- 您现在的位置：买卖IC网 > PDF目录10346 > AD7441BRTZ-REEL7 (Analog Devices Inc)IC ADC 10BIT W/DIFF INP SOT-23-8 PDF资料下载
参数资料
| 型号： | AD7441BRTZ-REEL7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 8/25页 |
| 文件大小： | 0K |
| 描述： | IC ADC 10BIT W/DIFF INP SOT-23-8 |
| 标准包装： | 1 |
| 位数： | 10 |
| 采样率（每秒）： | 1M |
| 数据接口： | DSP，MICROWIRE?，QSPI?，串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 9.25mW |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SOT-23-8 |
| 供应商设备封装： | SOT-23-8 |
| 包装： | 标准包装 |
| 输入数目和类型： | 1 个伪差分，单极 |
| 其它名称： | AD7441BRTZ-REEL7DKR |
AD7441/AD7451
Rev. D | Page 15 of 24
When no amplifier is used to drive the analog input, it is
recommended that the source impedance be limited to low
values. The maximum source impedance depends on the
amount of total harmonic distortion that can be tolerated.
The THD increases as the source impedance increases and
performance degrades.
Figure 25 shows a graph of THD vs. analog input signal
frequency for different source impedances.
0
–100
–90
–80
–70
–60
–50
–40
–30
–10
–20
10k
100k
1M
INPUT FREQUENCY (Hz)
T
H
D
(
d
B)
200
100
62
10
TA = 25°C
VDD = 5V
03
15
3
-02
5
Figure 25. THD vs. Analog Input Frequency for Various Source Impedances
Figure 26 shows a graph of THD vs. analog input frequency for
various supply voltages while sampling at 1 MSPS with an SCLK
of 18 MHz. In this case, the source impedance is 10 Ω.
–50
–90
–85
–80
–75
–70
–65
–60
–55
10
100
1000
INPUT FREQUENCY (kHz)
T
H
D
(
d
B)
TA = 25°C
VDD = 2.7V
VDD = 3.6V
VDD = 4.75V
VDD = 5.25V
03
15
3
-02
6
Figure 26. THD vs. Analog Input Frequency for Various Supply Voltages
DIGITAL INPUTS
The digital inputs applied to the AD7441/AD7451 are not limited
by the maximum ratings that limit the analog inputs. Instead,
the digital inputs applied, that is, CS and SCLK, can go to 7 V
and are not restricted by the VDD + 0.3 V limits as on the analog
input. The main advantage of the inputs not being restricted to
the VDD + 0.3 V limit is that power supply sequencing issues are
avoided. If CS or SCLK are applied before VDD, there is no risk
of latch-up as there would be on the analog inputs if a signal
greater than 0.3 V were applied prior to VDD.
REFERENCE
An external source is required to supply the reference to the
AD7441/AD7451. This reference input can range from 100 mV
to VDD. The specified reference is 2.5 V for the power supply
range 2.7 V to 5.25 V. The reference input chosen for an appli-
cation must never be greater than the power supply. Errors in
the reference source result in gain errors in the AD7441/AD7451
transfer function and add to the specified full-scale errors of the
part. A capacitor of at least 0.1 μF must be placed on the VREF
pin. Suitable reference sources for the AD7441/AD7451 include
tion diagram for the VREF pin.
1
AD780
NC
8
2
VIN
NC
7
3
GND
6
4
TEMP
5
OPSEL
TRIM
VOUT
AD7441/
AD7451*
VREF
2.5V
NC
VDD
NC
VDD
NC = NO CONNECT
10nF
0.1F
*ADDITIONAL PINS OMITTED FOR CLARITY.
0
31
53
-0
27
Figure 27. Typical VREF Connection Diagram for VDD = 5 V
相关PDF资料 |
PDF描述 |
|---|---|
| MAX9725AETC+T | IC AMP AUDIO .025W STER 12TQFN |
| MS27656T13B8P | CONN RCPT 8POS WALL MNT W/PINS |
| MS27656E13B8P | CONN RCPT 8POS WALL MNT W/PINS |
| MAX9725BETC+T | IC AMP AUDIO .025W STER 12TQFN |
| VI-B1T-MW-S | CONVERTER MOD DC/DC 6.5V 100W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD744AH | 制造商:Analog Devices 功能描述:OP Amp Single GP 制造商:Rochester Electronics LLC 功能描述:PRECISION BIPOLAR OP AMP - Bulk |
| AD744AQ | 功能描述:IC OPAMP BIFET 13MHZ PREC 8CDIP RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:150 系列:- 放大器类型:音频 电路数:2 输出类型:- 转换速率:5 V/µs 增益带宽积:12MHz -3db带宽:- 电流 - 输入偏压:100nA 电压 - 输入偏移:500µV 电流 - 电源:6mA 电流 - 输出 / 通道:50mA 电压 - 电源，单路/双路(±):4 V ~ 32 V，±2 V ~ 16 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:8-TSSOP 包装:管件 |
| AD744AQ/+ | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Voltage-Feedback Operational Amplifier |
| AD744AR | 制造商:AD 制造商全称:Analog Devices 功能描述:Precision, 500 ns Settling BiFET Op Amp |
| AD744BQ | 功能描述:IC OPAMP BIFET 13MHZ PREC 8CDIP RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:Excalibur™ 放大器类型:J-FET 电路数:1 输出类型:- 转换速率:45 V/µs 增益带宽积:10MHz -3db带宽:- 电流 - 输入偏压:20pA 电压 - 输入偏移:490µV 电流 - 电源:1.7mA 电流 - 输出 / 通道:48mA 电压 - 电源，单路/双路(±):4.5 V ~ 38 V，±2.25 V ~ 19 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。