参数资料
型号: UPD78F9212CS-CAB-A
厂商: Renesas Electronics America
文件页数: 74/175页
文件大小: 0K
描述: MCU 8BIT 4KB FLASH 16PIN
标准包装: 400
系列: 78K0S/Kx1+
核心处理器: 78K0S
芯体尺寸: 8-位
速度: 10MHz
外围设备: LVD,POR,PWM,WDT
输入/输出数: 13
程序存储器容量: 4KB(4K x 8)
程序存储器类型: 闪存
RAM 容量: 128 x 8
电压 - 电源 (Vcc/Vdd): 2 V ~ 5.5 V
数据转换器: A/D 4x10b
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 16-DIP(0.300",7.62mm)
包装: 托盘
CHAPTER 9 A/D CONVERTER (
μPD78F921x ONLY)
User’s Manual U16994EJ6V0UD
163
Notes 3. Set the sampling time as follows.
VDD ≥ 4.5 V:
1.0
μs or more
VDD ≥ 4.0 V:
2.4
μs or more
VDD ≥ 2.85 V:
3.0
μs or more
VDD ≥ 2.7 V:
11.0
μs or more
4. Set the A/D conversion time as follows.
VDD ≥ 4.5 V:
3.0
μs or more and less than 100 μs
VDD ≥ 4.0 V:
4.8
μs or more and less than 100 μs
VDD ≥ 2.85 V:
6.0
μs or more and less than 100 μs
VDD ≥ 2.7 V:
14.0
μs or more and less than 100 μs
5.
Setting is prohibited because the values do not satisfy the condition of Notes 3 or 4.
6.
The operation of the comparator is controlled by ADCS and ADCE, and it takes 1
μs from
operation start to operation stabilization. Therefore, when ADCS is set to 1 after 1
μs or more
has elapsed from the time ADCE is set to 1, the conversion result at that time has priority over
the first conversion result. If the ADCS is set to 1 without waiting for 1
μs or longer, ignore the
first conversion data.
Table 9-2. Settings of ADCS and ADCE
ADCS
ADCE
A/D Conversion Operation
0
Stop status (DC power consumption path does not exist)
0
1
Conversion waiting mode (only comparator consumes power)
1
×
Conversion mode
Figure 9-4. Timing Chart When Comparator Is Used
ADCE
Comparator
ADCS
Conversion
operation
Conversion
operation
Conversion stopped
Conversion
waiting
Comparator operating
Note
Note The time from the rising of the ADCE bit to the rising of the ADCS bit must be 1
μs or longer to stabilize the
internal circuit.
Cautions 1. The above sampling time and conversion time do not include the clock frequency error.
Select the conversion time taking the clock frequency error into consideration (an error
margin maximum of
±5% when using the high-speed internal oscillator).
2. If a bit other than ADCS of ADM is manipulated while A/D conversion is stopped (ADCS = 0)
and then A/D conversion is started, execute two NOP instructions or an instruction
equivalent to two machine cycles, and set ADCS to 1.
3. A/D conversion must be stopped (ADCS = 0) before rewriting bits FR0 to FR2.
4. Be sure to clear bits 6, 2, and 1 to 0.
相关PDF资料
PDF描述
UPD78F9222CS-CAC-A MCU 8BIT 4KB FLASH 20PIN
UPD78F9234CS-CAA-A MCU 8BIT 8KB FLASH 30PIN
UPD78F9418AGC-8BT-A IC MCU 8BIT 32K FLASH 80QFP
USB-232-DIL IC USB ASYNC SRL UART 28-DIL
USB-DAQ-DIL IC SYSTEM DATA LOGGER 28-DIL
相关代理商/技术参数
参数描述
UPD78F9212FH(T)-2A2-A 制造商:Renesas Electronics Corporation 功能描述:
UPD78F9212FH-2A2-A 制造商:Renesas Electronics Corporation 功能描述:
UPD78F9212FH-2A2-E1-A 制造商:Renesas Electronics Corporation 功能描述:
UPD78F9212GR(T)-JJG 制造商:Renesas Electronics Corporation 功能描述: 制造商:NEC Electronics Corporation 功能描述: 制造商:NEC Electronics Corporation 功能描述:8-BIT, FLASH, 10 MHz, MICROCONTROLLER, PDSO16
UPD78F9212GR(T)-JJG-A 制造商:NEC Electronics Corporation 功能描述:8BIT MCU 4K FLASH 128B RAM 78F9212