参数资料
型号: W25X64VSFIG
厂商: Winbond Electronics
文件页数: 8/50页
文件大小: 0K
描述: IC FLASH 64MBIT 75MHZ 16SOIC
标准包装: 44
系列: SpiFlash®
格式 - 存储器: 闪存
存储器类型: FLASH
存储容量: 64M(8M x 8)
速度: 75MHz
接口: SPI 串行
电源电压: 2.7 V ~ 3.6 V
工作温度: -40°C ~ 85°C
封装/外壳: 16-SOIC(0.295",7.50mm 宽)
供应商设备封装: 16-SOIC
包装: 管件
W25X16, W25X16A, W25X32, W25X64
9.1
Package Types
At the time this datasheet was published not all package types had been finalized. Contact Winbond
to confirm availability of these packages before designing to this specification. W25X16A is offered in
an 8-pin plastic 150-mil width SOIC (package code SN). W25X16/16A and W25X32 are offered in an
8-pin plastic 208-mil width SOIC (package code SS). The W25X16/16A in 6x5-mm WSON (package
code ZP) and 25X32 and 25X64 in 8x6-mm WSON (package code ZE). The 25X16/16A, W25X32 and
W25X64 are offered in 16-pin plastic 300-mil width SOIC (package code SF) and 300-mil DIP
(package code DA). See figures 1a-e. Package diagrams and dimensions are illustrated at the end of
this datasheet.
9.2
Chip Select (/CS)
The SPI Chip Select (/CS) pin enables and disables device operation. When /CS is high the device is
deselected and the Serial Data Output (DO) pin is at high impedance. When deselected, the devices
power consumption will be at standby levels unless an internal erase, program or status register cycle
is in progress. When /CS is brought low the device will be selected, power consumption will increase
to active levels and instructions can be written to and data read from the device. After power-up, /CS
must transition from high to low before a new instruction will be accepted. The /CS input must track
the VCC supply level at power-up (see “Write Protection” and figure 20). If needed a pull-up resister
on /CS can be used to accomplish this.
9.3
Serial Data Output (DO)
The SPI Serial Data Output (DO) pin provides a means for data and status to be serially read from
(shifted out of) the device. Data is shifted out on the falling edge of the Serial Clock (CLK) input pin.
9.4
Write Protect (/WP)
The Write Protect (/WP) pin can be used to prevent the Status Register from being written. Used in
conjunction with the Status Register’s Block Protect (BP2, BP1, and BP0) bits and Status Register
Protect (SRP) bits, a portion or the entire memory array can be hardware protected. The /WP pin is
active low.
9.5
HOLD (/HOLD)
The /HOLD pin allows the device to be paused while it is actively selected. When /HOLD is brought
low, while /CS is low, the DO pin will be at high impedance and signals on the DIO and CLK pins will
be ignored (don’t care). When /HOLD is brought high, device operation can resume. The /HOLD
function can be useful when multiple devices are sharing the same SPI signals. (“See Hold function”)
9.6
Serial Clock (CLK)
The SPI Serial Clock Input (CLK) pin provides the timing for serial input and output operations. ("See
SPI Operations")
9.7
Serial Data Input / Output (DIO)
The SPI Serial Data Input/Output (DIO) pin provides a means for instructions, addresses and data to
be serially written to (shifted into) the device. Data is latched on the rising edge of the Serial Clock
(CLK) input pin. The DIO pin is also used as an output when the Fast Read Dual Output instruction is
executed.
-8-
相关PDF资料
PDF描述
R2D-1515/HP-R CONV DC/DC 2W 15VIN +/-15VOUT
TAJA105K035RNJ CAP TANT 1UF 35V 10% 1206
ABC35DREF-S734 CONN EDGECARD 70POS .100 EYELET
R2D-1512/HP-R CONV DC/DC 2W 15VIN +/-12VOUT
VE-J0T-IZ CONVERTER MOD DC/DC 6.5V 25W
相关代理商/技术参数
参数描述
W25X64VSFIZ 制造商:WINBOND 制造商全称:Winbond 功能描述:16M-BIT, 32M-BIT, AND 64M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI
W25X64VSSI 制造商:WINBOND 制造商全称:Winbond 功能描述:16M-BIT, 32M-BIT, AND 64M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI
W25X64VSSIG 制造商:WINBOND 制造商全称:Winbond 功能描述:16M-BIT, 32M-BIT, AND 64M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI
W25X64VSSIZ 制造商:WINBOND 制造商全称:Winbond 功能描述:16M-BIT, 32M-BIT, AND 64M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI
W25X64VZEI 制造商:WINBOND 制造商全称:Winbond 功能描述:16M-BIT, 32M-BIT, AND 64M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI