参数资料
型号: ADN2804ACPZ-RL7
厂商: Analog Devices Inc
文件页数: 7/24页
文件大小: 0K
描述: IC CLK/DATA REC 622MBPS 32-LFCSP
标准包装: 1,500
类型: 时钟和数据恢复(CDR),多路复用器
PLL:
主要目的: SONET/SDH
输入: CML
输出: LVDS
电路数: 1
比率 - 输入:输出: 1:2
差分 - 输入:输出: 是/是
频率 - 最大: 622MHz
电源电压: 3 V ~ 3.6 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 32-VFQFN 裸露焊盘,CSP
供应商设备封装: 32-LFCSP-VQ(5x5)
包装: 带卷 (TR)
Data Sheet
ADN2804
Rev. C | Page 15 of 24
At medium jitter frequencies, the gain and tuning range of the
VCO are not large enough to track input jitter. In this case, the
VCO control voltage becomes large and saturates, and the VCO
frequency dwells at one extreme of its tuning range. The size of
the VCO tuning range, therefore, has only a small effect on the
jitter accommodation. The delay-locked loop control voltage is
now larger; therefore, the phase shifter takes on the burden of
tracking the input jitter. The phase shifter range, in UI, can be
seen as a broad plateau on the jitter tolerance curve. The phase
shifter has a minimum range of 2 UI at all data rates.
The gain of the loop integrator is small for high jitter
frequencies; therefore, larger phase differences are needed to
increase the loop control voltage enough to tune the range of
the phase shifter. However, large phase errors at high jitter
frequencies cannot be tolerated. In this region, the gain of the
integrator determines the jitter accommodation. Because the
gain of the loop integrator declines linearly with frequency,
jitter accommodation is lower with higher jitter frequency. At
the highest frequencies, the loop gain is very small, and little
tuning of the phase shifter can be expected. In this case, jitter
accommodation is determined by the eye opening of the input
data, the static phase error, and the residual loop jitter generation.
The jitter accommodation is roughly 0.5 UI in this region. The
corner frequency between the declining slope and the flat region
is the closed-loop bandwidth of the delay-locked loop, which is
roughly 1.0 MHz at 622 Mbps.
相关PDF资料
PDF描述
MS3120F22-55P CONN RCPT 55POS WALL MNT W/PINS
MS27497E24B2PA CONN RCPT 100POS WALL MNT W/PINS
AD9523BCPZ-REEL7 IC INTEGER-N CLCK GEN 72LFCSP
PT06A-20-16P CONN PLUG 16 POS STRAIGHT W/PINS
VE-JTW-MX-F3 CONVERTER MOD DC/DC 5.5V 75W
相关代理商/技术参数
参数描述
ADN2805 制造商:AD 制造商全称:Analog Devices 功能描述:1.25 Gbps Clock and Data Recovery IC
ADN2805ACPZ 功能描述:IC CLK/DATA REC 1.25GBPS 32LFCSP RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 专用 系列:- 标准包装:1 系列:- 类型:时钟/频率发生器,多路复用器 PLL:是 主要目的:存储器,RDRAM 输入:晶体 输出:LVCMOS 电路数:1 比率 - 输入:输出:1:2 差分 - 输入:输出:无/是 频率 - 最大:400MHz 电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-TSSOP(0.173",4.40mm 宽) 供应商设备封装:16-TSSOP 包装:Digi-Reel® 其它名称:296-6719-6
ADN2805ACPZ-500RL7 功能描述:IC CLK/DATA REC 1.25GBPS 32LFCSP RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 专用 系列:- 标准包装:28 系列:- 类型:时钟/频率发生器 PLL:是 主要目的:Intel CPU 服务器 输入:时钟 输出:LVCMOS 电路数:1 比率 - 输入:输出:3:22 差分 - 输入:输出:无/是 频率 - 最大:400MHz 电源电压:3.135 V ~ 3.465 V 工作温度:0°C ~ 85°C 安装类型:表面贴装 封装/外壳:64-TFSOP (0.240",6.10mm 宽) 供应商设备封装:64-TSSOP 包装:管件
ADN2805ACPZ-RL7 功能描述:IC CLK/DATA REC 1.25GBPS 32LFCSP RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 专用 系列:- 标准包装:28 系列:- 类型:时钟/频率发生器 PLL:是 主要目的:Intel CPU 服务器 输入:时钟 输出:LVCMOS 电路数:1 比率 - 输入:输出:3:22 差分 - 输入:输出:无/是 频率 - 最大:400MHz 电源电压:3.135 V ~ 3.465 V 工作温度:0°C ~ 85°C 安装类型:表面贴装 封装/外壳:64-TFSOP (0.240",6.10mm 宽) 供应商设备封装:64-TSSOP 包装:管件
ADN2806 制造商:AD 制造商全称:Analog Devices 功能描述:622 Mbps Clock and Data Recovery IC