- 您现在的位置：买卖IC网 > PDF目录67320 > 5962-0150601HXX (ANALOG DEVICES INC) DUAL 1-CH 14-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, CQFP68 PDF资料下载
参数资料
| 型号： | 5962-0150601HXX |
| 厂商： | ANALOG DEVICES INC |
| 元件分类： | ADC |
| 英文描述： | DUAL 1-CH 14-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, CQFP68 |
| 封装： | CERAMIC, LCC-68 |
| 文件页数： | 20/20页 |
| 文件大小： | 3511K |
| 代理商： | 5962-0150601HXX |
REV. A
AD13465
–9–
AMP-IN-X-1
100
TO AD8037
AMP-IN-X-2
Figure 2. Single-Ended Input Stage
LOADS
ENCODE
10k
ENCODE
AVCC
10k
AVCC
Figure 3. ENCODE Inputs
CURRENT MIRROR
DR OUT
DVCC
VREF
DVCC
Figure 4. Digital Output Stage
CURRENT MIRROR
D0–D13
100
DVCC
VREF
DVCC
Figure 5. Digital Output Stage
THEORY OF OPERATION
The AD13465 is a high dynamic range, 14-bit, 65 MHz pipeline
delay (three pipelines) analog-to-digital converter. The custom
analog input section provides input ranges of 1 V p-p and 2 V p-p,
and input impedance configurations of 50
, 100 , and 200 .
The AD13465 employs four monolithic ADI components per
channel (AD8037, AD8138, AD8031, and AD6644), along
with multiple passive resistor networks and decoupling capacitors
to fully integrate a complete 14-bit analog-to-digital converter.
In the single-ended input configuration, the input signal is
passed through a precision laser trimmed resistor divider allowing
the user to externally select operation with a full-scale signal of
±0.5 V or ±1.0 V by choosing the proper input terminal for the
application. The result of the resistor divider is to apply a full-scale
input approximately 0.4 V to the noninverting input of the
internal AD8037 amplifier.
The AD13465 analog input includes an AD8037 amplifier
featuring an innovative architecture that maximizes the dynamic
range capability on the amplifier’s inputs and outputs. The
AD8037 amplifier provides a high input impedance and gain for
driving the AD8138 in a single-ended-to-differential amplifier
configuration. The AD8138 has a –3 dB bandwidth at 300 MHz
and delivers a differential signal with the lowest harmonic
distortion available in a differential amplifier. The AD8138
differential outputs help balance the differential inputs to the
AD6644 maximizing the performance of the device.
The AD8031 provides the buffer for the internal reference
analog-to-digital converter. The internal reference voltage of the
AD6644 is designed to track the offsets and drifts and is used to
ensure matching over an extended temperature range of operation.
The reference voltage is connected to the output common mode
input on the AD8138. This reference voltage sets the output
common mode on the AD8138 at 2.4 V, which is the midsupply
level for the ADC.
The AD6644 has complementary analog input pins, AIN and
AIN. Each analog input is centered at 2.4 V and should swing
±0.55 V around this reference. Since AIN and AIN are
180 degrees out of phase, the differential analog input signal is
2.2 V peak-to-peak. Both analog inputs are buffered prior to the
first track-and-hold.
The AD6644 digital outputs drive 100
series resistors
(Figure 5). The result is a 14-bit parallel digital CMOS compatible
word, coded as two’s complement.
USING THE SINGLE-ENDED INPUT
The AD13465 has been designed with the user’s ease of opera-
tion in mind. Multiple input configurations have been included
on-board to allow the user a choice of input signal levels and
input impedance. The standard inputs are
±0.5 V and ±1.0 V.
The user can select the input impedance of the AD13465 on
any input by using the other inputs as alternate locations for the
GND. The following chart summarizes the impedance options
available at each input location.
AMP-IN-X-1 = 100
when AMP-IN-X-2 is open.
AMP-IN-X-1 = 50
when AMP-IN-X-2 is shorted to GND.
AMP-IN-X-2 = 200
when AMP-IN-X-1 is open.
Each channel has two analog inputs AMP-IN-A-1 and
AMP-IN-A-2 or AMP-IN-B-1 and AMP-IN-B-2. Use AMP-IN-A-1
or AMP-IN-B-1 when an input of
±5 V full scale is desired. Use
相关PDF资料 |
PDF描述 |
|---|---|
| 5962-0251002HXC | 1-OUTPUT 8 W DC-DC REG PWR SUPPLY MODULE |
| 5962-9213902HZC | 1-OUTPUT 12 W DC-DC REG PWR SUPPLY MODULE |
| 5962-9555902HXC | 2-OUTPUT 12 W DC-DC REG PWR SUPPLY MODULE |
| 5962-9214402HXC | 2-OUTPUT 15 W DC-DC REG PWR SUPPLY MODULE |
| 5962-9213902HXC | 1-OUTPUT 12 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 5962015062963 | 制造商: 功能描述: 制造商:undefined 功能描述: |
| 5962015063140 | 制造商: 功能描述: 制造商:undefined 功能描述: |
| 5962015063593 | 制造商: 功能描述: 制造商:undefined 功能描述: |
| 5962015063695 | 制造商: 功能描述: 制造商:undefined 功能描述: |
| 5962015067534 | 制造商: 功能描述: 制造商:undefined 功能描述: |
发布紧急采购，3分钟左右您将得到回复。