参数资料
型号: UPD78F9212CS-CAB-A
厂商: Renesas Electronics America
文件页数: 85/175页
文件大小: 0K
描述: MCU 8BIT 4KB FLASH 16PIN
标准包装: 400
系列: 78K0S/Kx1+
核心处理器: 78K0S
芯体尺寸: 8-位
速度: 10MHz
外围设备: LVD,POR,PWM,WDT
输入/输出数: 13
程序存储器容量: 4KB(4K x 8)
程序存储器类型: 闪存
RAM 容量: 128 x 8
电压 - 电源 (Vcc/Vdd): 2 V ~ 5.5 V
数据转换器: A/D 4x10b
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 16-DIP(0.300",7.62mm)
包装: 托盘
CHAPTER 9 A/D CONVERTER (
μPD78F921x ONLY)
User’s Manual U16994EJ6V0UD
173
9.6
Cautions for A/D Converter
(1) Operating current in STOP mode
To satisfy the DC characteristics of the supply current in the STOP mode, clear bit 7 (ADCS) and bit 0 (ADCE) of
the A/D converter mode register (ADM) to 0 before executing the STOP instruction.
(2) Input range of ANI0 to ANI3
Observe the rated range of the ANI0 to ANI3 input voltage. If a voltage of VDD or higher and VSS or lower (even in
the range of absolute maximum ratings) is input to an analog input channel, the converted value of that channel
becomes undefined. In addition, the converted values of the other channels may also be affected.
(3) Conflicting operations
<1>
Conflict between A/D conversion result register (ADCR, ADCRH) write and ADCR, ADCRH read by
instruction upon the end of conversion
ADCR, ADCRH read has priority. After the read operation, the new conversion result is written to ADCR,
ADCRH.
<2>
Conflict between ADCR, ADCRH write and A/D converter mode register (ADM) write or analog input
channel specification register (ADS) write upon the end of conversion
ADM or ADS write has priority. ADCR, ADCRH write is not performed, nor is the conversion end interrupt
signal (INTAD) generated.
(4) Noise countermeasures
To maintain the 10-bit resolution, attention must be paid to noise input to the VDD pin and ANI0 to ANI3 pins.
<1>
Connect a capacitor with a low equivalent resistance and a high frequency response to the power supply.
<2>
Because the effect increases in proportion to the output impedance of the analog input source, it is
recommended that a capacitor be connected externally, as shown in Figure 9-19, to reduce noise.
<3>
Do not switch the A/D conversion function of the ANI0 to ANI3 pins to their alternate functions during
conversion.
<4>
The conversion accuracy can be improved by setting HALT mode immediately after the conversion starts.
Figure 9-19. Analog Input Pin Connection
Reference
voltage
input
C = 0.01 to 0.1 F
If there is a possibility that noise equal to or higher than VDD or
equal to or lower than VSS may enter, clamp with a diode with a
small VF value (0.3 V or lower).
VDD
VSS
ANI0 to ANI3
μ
相关PDF资料
PDF描述
UPD78F9222CS-CAC-A MCU 8BIT 4KB FLASH 20PIN
UPD78F9234CS-CAA-A MCU 8BIT 8KB FLASH 30PIN
UPD78F9418AGC-8BT-A IC MCU 8BIT 32K FLASH 80QFP
USB-232-DIL IC USB ASYNC SRL UART 28-DIL
USB-DAQ-DIL IC SYSTEM DATA LOGGER 28-DIL
相关代理商/技术参数
参数描述
UPD78F9212FH(T)-2A2-A 制造商:Renesas Electronics Corporation 功能描述:
UPD78F9212FH-2A2-A 制造商:Renesas Electronics Corporation 功能描述:
UPD78F9212FH-2A2-E1-A 制造商:Renesas Electronics Corporation 功能描述:
UPD78F9212GR(T)-JJG 制造商:Renesas Electronics Corporation 功能描述: 制造商:NEC Electronics Corporation 功能描述: 制造商:NEC Electronics Corporation 功能描述:8-BIT, FLASH, 10 MHz, MICROCONTROLLER, PDSO16
UPD78F9212GR(T)-JJG-A 制造商:NEC Electronics Corporation 功能描述:8BIT MCU 4K FLASH 128B RAM 78F9212