参数资料
| 型号： | AD5755-1ACPZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 43/52页 |
| 文件大小： | 0K |
| 描述： | IC DAC 16BIT SERIAL 64LFCSP |
| 视频文件： | AD5755: 16-Bit Multi-Channel, Voltage and Current Output DAC |
| 特色产品： | AD5755 / AD5755-1 / AD5757 DACs |
| 标准包装： | 1 |
| 设置时间： | 11µs |
| 位数： | 16 |
| 数据接口： | DSP，MICROWIRE?，QSPI?，串行，SPI? |
| 转换器数目： | 4 |
| 电压电源： | 模拟和数字，双 ± |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 64-VFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 64-LFCSP-VQ（9x9） |
| 包装： | 托盘 |
| 输出数目和类型： | 4 电流，4 电压 |
| 采样率（每秒）： | * |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页当前第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页
AD5755-1
Data Sheet
Rev. E | Page 48 of 52
Traces
The power supply lines of the AD5755-1 should use as large a
trace as possible to provide low impedance paths and reduce
the effects of glitches on the power supply line. Fast switching
signals such as clocks should be shielded with digital ground
to prevent radiating noise to other parts of the board and
should never be run near the reference inputs. A ground line
routed between the SDIN and SCLK lines helps reduce crosstalk
between them (not required on a multilayer board that has a
separate ground plane, but separating the lines helps). It is
essential to minimize noise on the REFIN line because it
couples through to the DAC output.
Avoid crossover of digital and analog signals. Traces on oppo-
site sides of the board should run at right angles to each other.
This reduces the effects of feedthrough on the board. A
microstrip technique is by far the best but not always possible
with a double-sided board. In this technique, the component
side of the board is dedicated to ground plane, whereas signal
traces are placed on the solder side.
DC-to-DC Converters
To achieve high efficiency, good regulation, and stability, a well-
designed printed circuit board layout is required.
Follow these guidelines when designing printed circuit boards
Keep the low ESR input capacitor, CIN, close to AVCC and
PGND.
Keep the high current path from CIN through the inductor,
LDCDC, to SWX and PGND as short as possible.
Keep the high current path from CIN through LDCDC and the
rectifier, DDCDC, to the output capacitor, CDCDC, as short as
possible.
Keep high current traces as short and as wide as possible.
The path from CIN through the inductor, LDCDC, to SWX and
PGND should be able to handle a minimum of 1 A.
Place the compensation components as close as possible to
COMPDCDC_x.
Avoid routing high impedance traces near any node
connected to SWx or near the inductor to prevent radiated
noise injection.
GALVANICALLY ISOLATED INTERFACE
In many process control applications, it is necessary to provide
an isolation barrier between the controller and the unit being
controlled to protect and isolate the controlling circuitry from
any hazardous common-mode voltages that may occur. The
Analog Devices iCoupler products can provide voltage isolation
in excess of 2.5 kV. The serial loading structure of the AD5755-
1 makes it ideal for isolated interfaces because the number of
interface lines is kept to a minimum. Figure 88 shows a 4-
channel isolated interface to the AD5755-1 using an
ADuM1400. For more information, visit www.analog.com.
09226-
081
VIA
SERIAL CLOCK
OUT
TO SCLK
VOA
ENCODE
DECODE
VIB
SERIAL DATA
OUT
TO SDIN
VOB
ENCODE
DECODE
VIC
SYNC OUT
VOC
ENCODE
DECODE
VID
CONTROL OUT
VOD
ENCODE
DECODE
MICROCONTROLLER
ADuM1400*
*ADDITIONAL PINS OMITTED FOR CLARITY.
TO SYNC
TO LDAC
Figure 88. Isolated Interface
相关PDF资料 |
PDF描述 |
|---|---|
| AD5755BCPZ-REEL7 | IC DAC 16BIT QUAD 64-LFCSP |
| AD5760BCPZ | IC DAC VOLT OUT 16BIT 24LFCSP |
| AD5762RCSUZ-REEL7 | IC DAC 16BIT QUAD VOUT 32-TQFP |
| AD5763CSUZ-REEL7 | DAC 16BIT DUAL 5V 2LSB 32-TQFP |
| AD5764CSUZ | IC DAC 16BIT QUAD VOUT 32TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD5755-1ACPZ-REEL7 | 功能描述:IC DAC 16BIT SERIAL 64LFCSP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:Data Converter Fundamentals DAC Architectures 标准包装:750 系列:- 设置时间:7µs 位数:16 数据接口:并联 转换器数目:1 电压电源:双 ± 功率耗散（最大）:100mW 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-LCC（J 形引线） 供应商设备封装:28-PLCC（11.51x11.51） 包装:带卷 (TR) 输出数目和类型:1 电压，单极；1 电压，双极 采样率（每秒）:143k |
| AD5755-1X | 制造商:AD 制造商全称:Analog Devices 功能描述:Quad Channel, 16-Bit, Serial Input, 4-20mA & Voltage Output DAC, Dynamic Power Control, HART Connectivity |
| AD5755ACPZ | 功能描述:数模转换器- DAC 16Bit Quad V/I DAC with Dynamic Power RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| AD5755ACPZ-REEL7 | 功能描述:IC DAC 16BIT QUAD 64-LFCSP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 设置时间:4µs 位数:12 数据接口:串行 转换器数目:2 电压电源:单电源 功率耗散（最大）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 供应商设备封装:8-uMAX 包装:管件 输出数目和类型:2 电压，单极 采样率（每秒）:* 产品目录页面:1398 (CN2011-ZH PDF) |
| AD5755BCPZ | 制造商:Analog Devices 功能描述: 制造商:Analog Devices 功能描述:DAC QUAD 16BIT -26.4/33VIN 64LFCSP 制造商:Analog Devices 功能描述:DAC, QUAD, 16BIT, -26.4/33VIN, 64LFCSP 制造商:Analog Devices 功能描述:DAC, QUAD, 16BIT, -26.4/33VIN, 64LFCSP, Resolution (Bits):16bit, Input Channel Type:Serial, Digital IC Case Style:LFCSP, No. of Pins:64, Data Interface:Microwire, QSPI, SPI, Supply Current:8.6mA, Operating Temperature Min:-40C, , RoHS Compliant: Yes |
发布紧急采购，3分钟左右您将得到回复。