- 您现在的位置：买卖IC网 > PDF目录382605 > TLC32047IFN (Texas Instruments, Inc.) Wide-Band Analog Interface Circuit PDF资料下载
参数资料
| 型号： | TLC32047IFN |
| 厂商： | Texas Instruments, Inc. |
| 英文描述： | Wide-Band Analog Interface Circuit |
| 中文描述： | 宽带模拟接口电路 |
| 文件页数： | 20/61页 |
| 文件大小： | 303K |
| 代理商： | TLC32047IFN |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页当前第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页
2–2
2.1
All the internal timing of the AIC is derived from the high-frequency clock signal that drives the master clock
input. The shift clock signal, which strobes the serial port data between the AIC and DSP, is derived by
dividing the master clock input signal frequency by four.
Internal Timing Configuration (see Figure 2–1)
The TX(A) counter and the TX(B) counter, which are driven by the master clock signal, determine the D/A
conversion timing. Similarly, the RX(A) counter and the RX(B) counter determine the A/D conversion timing.
In order for the low-pass switched-capacitor filter in the D/A path (see Functional Block Diagram) to meet
its transfer function specifications, the frequency of its clock input must be 432 kHz. If the clock frequency
is not 432 kHz, the filter transfer function frequencies are frequency-scaled by the ratios of the clock
frequency to 432 kHz:
Absolute Frequency (kHz)
Normalized Frequency
SCF fclock(kHz)
432
(1)
To obtain the specified filter response, the combination of master clock frequency and the TX(A) counter
and the RX(A) counter values must yield a 432-kHz switched-capacitor clock signal. This 432-kHz clock
signal can then be divided by the TX(B) counter to establish the D/A conversion timing.
The transfer function of the band-pass switched-capacitor filter in the A/D path (see Functional Block
Diagram) is a composite of its high-pass and low-pass transfer functions. When the shift clock frequency
(SCF) is 432 kHz, the high-frequency roll-off of the low-pass section meets the band-pass filter transfer
function specification. Otherwise, the high-frequency roll-off is frequency-scaled by the ratio of the
high-pass section’s SCF clock to 432 kHz (see Figure 5–5). The low-frequency roll-off of the high-pass
section meets the band-pass filter transfer function specification when the A/D conversion rate is 24 kHz.
If not, the low-frequency roll-off of the high-pass section is frequency-scaled by the ratio of the A/D
conversion rate to 24 kHz.
The TX(A) counter and the TX(B) counter are reloaded each D/A conversion period, while the RX(A) counter
and the RX(B) counter are reloaded every A/D conversion period. The TX(B) counter and the RX(B) counter
are loaded with the values in the TB and RB registers, respectively. Via software control, the TX(A) counter
can be loaded with the TA register, the TA register less the TA
′
register, or the TA register plus the TA
′
register.
By selecting the TA register less the TA
′
register option, the upcoming conversion timing occurs earlier by
an amount of time that equals TA
′
times the signal period of the master clock. If the TA register plus the TA
′
register
option is executed, the upcoming conversion timing occurs later by an amount of time that equals
TA
′
times the signal period of the master clock. Thus, the D/A conversion timing can be advanced or
retarded. An identical ability to alter the A/D conversion timing is provided. However, the RX(A) counter can
be programmed via software control with the RA register, the RA register less the RA
′
register, or the RA
register plus the RA
′
register.
The ability to advance or retard conversion timing is particularly useful for modem applications. This feature
allows controlled changes in the A/D and D/A conversion timing and can be used to enhance signal-to-noise
performance, to perform frequency-tracking functions, and to generate nonstandard modem frequencies.
If the transmit and receive sections are configured to be synchronous, then the low-pass and band-pass
switched-capacitor filter clocks are derived from the TX(A) counter. Also, both the D/A and A/D conversion
timings are derived from the TX(A) counter and the TX(B) counter. When the transmit and receive sections
are configured to be synchronous, the RX(A) counter, RX(B) counter, RA register, RA
′
register, and RB
registers are not used.
相关PDF资料 |
PDF描述 |
|---|---|
| TLC32047C | Wide-Band Analog Interface Circuit |
| TLC32047I | Wide-Band Analog Interface Circuit |
| TLC320A545C | SMA (F) TO BNC (M) ADAPTERS |
| TLC320A545C-I | SMA (F) TO MCX (F) ADAPTERS |
| TLC320A545I | SMA (F) TO MCX (M) ADAPTERS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TLC32047IN | 制造商:TI 制造商全称:Texas Instruments 功能描述:Wide-Band Analog Interface Circuit |
| TLC3204CN | 制造商:Texas Instruments 功能描述: |
| TLC32071 | 制造商:TI 制造商全称:Texas Instruments 功能描述:HIGH-SPEED 8-BIT A/D AND D/A CONVERTER WITH 8-CHANNEL MULTIPLEXER |
| TLC320A545C | 制造商:TI 制造商全称:Texas Instruments 功能描述:Single Channel Data/Fax Codec |
| TLC320A545C-I | 制造商:TI 制造商全称:Texas Instruments 功能描述:Single Channel Data/Fax Codec |
发布紧急采购，3分钟左右您将得到回复。