收藏本站
参数资料
型号： 71M6543GH-IGTR/F
厂商： MAXIM INTEGRATED PRODUCTS INC
元件分类： 模拟信号调理
英文描述： SPECIALTY ANALOG CIRCUIT, PQFP100
封装： LEAD FREE, LQFP-100
文件页数： 95/157页
文件大小： 2178K
代理商： 71M6543GH-IGTR/F
71M6543F/H and 71M6543G/GH Data Sheet
42
2008–2011 Teridian Semiconductor Corporation
v1.2
Table 30: The T2CON Bit Functions (SFR 0xC8)
Bit
Symbol
Function
T2CON[7]
–
Not used.
T2CON[6]
I3FR
Polarity control for INT3:
0 = falling edge.
1 = rising edge.
T2CON[5]
I2FR
Polarity control for INT2:
0 = falling edge.
1 = rising edge.
T2CON[4:0]
–
Not used.
Table 31: The IRCON Bit Functions (SFR 0xC0)
Bit
Symbol
Function
IRCON[7]
–
Not used
IRCON[6]
–
Not used
IRCON[5]
IEX6
1 = External interrupt 6 occurred and has not been cleared.
IRCON[4]
IEX5
1 = External interrupt 5 occurred and has not been cleared.
IRCON[3]
IEX4
1 = External interrupt 4 occurred and has not been cleared.
IRCON[2]
IEX3
1 = External interrupt 3 occurred and has not been cleared.
IRCON[1]
IEX2
1 = External interrupt 2 occurred and has not been cleared.
IRCON[0]
–
Not used.
TF0 and TF1 (Timer 0 and Timer 1 overflow flags) is automatically cleared by hardware when the
service routine is called (Signals T0ACK and T1ACK – port ISR – active high when the service
routine is called).
External MPU Interrupts
The seven external interrupts are the interrupts external to the 80515 core, i.e. signals that originate in
other parts of the 71M6543, for example the CE, DIO, RTC, or EEPROM interface.
The external interrupts are connected as shown in Table 32. The polarity of interrupts 2 and 3 is
programmable in the MPU via the I3FR and I2FR bits in T2CON (SFR 0xC8). Interrupts 2 and 3 should
be programmed for falling sensitivity (I3FR = I2FR = 0). The generic 8051 MPU literature states that
interrupts 4 through 6 are defined as rising-edge sensitive. Thus, the hardware signals attached to
interrupts 5 and 6 are inverted to achieve the edge polarity shown in Table 32.
Table 32: External MPU Interrupts
External
Interrupt
Connection
Polarity
Flag Reset
0
Digital I/O
see 2.5.10
automatic
1
Digital I/O
see 2.5.10
automatic
2
CE_PULSE
rising
automatic
3
CE_BUSY
falling
automatic
4
VSTAT (VSTAT[2:0] changed)
rising
automatic
5
EEPROM busy (falling), SPI (rising)
automatic
6
XFER_BUSY (falling), RTC_1SEC, RTC_1MIN, RTC_T
falling
manual
External interrupt 0 and 1 can be mapped to pins on the device using DIO resource maps. See 2.5.10
Digital I/O for more information.
相关PDF资料
PDF描述
71M6543GH-IGT/F SPECIALTY ANALOG CIRCUIT, PQFP100
71M6543G-IGT/F SPECIALTY ANALOG CIRCUIT, PQFP100
722BG 2-OUTPUT DC-DC REG PWR SUPPLY MODULE
722MG 2-OUTPUT DC-DC REG PWR SUPPLY MODULE
73M1903-IGV SPECIALTY CONSUMER CIRCUIT, PQFP32
相关代理商/技术参数
参数描述
71M6543GHT-IGT/F 制造商:Maxim Integrated Products 功能描述:3-PHASE, 128KB, PRES TEMP SENSOR, HI PREC - Bulk
71M6543GHT-IGTR/F 制造商:Maxim Integrated Products 功能描述:3-PHASE, 128KB, PRES TEMP SENSOR, HI PREC - Tape and Reel
71M6543G-IGT/F 功能描述:计量片上系统 - SoC Precision Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6543G-IGTR/F 功能描述:计量片上系统 - SoC Precision Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6543GT-IGT/F 制造商:Maxim Integrated Products 功能描述:3-PHASE, 128KK, PRES TEMP SENSOR - Bulk
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*