- 您现在的位置：买卖IC网 > PDF目录21914 > A1351KKTTN-T (Allegro Microsystems Inc)IC SENSOR HALL EFFECT 4-SIP PDF资料下载
参数资料
| 型号： | A1351KKTTN-T |
| 厂商： | Allegro Microsystems Inc |
| 文件页数： | 13/24页 |
| 文件大小： | 663K |
| 描述： | IC SENSOR HALL EFFECT 4-SIP |
| 产品培训模块： | Current Sensor |
| 产品变化通告： | Product Obsolescence 09/Nov/2011 |
| 标准包装： | 4,000 |
| 传感范围： | 0.055% ~ 0.095% DC/G |
| 类型： | 线性 - 单极，双极 |
| 电源电压： | 4.5 V ~ 5.5 V |
| 电流 - 电源： | 10mA |
| 电流 - 输出（最大）： | 1mA |
| 输出类型： | 数字，推挽式 |
| 特点： | 高精度 |
| 工作温度： | -40°C ~ 125°C |
| 封装/外壳： | 4-SIP |
| 供应商设备封装： | 4-SIP |
| 包装： | 带卷 (TR) |
A1351
High Precision Linear Hall Effect Sensor IC
with a Push/Pull, Pulse Width Modulated Output
12
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
After the initial 800 ms has elapsed, the duty cycle will cor-
respond to an applied magnetic field as expected. The 800 ms
calibration test time corresponds with a target PWM frequency of
125 Hz. If the PWM frequency is programmed away from its tar-
get of 125 Hz, the duration of the calibration test time will scale
inversely with the change in PWM frequency.
This test mode is optional and must be enabled by blowing its
programming bit. After the test mode bit has been blown, the
device enters Output Calibration mode every time the device is
powered-on. This test mode is provided so that the user can com-
pensate for differences in the ground potential between the A1351
and any interface circuitry used to measure the pulse width of the
A1351 output.
Figure 14. After powering-on, the A1351 outputs a 50% D for the first
800 ms, regardless of the applied magnetic field (Output Calibration mode
in effect). After the initial 800 ms has elapsed, the output responds to a
magnetic field as expected. The example in this figure assumes that a
large +B field is applied to the device after the initial 800 ms.
Output Calibration Mode
PWM output = 50% D
After 800 ms;
PWM output proportional
to applied magnetic field
相关PDF资料 |
PDF描述 |
|---|---|
| 3864-48 | CORD DBL BANANA PLUG COILED 48" |
| DMN3029LFG-13 | MOSFET N-CH 30V 5.3A PWRDI333-8 |
| 2239-C-48 | MULTI-STACK BANANA PLUG RG58 48" |
| A1186LLHLT-T | IC SWITCH HALL EFFECT UNI SOT-23 |
| A1186EUA-T | IC SWITCH HALL EFFECT UNI 3-SIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| A1351LKTTN-T | 功能描述:IC SENSOR HALL EFFECT 4-SIP RoHS:是 类别:传感器，转换器 >> 磁性 - 霍尔效应，数字式开关，线性，罗盘 (IC) 系列:- 标准包装:1 系列:- 传感范围:20mT ~ 80mT 类型:旋转 电源电压:4.5 V ~ 5.5 V 电流 - 电源:15mA 电流 - 输出（最大）:- 输出类型:数字式，PWM，8.5 位串行 特点:可编程 工作温度:-40°C ~ 150°C 封装/外壳:20-SSOP（0.209"，5.30mm 宽） 供应商设备封装:20-SSOP 包装:Digi-Reel® 其它名称:AS5132-HSST-500DKR |
| A1352-035 | 制造商:AVX Corporation 功能描述: |
| A1352-037 | 制造商:AVX Corporation 功能描述: |
| A13532-43N | 制造商:Harris Corporation 功能描述: |
| A1354 | 制造商:ALLEGRO 制造商全称:Allegro MicroSystems 功能描述:High Precision 2-Wire Linear Hall Effect Sensor IC with Pulse Width Modulated Output |
发布紧急采购，3分钟左右您将得到回复。