参数资料
| 型号： | X9110TV14ZT1 |
| 厂商： | Intersil |
| 文件页数： | 14/18页 |
| 文件大小： | 0K |
| 描述： | IC XDCP 1024-TAP 100K 14-TSSOP |
| 标准包装： | 2,500 |
| 系列： | XDCP™ |
| 接片： | 1024 |
| 电阻（欧姆）： | 100k |
| 电路数： | 1 |
| 温度系数： | 标准值 ±300 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | 4 线 SPI（芯片选择，设备位址） |
| 电源电压： | 4.5 V ~ 5.5 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 14-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 14-TSSOP |
| 包装： | 带卷 (TR) |
5
FN8158.3
February 13, 2008
may be written indirectly by transferring the contents of one
of four associated Data Registers via the XFR Data Register;
(3) it is loaded with the contents of its data register zero
(DR0) upon power-up.
The Wiper Counter Register is a volatile register; that is, its
contents are lost when the X9110 is powered-down. Although
the register is automatically loaded with the value in DR0 upon
power-up, this may be different from the value present at
power-down. Power-up guidelines are recommended to ensure
proper loadings of the DR0 value into the WCR.
DATA REGISTERS (DR)
The potentiometer has four 10-bit non-volatile Data
Registers. These can be read or written directly by the host.
Data can also be transferred between any of the four Data
Registers and the Wiper Counter Register. All operations
changing data in one of the Data Registers is a nonvolatile
operation and will take a maximum of 10ms.
If the application does not require storage of multiple
settings for the potentiometer, the Data Registers can be
used as regular memory locations for system parameters or
user preference data.
DR[9:0] is used to store one of the 1024 wiper position
(0~1023) (see Table 2).
STATUS REGISTER (SR)
This 1-bit status register is used to store the system status
(see Table 3).
WIP: Write In Progress status bit, read only.
When WIP = 1, indicates that high-voltage write cycle is in
progress.
When WIP=0, indicates that no high-voltage write cycle is
in progress.
TABLE 3. STATUS REGISTER, SR (1-BIT)
TABLE 1. WIPER CONTROL REGISTER, WCR (10-BIT), WCR9–WCR0: Used To Store The Current Wiper Position (Volatile, V)
WCR9
WCR8
WCR7
WCR6
WCR5
WCR4
WCR3
WCR2
WCR1
WCR0
VVV
VVVVVVV
(MSB)
(LSB)
TABLE 2. DATA REGISTER, DR (10-BIT), BIT 9–BIT 0: Used to store wiper positions or data (Non-Volatile, NV)
BIT 9
BIT 8
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
NV
MSB
LSB
WIP
(LSB)
X9110
相关PDF资料 |
PDF描述 |
|---|---|
| MS3452L28-21P | CONN RCPT 37POS BOX MNT W/PINS |
| X9420YS16Z-2.7 | IC DGTL POT 2.5K 1CH 16SOIC |
| VI-JV2-MZ-S | CONVERTER MOD DC/DC 15V 25W |
| M83723/82G08039 | CONN RCPT 3POS WALL MT W/SCKT |
| VI-J4H-MZ-S | CONVERTER MOD DC/DC 52V 25W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| X9111 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Single Supply/Low Power/1024-Tap/SPI Bus |
| X9111_06 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Single Digitally-Controlled (XDCP⑩) Potentiometer |
| X9111TB15 | 制造商:XICOR 制造商全称:Xicor Inc. 功能描述:Single Digitally-Controlled Potentiometer |
| X9111TB15-2.7 | 制造商:XICOR 制造商全称:Xicor Inc. 功能描述:Single Digitally-Controlled Potentiometer |
| X9111TB15I | 制造商:XICOR 制造商全称:Xicor Inc. 功能描述:Single Digitally-Controlled Potentiometer |
发布紧急采购，3分钟左右您将得到回复。