参数资料
型号: WBLXT974BHCA8
厂商: CORTINA SYSTEMS INC
元件分类: 网络接口
英文描述: DATACOM, ETHERNET TRANSCEIVER, PQFP160
封装: ROHS COMPLIANT, PLASTIC, MS-002DD-1, HQFP-160
文件页数: 35/76页
文件大小: 1004K
代理商: WBLXT974BHCA8
LXT974/LXT975 — Fast Ethernet 10/100 Quad Transceivers
40
Datasheet
3.0
Application Information
3.1
Design Recommendations
The LXT974/975 is designed to comply with IEEE requirements and to provide outstanding
receive Bit Error Rate (BER) and long-line-length performance. Lab testing has shown that the
LXT974/975 can perform well beyond the required distance of 100 meters. To achieve maximum
performance from the LXT974/975, attention to detail and good design practices are required.
Refer to the LXT974/975 Design and Layout Guide for detailed design and layout information.
3.1.1
General Design Guidelines
Adherence to generally accepted design practices is essential to minimize noise levels on power
and ground planes. Up to 50 mV of noise is considered acceptable. 50 to 80 mV of noise is
considered marginal. High-frequency switching noise can be reduced, and its effects can be
eliminated, by following these simple guidelines throughout the design:
Fill in unused areas of the signal planes with solid copper and attach them with vias to a VCC
or ground plane that is not located adjacent to the signal layer.
Use ample bulk and decoupling capacitors throughout the design (a value of .01
μF is
recommended for decoupling caps).
Provide ample power and ground planes.
Provide termination on all high-speed switching signals and clock lines.
Provide impedance matching on long traces to prevent reflections.
Route high-speed signals next to a continuous, unbroken ground plane.
Filter and shield DC-DC converters, oscillators, etc.
Do not route any digital signals between the LXT974/975 and the RJ-45 connectors at the edge
of the board.
Do not extend any circuit power and ground plane past the center of the magnetics or to the
edge of the board. Use this area for chassis ground, or leave it void.
3.1.2
Power Supply Filtering
Power supply ripple and digital switching noise on the VCC plane can cause EMI problems and
degrade line performance. It is generally difficult to predict in advance the performance of any
design, although certain factors greatly increase the risk of having these problems:
Poorly-regulated or over-burdened power supplies.
Wide data busses (>32-bits) running at a high clock rate.
DC-to-DC converters.
Many of these issues can be improved just by following good general design guidelines. In
addition, Intel also recommends filtering between the power supply and the analog VCC pins of the
LXT974/975. Filtering has two benefits. First, it keeps digital switching noise out of the analog
相关PDF资料
PDF描述
WBLXT9785EHC.C2V DATACOM, INTERFACE CIRCUIT, PQFP208
WBLXT9785EHC.D0-865110 DATACOM, INTERFACE CIRCUIT, PQFP208
WBLXT9785EHC.D0-865111 DATACOM, INTERFACE CIRCUIT, PQFP208
WBLXT9785EHC.D0 DATACOM, INTERFACE CIRCUIT, PQFP208
WBLXT9785HC.C2V DATACOM, INTERFACE CIRCUIT, PQFP208
相关代理商/技术参数
参数描述
WBLXT975BHC.A8 功能描述:IC ENET 10/100QUAD TXCVR 160HQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:25 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:4.5 V ~ 5.5 V 安装类型:通孔 封装/外壳:16-DIP(0.300",7.62mm) 供应商设备封装:16-PDIP 包装:管件
WBLXT9785EHC.D0865110 功能描述:IC TXRX 8PORT ETHERNET 208-HQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:1,000 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-SOIC(0.295",7.50mm 宽) 供应商设备封装:16-SOIC 包装:带卷 (TR)
WBLXT9785EHC.D0-865110 制造商:Cortina Systems Inc 功能描述:PHY 8-CH 10Mbps/100Mbps 208-Pin PQFP
WBLXT9785EHC.D0-865111 制造商:Cortina Systems Inc 功能描述:PHY 8-CH 10Mbps/100Mbps 208-Pin PQFP
WBLXT9785HC.D0 功能描述:IC TXRX 8PORT ETHERNET 208-HQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:1,000 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-SOIC(0.295",7.50mm 宽) 供应商设备封装:16-SOIC 包装:带卷 (TR)