- 您现在的位置：买卖IC网 > PDF目录225535 > W9412G6CH-5 (WINBOND ELECTRONICS CORP) 8M X 16 DDR DRAM, 0.7 ns, PDSO66 PDF资料下载
参数资料
| 型号： | W9412G6CH-5 |
| 厂商： | WINBOND ELECTRONICS CORP |
| 元件分类： | DRAM |
| 英文描述： | 8M X 16 DDR DRAM, 0.7 ns, PDSO66 |
| 封装： | 0.400 INCH, 0.65 MM PITCH, ROHS COMPLIANT, TSOP2-66 |
| 文件页数： | 4/55页 |
| 文件大小： | 2011K |
| 代理商： | W9412G6CH-5 |
第1页第2页第3页当前第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页
W9412G6CH
Publication Release Date:Nov. 19, 2007
- 12 -
Revision A07
7.2.16 Data Write Enable /Disable Command
(DM = “L/H” or LDM, UDM = “L/H”)
During a Write cycle, the DM or LDM, UDM signal functions as Data Mask and can control every
word of the input data. The LDM signal controls DQ0 to DQ7 and UDM signal controls DQ8 to
DQ15.
7.3 Read Operation
Issuing the Bank Activate command to the idle bank puts it into the active state. When the Read
command is issued after tRCD from the Bank Activate command, the data is read out sequentially,
synchronized with both edges of DQS (Burst Read operation). The initial read data becomes available
after CAS Latency from the issuing of the Read command. The CAS Latency must be set in the Mode
Register at power-up.
When the Precharge Operation is performed on a bank during a Burst Read and operation, the Burst
operation is terminated.
When the Read with Auto-precharge command is issued, the Precharge operation is performed
automatically after the Read cycle then the bank is switched to the idle state. This command cannot
be interrupted by any other commands. Refer to the diagrams for Read operation.
7.4 Write Operation
Issuing the Write command after tRCD from the bank activate command. The input data is latched
sequentially, synchronizing with both edges(rising & falling) of DQS after the Write command (Burst
write operation). The burst length of the Write data (Burst Length) and Addressing Mode must be set
in the Mode Register at power-up.
When the Precharge operation is performed in a bank during a Burst Write operation, the Burst
operation is terminated.
When the Write with Auto-precharge command is issued, the Precharge operation is performed
automatically after the Write cycle, then the bank is switched to the idle state, The Write with Auto-
precharge command cannot be interrupted by any other command for the entire burst data duration.
Refer to the diagrams for Write operation.
7.5 Precharge
There are two Commands, which perform the precharge operation (Bank Precharge and Precharge
All). When the Bank Precharge command is issued to the active bank, the bank is precharged and
then switched to the idle state. The Bank Precharge command can precharge one bank independently
of the other bank and hold the unprecharged bank in the active state. The maximum time each bank
can be held in the active state is specified as tRAS (max). Therefore, each bank must be precharged
within tRAS(max) from the bank activate command.
The Precharge All command can be used to precharge all banks simultaneously. Even if banks are
not in the active state, the Precharge All command can still be issued. In this case, the Precharge
operation is performed only for the active bank and the precharge bank is then switched to the idle
state.
相关PDF资料 |
PDF描述 |
|---|---|
| W942504CH-7 | 64M X 4 DDR DRAM, 0.75 ns, PDSO66 |
| W9864G6IH-6 | 4M X 16 DDR DRAM, 5 ns, PDSO54 |
| WA-1RX33-A4 | SNAP ACTING/LIMIT SWITCH |
| WA-A325CBM | Peripheral Interface |
| WA-A325CPC | Peripheral Interface |
相关代理商/技术参数 |
参数描述 |
|---|---|
| W9412G6IH | 制造商:WINBOND 制造商全称:Winbond 功能描述:2M × 4 BANKS × 16 BITS DDR SDRAM |
| W9412G6IH-5 | 功能描述:IC DDR-400 SDRAM 128MB 66TSSOPII RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:1,000 系列:- 格式 - 存储器:EEPROMs - 串行 存储器类型:EEPROM 存储容量:4K (512 x 8) 速度:400kHz 接口:I²C，2 线串口 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 封装/外壳:8-SOIC（0.173"，4.40mm 宽） 供应商设备封装:8-MFP 包装:带卷 (TR) |
| W9412G6JH | 制造商:WINBOND 制造商全称:Winbond 功能描述:2M ? 4 BANKS ? 16 BITS DDR SDRAM |
| W9412G6JH-4 | 制造商:Winbond Electronics Corp 功能描述:8*16B DDR1 制造商:Winbond Electronics Corp 功能描述:IC DDR SDRAM 128M 250MHZ 66TSOP |
| W9412G6JH-5 | 制造商:Winbond Electronics Corp 功能描述:DRAM Chip DDR SDRAM 128M-Bit 8Mx16 2.5V 66-Pin TSOP 制造商:Winbond Electronics Corp 功能描述:128M BIT DDR1 |
发布紧急采购，3分钟左右您将得到回复。