- 您现在的位置：买卖IC网 > Datasheet目录613 > 91910-2 (TE Connectivity)TOOL DIE SET PREMIUM COAXICON Datasheet资料下载
参数资料
| 型号： | 91910-2 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/4页 |
| 文件大小： | 0K |
| 描述： | TOOL DIE SET PREMIUM COAXICON |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III, Coaxicon |
| 压接手柄： | A9996-ND |
| 连接器类型： | 压接端子 |
| 相关产品： | A9996-ND - PRO CRIMPER HAND TOOL W/O DIES |
9. To remove the die assembly from the tool frame,
close the tool handles until the ratchet releases,
remove the two die retaining screws and four die
retaining pins, and slide the dies out of the jaws.
1. Insert the crimped center contact into the
connector body until the cable dielectric butts
against the dielectric inside the connector body or
until the center contact is securely positioned
within the connector. Make sure that the braided
shield of the cable is over the support sleeve of the
connector body and that no strands from the shield
enter the connector body.
2. Slide the ferrule over the braided shield and
onto the connector until the ferrule butts against
the shoulder of the connector body.
3. Place the ferrule in the appropriate crimping
chamber of the anvil die so that the shoulder of the
connector body butts against the edge of the die.
1. Close the tool handles until the die assembly is
partially closed.
2. Assemble the center contact onto the center
conductor of the cable, and place the center
contact on the anvil in the smallest crimping
chamber. Make sure the flange on the end of the
center contact butts against the die.
3. Holding the cable in place, close the tool
handles until the ratchet releases.
4. Allow the tool handles to open fully and remove
the crimped center contact from the dies.
Figure 2
4. While holding the assembly together, close the
tool handles until the dies have closed enough to
secure the assembly in place.
5. Carefully close the tool handles until the ratchet
releases, then allow the tool handles to open fully,
and remove the crimped connector from the dies.
相关PDF资料 |
PDF描述 |
|---|---|
| 91911-2 | PREM SDE DIE COAXICON RG 180 |
| 91912-3 | TOOL CRIMPING DIE COAXICON |
| 91963-2 | S.D.E.PREM.DIE ASSY 16-14 PIDG |
| 91964-2 | S.D.E.PREM.DIE ASSY 22-16 PIDG |
| 91965-2 | S.D.E.PREM.DIE ASSY 12-10 PIDG |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 91910-21109 | 功能描述:板对板与夹层连接器 9POS VERT PLUG RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
| 91910-21109LF | 功能描述:板对板与夹层连接器 9POS VERT PLUG RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
| 91910-21111 | 功能描述:板对板与夹层连接器 11POS VERT PLUG RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
| 91910-21111LF | 功能描述:板对板与夹层连接器 11POS VERT PLUG RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
| 91910-21115 | 功能描述:板对板与夹层连接器 15POS VERT PLUG RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
发布紧急采购，3分钟左右您将得到回复。