- 您现在的位置：买卖IC网 > PDF目录42734 > 9OSC0313 VCO, 6000 MHz - 12000 MHz PDF资料下载
参数资料
| 型号： | 9OSC0313 |
| 元件分类： | Voltage controlled oscillator |
| 英文描述： | VCO, 6000 MHz - 12000 MHz |
| 文件页数： | 8/16页 |
| 文件大小： | 1710K |
| 代理商： | 9OSC0313 |
Pre-production
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice.
2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
Page 16 of 16
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the
human body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product.This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix
Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for
surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be reasonably expected to result in a
significant injury to the user. (2) A critical component is any component of a life support device or system whose
failure to perform can be reasonably expected to cause the failure of the life support device or system, or to
affect its safety or effectiveness.
ESD - Gallium Arsenide (GaAs) devices are susceptible to electrostatic and mechanical damage. Die are supplied
in antistatic containers, which should be opened in cleanroom conditions at an appropriately grounded anti-
static workstation. Devices need careful handling using correctly designed collets, vacuum pickups or, with care,
sharp tweezers.
Die Attachment - GaAs Products from Mimix Broadband are 0.100 mm (0.004") thick and have vias through to the
backside to enable grounding to the circuit. Microstrip substrates should be brought as close to the die as
possible. The mounting surface should be clean and flat. If using conductive epoxy, recommended epoxies are
Ablestick 84-1LMI or 84-1LMIT cured in a nitrogen atmosphere per manufacturer's cure schedule. Apply epoxy
sparingly to avoid getting any on to the top surface of the die. An epoxy fillet should be visible around the total
die periphery. If eutectic mounting is preferred, then a fluxless gold-tin (AuSn) preform, approximately 0.001
thick, placed between the die and the attachment surface should be used. A die bonder that utilizes a heated
collet and provides scrubbing action to ensure total wetting to prevent void formation in a nitrogen atmosphere
is recommended. The gold-tin eutectic (80% Au 20% Sn) has a melting point of approximately 280 C (Note: Gold
Germanium should be avoided). The work station temperature should be 310 C 10 C. Exposure to these
extreme temperatures should be kept to minimum. The collet should be heated, and the die pre-heated to avoid
excessive thermal shock. Avoidance of air bridges and force impact are critical during placement.
Wire Bonding - Windows in the surface passivation above the bond pads are provided to allow wire bonding to
the die's gold bond pads. The recommended wire bonding procedure uses 0.076 mm x 0.013 mm (0.003" x
0.0005") 99.99% pure gold ribbon with 0.5-2% elongation to minimize RF port bond inductance. Gold 0.025 mm
(0.001") diameter wedge or ball bonds are acceptable for DC Bias connections. Aluminum wire should be
avoided. Thermo-compression bonding is recommended though thermosonic bonding may be used providing
the ultrasonic content of the bond is minimized. Bond force, time and ultrasonics are all critical parameters.
Bonds should be made from the bond pads on the die to the package or substrate. All bonds should be as short
as possible.
2
+
-
6.0-12.0 GHz GaAs MMIC
Voltage Controlled Feedback Oscillator
9OSC0313
May 2005 - Rev 05-May-05
相关PDF资料 |
PDF描述 |
|---|---|
| 9OSC0315 | VCO, 5500 MHz - 8400 MHz |
| 9OSC0315 | VCO, 5500 MHz - 8400 MHz |
| 9TCS1082NLGI8 | SPECIALTY ANALOG CIRCUIT, QCC32 |
| 9TCS1082NLGI | SPECIALTY ANALOG CIRCUIT, QCC32 |
| 9TCS1083NLGI | SPECIALTY ANALOG CIRCUIT, QCC32 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 9P.HDP20 | 功能描述:D-Sub标准连接器 D-Sub RCP 9P ST Thru-Hole RoHS:否 制造商:Omron Electronics 位置/触点数量:9 排数:2 型式:Female 安装风格:Through Hole 安装角:Right 端接类型:Solder 过滤: |
| 9P046R | 制造商:Farnell / Duratool 功能描述:PLIER SNIPE NOSE 150MM 制造商:Farnell / Duratool 功能描述:PLIER, SNIPE NOSE, 150MM 制造商:Farnell / Duratool 功能描述:TOOLS, PLIERS; Plier Style:Snipe Nose; Jaw Length:50mm; Overall Length:150mm ;RoHS Compliant: NA 制造商:Farnell / Duratool 功能描述:PLIER, SNIPE NOSE, 150MM; Plier Style:Snipe Nose; Jaw Length:50mm; Overall Length:150mm; Jaw Type:Snipe Nose; Length:145mm ;RoHS Compliant: NA |
| 9P055R | 制造商:Farnell / Duratool 功能描述:PLIER BENT NOSE 125MM 制造商:Farnell / Duratool 功能描述:PLIER, BENT NOSE, 125MM 制造商:Farnell / Duratool 功能描述:TOOLS, PLIERS; Plier Style:Curved Nose; Jaw Length:15mm; Overall Length:125mm ;RoHS Compliant: NA 制造商:Farnell / Duratool 功能描述:PLIER, BENT NOSE, 125MM; Plier Style:Bent Nose; Jaw Length:30mm; Overall Length:125mm; Jaw Type:Bent Nose; Length:125mm ;RoHS Compliant: NA |
| 9P056R | 制造商:Farnell / Duratool 功能描述:PLIER LONG NOSE 110MM 制造商:SPC Technology 功能描述:LONG NOSE PLIERS 4.92 OVERALL LENGTH 制造商:Farnell / Duratool 功能描述:PLIER, LONG NOSE, 110MM 制造商:Farnell / Duratool 功能描述:TOOLS, PLIERS; Plier Style:Long Nose; Jaw Length:15mm; Overall Length:110mm; Overall Length:4.92" ;RoHS Compliant: NA 制造商:Farnell / Duratool 功能描述:PLIER, LONG NOSE, 110MM; Plier Style:Long Nose; Jaw Length:25mm; Overall Length:110mm; Blade Length:7mm; Jaw Type:Long Nose; Jaw Width:7mm; Length:125mm ;RoHS Compliant: NA |
| 9P057R | 制造商:Farnell / Duratool 功能描述:CUTTER DIAGONAL 110MM 制造商:SPC Technology 功能描述:DIAGONAL CUTTERS 4.33 OVERALL LENGTH 制造商:Farnell / Duratool 功能描述:CUTTER, DIAGONAL, 110MM 制造商:Farnell / Duratool 功能描述:TOOLS, WIRE CUTTERS; Overall Length:4.33" ;RoHS Compliant: NA 制造商:Farnell / Duratool 功能描述:CUTTER, DIAGONAL, 110MM; Overall Length:110mm; Cutter Type:Diagonal; Cut Type:Diagonal; Jaw Length:14mm; Length:110mm ;RoHS Compliant: NA |
发布紧急采购，3分钟左右您将得到回复。