- 您现在的位置：买卖IC网 > PDF目录98209 > TDF8599TD (NXP SEMICONDUCTORS) 70 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO36 PDF资料下载
参数资料
| 型号： | TDF8599TD |
| 厂商： | NXP SEMICONDUCTORS |
| 元件分类： | 音频／视频放大 |
| 英文描述： | 70 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO36 |
| 封装： | PLASTIC, SOT851-2, HSOP-36 |
| 文件页数： | 9/53页 |
| 文件大小： | 329K |
| 代理商： | TDF8599TD |
第1页第2页第3页第4页第5页第6页第7页第8页当前第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页
TDF8599_2
NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 02 — 30 July 2009
17 of 53
NXP Semiconductors
TDF8599
I2C-bus controlled dual channel class-D power amplier
In I2C-bus mode, DC offsets generate a voltage shift around the bias voltage. When the
voltage shift exceeds threshold values, the offset alarm bit DB1[D2] is set and if bit
IB1[D7] is not set, diagnostic information is also given. Any detected offset shuts down
both channels when bit IB2[D7] is not set. To restart the TDF8599 in I2C-bus mode, pin
EN must be toggled or DCP disabled by connecting pin DCP to pin AGND.
In non-I2C-bus mode, when an offset is detected, DCP always gives diagnostic
information on pin DIAG and shuts down both channels.
Connecting a capacitor between pins DCP and AGND enables DC offset protection.
Connecting pin DCP to pin AGND disables DCP in both I2C-bus and non-I2C-bus mode.
8.5.6 Supply voltages
UnderVoltage Protection (UVP) is activated when the supply voltage drops below the UVP
threshold (typically 7.5 V). UVP triggers the UVP circuit causing the system to rst mute
and then stop switching. When the supply voltage rises above the threshold level, the
system restarts.
OverVoltage Protection (OVP) is activated when the supply voltage exceeds the OVP
threshold (typically 27 V). The OVP (or load dump) circuit is activated and the power
stages are shutdown.
An overview of all protection circuits and the amplier states is given in Table 10.
8.5.7 Overview of protection circuits and amplier states
[1]
When fault is removed.
[2]
Amplier gain depends on the junction temperature and size of the heat sink.
[3]
TFP inuences restart timing depending on heat sink size.
[4]
Shorted load causes a restart of the channel every 50 ms.
[5]
Latched protection is reset by toggling pin EN or by disabling DCP in I2C-bus mode.
[6]
In I2C-bus mode deep supply voltage drops will cause a Power-On Reset (POR). The restart requires an
I2C-bus command.
Table 10.
Overview of TDF8599 protection circuits and amplier states
Protection circuit name
Amplier state
Complete
shutdown
Channel
shutdown
Restart[1]
TFP
N[2]
OTP
Y
N
OCP
N
Y
WP
N
Y
DCP
Y
N
N[5]
UVP
Y
N
OVP
Y
N
Y
相关PDF资料 |
PDF描述 |
|---|---|
| TDF8599TH | 70 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO36 |
| TDF8704T/4-T | 1-CH 8-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO24 |
| TDF8704T/5-T | 1-CH 8-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO24 |
| TDF8704T/2-T | 1-CH 8-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO24 |
| TDF8712T-T | PARALLEL, 8 BITS INPUT LOADING, 0.065 us SETTLING TIME, 8-BIT DAC, PDSO16 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TDF8599TD/N2,512 | 功能描述:音频放大器 IC AMP AUDIO PWR 85W D RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
| TDF8599TD/N2,518 | 功能描述:音频放大器 IC AMP AUDIO PWR 85W D RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
| TDF8599TH | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:I2C-bus controlled dual channel 43 W/2 W single channel 85 W/1 W class-D power amplifier with load diagnostics |
| TDF8599TH/N2,512 | 功能描述:音频放大器 IC AMP AUDIO PWR 85W D RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
| TDF8599TH/N2,518 | 功能描述:音频放大器 IC AMP AUDIO PWR 85W D RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。