- 您现在的位置：买卖IC网 > Datasheet目录590 > 1-1804834-1 (TE Connectivity)TOOL HAND CRIMPPER 12-26AWG Datasheet资料下载
参数资料
| 型号： | 1-1804834-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 4/5页 |
| 文件大小： | 0K |
| 描述： | TOOL HAND CRIMPPER 12-26AWG |
| 标准包装： | 1 |
| 系列： | Certi-Crimp |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 接头，12-26 AWG |
| 特点： | 侧面插入，棘齿 |
| 配用： | A101228-ND - SPLICE IN-LINE CRIMP YELLOW TIN A101227-ND - SPLICE IN-LINE CRIMP BLUE TIN D-436-36CS454-ND - SPLICE IN-LINE CRIMP RED TIN A101226-ND - SPLICE IN-LINE CRIMP RED TIN |
Hand Crimping Tool 1804834- 1 and Crimping Head 1- 1804834- 1
408- 10048
Crimping
Chamber
bottomed. Obtain a 0.025 [.001] shim suitable for
checking the clearance between the bottoming
surfaces of the crimping jaws. Proceed as follows:
GO
Element
NO-- GO
Element
1. Select a terminal or splice, and properly stripped
wire with maximum wire load (such as wire size 16
AWG and size 22--16 terminal).
20--26
16--20
12--16
“GO” element must pass “NO-- GO” element may enter
completely through partially, but must not pass
crimping chamber. completely through the
crimping chamber.
DAHT 1804834-- 1 For Raychem MiniSeal Splices
Tool Die Closure “A” Gage Elements “B”
Cavity GO NO-- GO GO NO-- GO
0.64 0.81 0.635--0.643 0.836--0.838
[.025] [.032] [.0250--.0253] [.0329--.0330]
1.07 1.24 1.067--1.074 1.267--1.27
[.042] [.049] [.0420--.0423] [.0499--.0500]
1.57 1.75 1.575--1.582 1.775--1.778
[.062] [.069] [.0620--.0623] [.0699--.0700]
2. Position the terminal or splice and wire between
the crimping jaws, as described in Section 3.
3. Hold the wire in place and squeeze the handles
until the CERTI--CRIMP ratchet releases. Hold the
handles in this position, maintaining just enough
tension to keep the jaws closed.
4. Check the clearance between the bottoming
surfaces of the crimping jaws. If the clearance is
0.025 [.001] or less, the ratchet is satisfactory. If
clearance exceeds 0.025 [.001], the ratchet is out
of adjustment and must be repaired. See Section
6, REPLACEMENT AND REPAIR.
“B”
Dia.
GO Dim.
Die Closure Configuration
“A” Dim.
Figure 6
NO-- GO Dim.
“B”
Dia.
50.8 [2.00]
Min. Typ.
6. REPLACEMENT AND REPAIR
Customer--replaceable parts are listed in Figure 7.
A complete inventory should be stocked and
controlled to prevent lost time when replacement of
parts is necessary. Parts other than those listed
should be replaced by Tyco Electronics to ensure
quality and reliability. Order replacement parts
through your Tyco Electronics Representative, or call
1--800--526--5142, or send a facsimile of your
purchase order to 717--986--7605, or write to:
4. Align the NO--GO element and try to insert it
straight into the same crimping chamber. The
NO--GO element may start entry, but must not
pass completely through the crimping chamber.
If the crimping chambers conforms to the gage
inspection, the tool is considered dimensionally
correct, and should be lubricated with a THIN coat of
any good SAE 20 motor oil. If not, the tool must be
returned for further evaluation and repair. Refer to
Section 6, REPLACEMENT AND REPAIR.
5.5. CERTI- CRIMP Ratchet Inspection
The CERTI--CRIMP ratchet should be checked to
ensure that the ratchet does not release prematurely,
allowing the jaws to open before they have fully
CUSTOMER SERVICE (038--035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105--3608
Tools may also be returned to Tyco Electronics for
evaluation and repair. For customer repair service,
please contact a Tyco Electronics Representative at
1--800--526--5136.
7. REVISION SUMMARY
Since the previous release, the following change was
made:
S Changed the strip length in Figure 3
4 of 5
Tyco Electronics Corporation
Rev B
相关PDF资料 |
PDF描述 |
|---|---|
| 1-220155-0 | TOOL DIE ASSY 10POS RIBBON COAX |
| 1-231666-1 | TOOL MODULAR PRODUCTION KIT |
| 1-265871-7 | TOOL PIN REPLACEMENT |
| 1-543013-6 | TOOL DIE SET CRIMP .280 CABLE |
| 1-576781-0 | TOOL HEAD CRIMP 16AWG STRATO |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1-1804872-0 | 功能描述:手工工具 SEATING TL ASSY POW/SIG/POW RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 1-1804872-1 | 制造商:TE Connectivity 功能描述:SEATING TI ASSY, POW/SIG/POW - Bulk |
| 1-1804872-3 | 功能描述:手工工具 SEATING TL ASSY, POW/SIG/POW RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 1-1804872-4 | 功能描述:SEATING TL ASSY, POW/SIG/POW 制造商:te connectivity amp connectors 系列:* 零件状态:在售 标准包装:1 |
| 1-1804872-5 | 功能描述:SEATING TL ASSY, POW/SIG/POW 制造商:te connectivity amp connectors 系列:* 零件状态:在售 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。