- 您现在的位置：买卖IC网 > PDF目录21914 > A1351KKTTN-T (Allegro Microsystems Inc)IC SENSOR HALL EFFECT 4-SIP PDF资料下载
参数资料
| 型号： | A1351KKTTN-T |
| 厂商： | Allegro Microsystems Inc |
| 文件页数： | 22/24页 |
| 文件大小： | 663K |
| 描述： | IC SENSOR HALL EFFECT 4-SIP |
| 产品培训模块： | Current Sensor |
| 产品变化通告： | Product Obsolescence 09/Nov/2011 |
| 标准包装： | 4,000 |
| 传感范围： | 0.055% ~ 0.095% DC/G |
| 类型： | 线性 - 单极，双极 |
| 电源电压： | 4.5 V ~ 5.5 V |
| 电流 - 电源： | 10mA |
| 电流 - 输出（最大）： | 1mA |
| 输出类型： | 数字，推挽式 |
| 特点： | 高精度 |
| 工作温度： | -40°C ~ 125°C |
| 封装/外壳： | 4-SIP |
| 供应商设备封装： | 4-SIP |
| 包装： | 带卷 (TR) |
A1351
High Precision Linear Hall Effect Sensor IC
with a Push/Pull, Pulse Width Modulated Output
21
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
To construct a current sensor using the A1351, first consider a
current carrying wire that we want to observe. As dictated by
Amperes Law, a magnetic field is produced around the wire
that is proportional to the amount of current flowing through
the wire. By passing this wire through a soft magnetic core, the
magnetic flux produced by the wire can be concentrated and
directed through a gap in the core. The magnetic flux density can
be measured by inserting the A1351 SIP into the gap in the core.
As a result, the output of the A1351 device will be proportional
to the amount of current flowing through the wire.
The example feedthrough current sensing setup shown below
(figure 7) has a core made of mu metal that is 2 mm thick
and 4 mm wide. The inner radius of the core is 14.5 mm and
the outer radius is 18.5 mm. The wire going through the center
of the core has a radius of 9 mm. Using this setup with a gap of
1.7 mm, a field strength results that is on the order of 7 G / A at
the Hall element in the A1351.
The recommended core material for construction of the concen-
trator depends on the specific application. If high flux saturation
is desired, then an alloy such as HyPerm49 is recommended.
For lower-current level sensing applications, a material such as
HyMu80 may be desired. (HyMu80 has lower magnetic flux
saturation than HyPerm49, therefore more HyMu80 mate-
rial is required to carry the same amount of flux compared
to Hyperm49.) If frequency response is a concern, then eddy
currents can be reduced by either laminating the HyPerm49 or
HyMu80 alloys, or by using a ferrite core.
Constructing a Current Sensor Using the A1351
?8 mm
4 mm
2 mm
?7 mm
Application-specific housing
Ring concentrator
Current-conducting wire
A136x
Center Hall element in gap
1.7 mm
Figure 7. The example current sensor setup used to generate the data in this section was
constructed with a split-ring concentrator and an A1351 device. A copper wire was fed
through the concentrator, and the A1351 placed in its gap. This approximates a typical
ammeter application on a thick wire, such as shown in the left view. Note that such
applications usually have a protective housing, which should be taken into consideration
when designing the nal application. The housing is beyond the scope of this example.
相关PDF资料 |
PDF描述 |
|---|---|
| 3864-48 | CORD DBL BANANA PLUG COILED 48" |
| DMN3029LFG-13 | MOSFET N-CH 30V 5.3A PWRDI333-8 |
| 2239-C-48 | MULTI-STACK BANANA PLUG RG58 48" |
| A1186LLHLT-T | IC SWITCH HALL EFFECT UNI SOT-23 |
| A1186EUA-T | IC SWITCH HALL EFFECT UNI 3-SIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| A1351LKTTN-T | 功能描述:IC SENSOR HALL EFFECT 4-SIP RoHS:是 类别:传感器，转换器 >> 磁性 - 霍尔效应，数字式开关，线性，罗盘 (IC) 系列:- 标准包装:1 系列:- 传感范围:20mT ~ 80mT 类型:旋转 电源电压:4.5 V ~ 5.5 V 电流 - 电源:15mA 电流 - 输出（最大）:- 输出类型:数字式，PWM，8.5 位串行 特点:可编程 工作温度:-40°C ~ 150°C 封装/外壳:20-SSOP（0.209"，5.30mm 宽） 供应商设备封装:20-SSOP 包装:Digi-Reel® 其它名称:AS5132-HSST-500DKR |
| A1352-035 | 制造商:AVX Corporation 功能描述: |
| A1352-037 | 制造商:AVX Corporation 功能描述: |
| A13532-43N | 制造商:Harris Corporation 功能描述: |
| A1354 | 制造商:ALLEGRO 制造商全称:Allegro MicroSystems 功能描述:High Precision 2-Wire Linear Hall Effect Sensor IC with Pulse Width Modulated Output |
发布紧急采购，3分钟左右您将得到回复。