- 您现在的位置：买卖IC网 > Datasheet目录601 > 58558-1 (TE Connectivity)CONSUMER BNC TOOL RG 58/59 Datasheet资料下载
参数资料
| 型号： | 58558-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 5/5页 |
| 文件大小： | 0K |
| 描述： | CONSUMER BNC TOOL RG 58/59 |
| 标准包装： | 5 |
| 系列： | Pro-Crimper III |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 同轴，RF - BNC |
| 特点： | 侧面插入，棘齿 |
1. Remove dust, moisture, and other contaminants
with a clean, soft brush, or a clean, soft, lint–free
cloth. Do NOT use any objects that could damage
the dies or tool.
2. Make sure that the proper die retaining screws
are properly secured.
3. When the dies are not in use, mate and store
them in a clean, dry area.
4. Store the tool with the tool handles closed to
prevent objects from becoming lodged within the
jaws.
1. Remove all lubrication and accumulated film
from the dies by immersing the dies in a suitable
commercial degreaser.
2. Make certain that all die retaining screws and
die components are properly secured.
3. Inspect the crimping surfaces for flattened,
chipped, worn, or cracked areas. If damage is
evident, the dies must be replaced. Refer to
Section 8, DIE REPLACEMENT.
The die assembly will perform correctly as long as:
(1) the product specified is correct for the application,
(2) the specific die assembly is used, (3) the die
assembly has been measured to ensure that the
openings are correct, and (4) the tool has been
adjusted correctly. Figure 6 provides information on
die opening sizes.
Customer–replaceable parts are shown in Figure 1.
Available separately, PRO–CRIMPER III Hand
Crimping Tool Repair Kit 679221–1 includes a
replacement nut and a variety of pins, rings, screws,
and springs.
If the dies are damaged or worn excessively, they
must be replaced. Order the repair kit and
replaceable parts through your Tyco Electronics
representative, or call 1–800–526–5142, or send a
facsimile of your purchase order to 1–717–986–7605,
or write to:
CUSTOMER SERVICE (38–35)
TYCO ELECTRONICS
PO BOX 3608
HARRISBURG PA 17105–3608
Figure 6
Since the previous of this instruction sheet, the
following changes were made:
PRO–CRIMPER II Hand Tool was changed to
PRO–CRIMPER III Hand Tool,
The TE logo was applied, and
The format was updated to the current
corporate requirements.
相关PDF资料 |
PDF描述 |
|---|---|
| 58560-1 | TOOL CRIMP MODULAR 10 POS W/DIE |
| 58605-2 | PROCRIMP DIE JPT W/SEAL |
| 58638-1 | TOOL TERM HEAD MTA .100 PIN |
| 58644-1 | TOOL HEAD MTA .100 MASS INSERT |
| 58646-1 | TOOL HEAD MTA .156 MASS INSERT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 58558-2 | 功能描述:冲压机与冲模 CONSUMER BNC DIE SET RG 58/59 RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 58559-1 | 功能描述:手工工具 CONSUMER BNC TOOL RG 174/179 RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 58559-2 | 功能描述:冲压机与冲模 CONSUMER BNC DIE SET RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 5855B | 制造商:DISSTON 功能描述:HOLE SAW VARIPITCH HSS 14MM |
| 5855-BL005 | 制造商:Alpha Wire Company 功能描述:Hook-up Wire 1Conductors 22AWG 30.5m 1.3mm Silver Plated Copper Blue 600V |
发布紧急采购，3分钟左右您将得到回复。