参数资料
型号: TPS54160DGQR
厂商: TEXAS INSTRUMENTS INC
元件分类: 稳压器
英文描述: 2.7 A SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PDSO10
封装: GREEN, PLASTIC, MSOP-10
文件页数: 15/50页
文件大小: 1375K
代理商: TPS54160DGQR
RT / CLK
TPS54160
Clock
Source
PLL
R
fset
10pF
4kW
50 W
EXT
SLVS795C – OCTOBER 2008 – REVISED OCTOBER 2010
www.ti.com
DETAILED DESCRIPTION (continued)
How to Interface to RT/CLK Pin
The RT/CLK pin can be used to synchronize the regulator to an external system clock. To implement the
synchronization feature connect a square wave to the RT/CLK pin through the circuit network shown in
Figure 43. The square wave amplitude must transition lower than 0.5V and higher than 2.2V on the RT/CLK pin
and have an on time greater than 40 ns and an off time greater than 40 ns. The synchronization frequency range
is 100 kHz to 2200 kHz. The rising edge of the PH is synchronized to the falling edge of RT/CLK pin signal. The
external synchronization circuit should be designed in such a way that the device has the default frequency set
resistor connected from the RT/CLK pin to ground should the synchronization signal turn off. It is recommended
to use a frequency set resistor connected as shown in Figure 43 through a 50
resistor to ground. The resistor
should set the switching frequency close to the external CLK frequency. It is recommended to ac couple the
synchronization signal through a 10 pF ceramic capacitor to RT/CLK pin and a 4k
series resistor. The series
resistor reduces PH jitter in heavy load applications when synchronizing to an external clock and in applications
which transition from synchronizing to RT mode. The first time the CLK is pulled above the CLK threshold the
device switches from the RT resistor frequency to PLL mode. The internal 0.5V voltage source is removed and
the CLK pin becomes high impedance as the PLL starts to lock onto the external signal. Since there is a PLL on
the regulator the switching frequency can be higher or lower than the frequency set with the external resistor.
The device transitions from the resistor mode to the PLL mode and then will increase or decrease the switching
frequency until the PLL locks onto the CLK frequency within 100 microseconds.
When the device transitions from the PLL to resistor mode the switching frequency will slow down from the CLK
frequency to 150 kHz, then reapply the 0.5V voltage and the resistor will then set the switching frequency. The
switching frequency is divided by 8, 4, 2, and 1 as the voltage ramps from 0 to 0.8 volts on VSENSE pin. The
device implements a digital frequency shift to enable synchronizing to an external clock during normal startup
and fault conditions. Figure 44, Figure 45 and Figure 46 show the device synchronized to an external system
clock in continuous conduction mode (ccm) discontinuous conduction (dcm) and pulse skip mode (psm).
Figure 43. Synchronizing to a System Clock
22
Copyright 2008–2010, Texas Instruments Incorporated
Product Folder Link(s): TPS54160
相关PDF资料
PDF描述
TPS5420MDREPG4 5.2 A SWITCHING REGULATOR, 600 kHz SWITCHING FREQ-MAX, PDSO8
TPS5420MDREP 5.2 A SWITCHING REGULATOR, 600 kHz SWITCHING FREQ-MAX, PDSO8
TPS54225PWP 4.5 A SWITCHING REGULATOR, 700 kHz SWITCHING FREQ-MAX, PDSO14
TPS54225PWPR 4.5 A SWITCHING REGULATOR, 700 kHz SWITCHING FREQ-MAX, PDSO14
TPS54225TPWPRQ1 SWITCHING REGULATOR, PDSO14
相关代理商/技术参数
参数描述
TPS54160DGQRG4 功能描述:直流/直流开关调节器 3.5-60V,1.5A Step Down SWIFT Converter RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5
TPS54160DRCR 制造商:TI 制造商全称:Texas Instruments 功能描述:1.5-A, 60-V, STEP-DOWN SWIFT DC/DC CONVERTER WITH ECO-MODE
TPS54160DRCT 制造商:TI 制造商全称:Texas Instruments 功能描述:1.5-A, 60-V, STEP-DOWN SWIFT DC/DC CONVERTER WITH ECO-MODE
TPS54160EVM-230 功能描述:电源管理IC开发工具 TPS54160 Eval Mod RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V
TPS54160EVM-535 功能描述:电源管理IC开发工具 Eval Mod for High Brightness LED Drvr RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V