参数资料
型号: UPD78F9212CS-CAB-A
厂商: Renesas Electronics America
文件页数: 71/175页
文件大小: 0K
描述: MCU 8BIT 4KB FLASH 16PIN
标准包装: 400
系列: 78K0S/Kx1+
核心处理器: 78K0S
芯体尺寸: 8-位
速度: 10MHz
外围设备: LVD,POR,PWM,WDT
输入/输出数: 13
程序存储器容量: 4KB(4K x 8)
程序存储器类型: 闪存
RAM 容量: 128 x 8
电压 - 电源 (Vcc/Vdd): 2 V ~ 5.5 V
数据转换器: A/D 4x10b
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 16-DIP(0.300",7.62mm)
包装: 托盘
CHAPTER 9 A/D CONVERTER (
μPD78F921x ONLY)
User’s Manual U16994EJ6V0UD
160
(5) Successive approximation register (SAR)
This register compares the sampled analog voltage and the voltage of the D/A converter, and converts the result,
starting from the most significant bit (MSB).
When the voltage value is converted into a digital value down to the least significant bit (LSB) (end of A/D
conversion), the contents of the SAR register are transferred to the A/D conversion result register (ADCR).
(6) 10-bit A/D conversion result register (ADCR)
The result of A/D conversion is loaded from the successive approximation register to this register each time A/D
conversion is completed, and the ADCR register holds the result of A/D conversion in its lower 10 bits (the higher
6 bits are fixed to 0).
(7) 8-bit A/D conversion result register (ADCRH)
The result of A/D conversion is loaded from the successive approximation register to this register each time A/D
conversion is completed, and the ADCRH register holds the result of A/D conversion in its higher 8 bits.
(8) Controller
When A/D conversion has been completed, INTAD is generated.
(9) VDD pin
This is the positive power supply pin.
In the 78K0S/KY1+, VDD functions alternately as the A/D converter reference voltage input. When using the A/D
converter, stabilize VDD at the supply voltage used (2.7 to 5.5 V).
(10) VSS pin
This is the ground potential pin.
In the 78K0S/KY1+, VSS functions alternately as the ground potential of the A/D converter. Be sure to connect
VSS to a stabilized GND (= 0 V).
(11) A/D converter mode register (ADM)
This register is used to set the conversion time of the analog input signal to be converted, and to start or stop the
conversion operation.
(12) Analog input channel specification register (ADS)
This register is used to specify the port that inputs the analog voltage to be converted into a digital signal.
(13) Port mode control register 2 (PMC2)
This register is used when the P20/ANI0/TI000/TOH1, P21/ANI1/TI010/TO00/INTP0, P22/ANI2, and P23/ANI3
pins are used as the analog input pins of the A/D converter.
相关PDF资料
PDF描述
UPD78F9222CS-CAC-A MCU 8BIT 4KB FLASH 20PIN
UPD78F9234CS-CAA-A MCU 8BIT 8KB FLASH 30PIN
UPD78F9418AGC-8BT-A IC MCU 8BIT 32K FLASH 80QFP
USB-232-DIL IC USB ASYNC SRL UART 28-DIL
USB-DAQ-DIL IC SYSTEM DATA LOGGER 28-DIL
相关代理商/技术参数
参数描述
UPD78F9212FH(T)-2A2-A 制造商:Renesas Electronics Corporation 功能描述:
UPD78F9212FH-2A2-A 制造商:Renesas Electronics Corporation 功能描述:
UPD78F9212FH-2A2-E1-A 制造商:Renesas Electronics Corporation 功能描述:
UPD78F9212GR(T)-JJG 制造商:Renesas Electronics Corporation 功能描述: 制造商:NEC Electronics Corporation 功能描述: 制造商:NEC Electronics Corporation 功能描述:8-BIT, FLASH, 10 MHz, MICROCONTROLLER, PDSO16
UPD78F9212GR(T)-JJG-A 制造商:NEC Electronics Corporation 功能描述:8BIT MCU 4K FLASH 128B RAM 78F9212