- 您现在的位置：买卖IC网 > Datasheet目录601 > 58558-1 (TE Connectivity)CONSUMER BNC TOOL RG 58/59 Datasheet资料下载
参数资料
| 型号： | 58558-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/5页 |
| 文件大小： | 0K |
| 描述： | CONSUMER BNC TOOL RG 58/59 |
| 标准包装： | 5 |
| 系列： | Pro-Crimper III |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 同轴，RF - BNC |
| 特点： | 侧面插入，棘齿 |
4. Insert stripped cable into contact wire barrel until
it is butted against the locator. See cross–sectional
view in Figure 3.
5. Holding the cable in position, close the tool
handles until the ratchet releases. Allow the tool
For detailed information on cable strip lengths and
proper assembly of the connector, refer to the
handles to open fully and remove the crimped
center contact from the dies.
instructions packaged with the connector. Make sure
that the connector ferrule has been placed onto the
cable, and that the cable braided shield is flared away
from the cable. Then proceed as described in 4.1,
and 4.2.
1. Insert the crimped center contact into the
1. Holding the center contact by the mating end,
insert the contact through the front of the tool and
into the appropriate crimping chamber of the
anvil die.
2. Close the tool handles so that the dies partially
close. Position the contact so that the locator drops
into the contact wire stop slot and the end of the
contact is inside the groove in the straightener. See
cross–sectional view in Figure 3.
3. Hold the contact in place and squeeze the tool
handles together until the ratchet engages just
enough to hold the contact in place. Do not deform
the contact wire barrel.
Figure 3
connector body until the cable dielectric butts
against the dielectric inside the connector body or
until the center contact is securely positioned
within the connector. Make sure that the braided
shield is over the support sleeve of the connector
body and that no strands from the shield enter the
connector body.
2. Slide the ferrule up over the braided shield and
onto the connector until the ferrule butts against
the shoulder on the connector body.
3. Place the ferrule in the appropriate crimping
chamber of the anvil die so that the shoulder on
the connector body butts against the edge of
the die.
相关PDF资料 |
PDF描述 |
|---|---|
| 58560-1 | TOOL CRIMP MODULAR 10 POS W/DIE |
| 58605-2 | PROCRIMP DIE JPT W/SEAL |
| 58638-1 | TOOL TERM HEAD MTA .100 PIN |
| 58644-1 | TOOL HEAD MTA .100 MASS INSERT |
| 58646-1 | TOOL HEAD MTA .156 MASS INSERT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 58558-2 | 功能描述:冲压机与冲模 CONSUMER BNC DIE SET RG 58/59 RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 58559-1 | 功能描述:手工工具 CONSUMER BNC TOOL RG 174/179 RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 58559-2 | 功能描述:冲压机与冲模 CONSUMER BNC DIE SET RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 5855B | 制造商:DISSTON 功能描述:HOLE SAW VARIPITCH HSS 14MM |
| 5855-BL005 | 制造商:Alpha Wire Company 功能描述:Hook-up Wire 1Conductors 22AWG 30.5m 1.3mm Silver Plated Copper Blue 600V |
发布紧急采购，3分钟左右您将得到回复。