- 您现在的位置：买卖IC网 > Datasheet目录613 > 91912-3 (TE Connectivity)TOOL CRIMPING DIE COAXICON Datasheet资料下载
参数资料
| 型号： | 91912-3 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/4页 |
| 文件大小： | 0K |
| 描述： | TOOL CRIMPING DIE COAXICON |
| 标准包装： | 5 |
| 系列： | Certi-Crimper |
| 压接手柄： | A9996-ND |
| 连接器类型： | 同轴连接器 |
| 配用： | 201144-3-ND - CONN SOCKET COAX STR 30GOLD |
| 相关产品： | A9996-ND - PRO CRIMPER HAND TOOL W/O DIES |
| 其它名称： | Q1389352 |
408-8582
6. Allow the tool handles to open fully and remove
the crimped connector from the dies.
5. CRIMP HEIGHT ADJUSTMENT
The tool frame assembly ratchet mechanism features
an adjustment wheel with numbered settings. If the
crimp height is not acceptable, adjust the ratchet as
follows:
1. Remove the lockscrew from the ratchet
adjustment wheel.
2. With a screwdriver, adjust the ratchet wheel from
the opposite side of the tool.
3. Observe the ratchet adjustment wheel. If a tighter
crimp is required, rotate the adjustment wheel
COUNTERCLOCKWISE to a higher-numbered
setting. If a looser crimp is required, rotate the
adjustment wheel CLOCKWISE to a lower-
numbered setting.
4. Replace the lockscrew.
5. Make a sample crimp and measure the crimp
height. If the crimp height is acceptable, secure the
lockscrew. If the dimension is unacceptable, remove
lockscrew and continue to adjust the ratchet, and
again measure a sample crimp.
6. MAINTENANCE AND INSPECTION
6.1. Maintenance
1. Remove dust, moisture, and other contaminants
with a clean, soft brush, or a clean, soft, lint-free
cloth. Do NOT use any objects that could damage
the dies or tool.
2. Make sure that the proper die-retaining screws
are properly secured.
3. When the dies are not in use, store them in a
clean, dry area.
4. Store the tool with the tool handles closed to
prevent objects from becoming lodged within the
jaws.
6.2. Inspection
1. Remove all lubrication and accumulated film from
the dies by immersing the dies in a suitable
commercial degreaser.
2. Make certain that all die-retaining screws and die
components are properly secured.
3. Inspect the crimping surfaces for flattened,
chipped, worn, or cracked areas. If damage is
evident, the dies must be replaced. Refer to ?
Section 7, REPLACEMENT.
Rev A
Screwdriver
Lockscrew ?
(Typ)
Ratchet ?
Adjustment ?
Wheel
Figure 4
6.3. Measuring the Die Opening
The die assembly will perform correctly as long as: ?
(1) the product specified is correct for the application,
(2) the specific die assembly is used, (3) the die
assembly has been measured to ensure that the
openings are correct, and (4) the tool has been
adjusted correctly. Figure 5 provides information on
die opening sizes.
7. REPLACEMENT
These crimping die assemblies are inspected before
shipment. It is recommended that the dies be
inspected immediately upon arrival at your facility to
ensure that the dies have not been damaged during
shipment.
Order replacements through your local TE
representative, or call 1-800-526-5142, or send a
facsimile of your purchase order to 1-717-986-7605, or
write to:
CUSTOMER SERVICE (038-035) ?
TYCO ELECTRONICS CORPORATION ?
PO BOX 3608 ?
HARRISBURG PA 17105-3608
8. REVISION SUMMARY
Revisions to this instruction sheet include:
? Changed company name and logo
3 of 4
相关PDF资料 |
PDF描述 |
|---|---|
| 91963-2 | S.D.E.PREM.DIE ASSY 16-14 PIDG |
| 91964-2 | S.D.E.PREM.DIE ASSY 22-16 PIDG |
| 91965-2 | S.D.E.PREM.DIE ASSY 12-10 PIDG |
| 929013 | KNOCKOUT TOOL |
| 931800-1 | ELEC PWR UNIT W/O F/TRK OR HD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 91912-31331LF | 制造商:FCI 功能描述:Conn Board to Board HDR 31 POS 1mm Solder ST SMD T/R 制造商:FCI 功能描述:CONN BD TO BD HDR 31 POS 1MM SLDR ST SMD - Tape and Reel |
| 91912-4 | 功能描述:冲压机与冲模 PREM SDE DIE, MINI COAXICON RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 919-124J-71P | 功能描述:RF 连接器 MCX RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| 919-124J-71PB | 制造商:Amphenol Corporation 功能描述:SPECIAL MCX JACK, 75 OHM, PC MOUNT - Bulk |
| 91912-5 | 功能描述:冲压机与冲模 PREM SDE DIE, MINI COAXICON RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
发布紧急采购，3分钟左右您将得到回复。