- 您现在的位置：买卖IC网 > Datasheet目录601 > 58558-1 (TE Connectivity)CONSUMER BNC TOOL RG 58/59 Datasheet资料下载
参数资料
| 型号： | 58558-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/5页 |
| 文件大小： | 0K |
| 描述： | CONSUMER BNC TOOL RG 58/59 |
| 标准包装： | 5 |
| 系列： | Pro-Crimper III |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 同轴，RF - BNC |
| 特点： | 侧面插入，棘齿 |
Figure 2
engaged sufficiently to hold the dies in place, then
tighten both die retaining screws.
1. Close the tool handles until the ratchet releases,
then allow the handles to open fully.
2. Remove the two die retaining screws from the
tool jaws.
3. Install the anvil die in the movable jaw of the tool
frame. Insert the short die retaining screw through
the retaining hole in the jaw and through the anvil
die. Tighten the screw just enough to hold the die
in place. Do not tighten the screw completely at
this time.
4. Install the indenter die in the stationary jaw of
the tool frame. Insert the long die retaining screw
through the retaining hole in the jaw and through
the indenter die. Tighten the screw just enough to
hold the die in place. Do not tighten the screw
completely at this time.
5. Carefully close the tool handles, making sure
that the dies align properly. Continue closing the
tool handles until the ratchet in the tool frame has
6. Attach the straightener onto the spring retainer
with the adjustment screw. Insert the spring into
the spring retainer and place the locator over the
spring.
7. While holding the locator against the spring
retainer, place the screw hole in the spring retainer
over the end of the long die retaining screw. The
locator should be against the side of the tool jaw.
8. Place the nut onto the end of the long die
retaining screw and tighten the nut enough to hold
the locator and straightener assembly in place, but
still allowing the locator to slide up and down.
9. To disassemble, close the tool handles until the
ratchet releases. Remove the nut, the locator and
straightener assembly, and the two die retaining
screws. Slide the anvil and indenter out of the tool
jaws.
相关PDF资料 |
PDF描述 |
|---|---|
| 58560-1 | TOOL CRIMP MODULAR 10 POS W/DIE |
| 58605-2 | PROCRIMP DIE JPT W/SEAL |
| 58638-1 | TOOL TERM HEAD MTA .100 PIN |
| 58644-1 | TOOL HEAD MTA .100 MASS INSERT |
| 58646-1 | TOOL HEAD MTA .156 MASS INSERT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 58558-2 | 功能描述:冲压机与冲模 CONSUMER BNC DIE SET RG 58/59 RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 58559-1 | 功能描述:手工工具 CONSUMER BNC TOOL RG 174/179 RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 58559-2 | 功能描述:冲压机与冲模 CONSUMER BNC DIE SET RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 5855B | 制造商:DISSTON 功能描述:HOLE SAW VARIPITCH HSS 14MM |
| 5855-BL005 | 制造商:Alpha Wire Company 功能描述:Hook-up Wire 1Conductors 22AWG 30.5m 1.3mm Silver Plated Copper Blue 600V |
发布紧急采购，3分钟左右您将得到回复。