package
Temperature
SL38160ZC-XXX
Tube
16-pin TSSOP
0 to 70°C
SL38160ZC-XXXT
Tape and Reel
16-pin TSSOP
0 to 70°C
SL38160ZI-XXX
Tube
16-pin TSSOP
-40 to 85°C
SL38160ZI-XXXT
Tape and Reel
16-pin TSSOP
-40 to 85°C
Notes:
1. All SLI products are RoHS compliant.
2. “XXX” is “Dash” number and will be assigned by SLI for final programmed samples and production
units based on customer programming requirements.
The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without
notice. Silicon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences
resulting from the use of information included herein. Additionally, Silicon Laboratories assumes no responsibility for the functioning
of undescribed features or parameters. Silicon Laboratories reserves the right to make changes without further notice. Silicon
Laboratories makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor
does Silicon Laboratories assume any liability arising out of the application or use of any product or circuit, and specifically disclaims
any and all liability, including without limitation consequential or incidental damages. Silicon Laboratories products are not designed,
intended, or authorized for use in applications intended to support or sustain life, or for any other application in which the failure of
the Silicon Laboratories product could create a situation where personal injury or death may occur. Should Buyer purchase or use
Silicon Laboratories products for any such unintended or unauthorized application, Buyer shall indemnify and hold Silicon
Laboratories harmless against all claims and damages.