参数资料
型号: ADP1048DC1-EVALZ
厂商: Analog Devices Inc
文件页数: 63/84页
文件大小: 0K
描述: DAUGHTERCARD ADP1048
标准包装: 1
主要目的: 电源管理,功率因数校正
嵌入式:
已用 IC / 零件: ADP1048
次要属性: USB,I2C接口
已供物品:
Data Sheet
Table 81. Register 0xFE13—PWM2 Falling Edge Setting (PWM2 Pin)
ADP1047/ADP1048
Bits
[7:4]
[3:2]
Bit Name
RSVD
t 2
R/W
R
R/W
Description
Reserved.
These bits contain the two LSBs of the 10-bit t 2 time. This value is always used with the eight
bits of Register 0xFE12, which contains the eight MSBs of the t 2 time.
1
Modulate enable
R/W
1 = PWM modulation acts on the t 2 edge.
0 = no PWM modulation of the t 2 edge.
0
t 2 sign
R/W
1 = positive sign. Increase of PWM modulation moves t 2 right.
0 = negative sign. Increase of PWM modulation moves t 2 left.
PWM_SET REGISTER
Table 82. Register 0xFE14—PWM_SET
Bits
[7:5]
4
Bit Name
RSVD
ADP1048 operation
R/W
R
R/W
Description
Reserved.
Reserved for the ADP1048 only.
1 = bridgeless PFC operation.
0 = interleaved PFC operation.
3
PWM resolution
R/W
1 = 5 ns.
0 = 40 ns.
2
PWM enable
R/W
1 = disable the PWM output.
0 = enable the PWM output.
1
PWM2 enable
R/W
1 = disable the PWM2 output.
0 = enable the PWM2 output.
0
Go button
R/W
The PWM settings are updated during the transition of this bit from low to high.
PWM_LIMIT REGISTER
Table 83. Register 0xFE15—PWM_LIMI T
Bits
[7:4]
[3:0]
Bit Name
Limit minimum
on time
Limit minimum
off time
R/W
R/W
R/W
Description
These bits set the minimum on time for the PWM outputs in steps of 80 ns: 0000 = 0 ns and
1111 = 1200 ns.
These bits set the minimum off time for the PWM outputs: 0000 = 40 ns, 0001 = 80 ns, 1111 =
1200 ns.
RTD ADC OFFSET TRIM SETTING (MSB) REGISTER
This register must be unlocked for write access; see Table 61.
Table 84. Register 0xFE16—RTD ADC Offset Trim Setting (MSB)
Bits
[7:2]
1
Bit Name
RSVD
Trim polarity
R/W
R/W
R/W
Description
Reserved.
1 = negative offset trim is introduced.
0 = positive offset trim is introduced.
0
RTD ADC offset trim
R/W
This bit is the MSB of the 9-bit value that sets the amount of offset trim applied to the RTD ADC
reading. The LSBs are specified in Register 0xFE17.
RTD ADC OFFSET TRIM SETTING (LSB) REGISTER
This register must be unlocked for write access; see Table 61.
Table 85. Register 0xFE17—RTD ADC Offset Trim Setting (LSB)
Bits
[7:0]
Bit Name
RTD ADC offset trim
R/W
R/W
Description
These eight bits are the LSBs of the 9-bit value that sets the amount of offset trim applied to
the RTD ADC reading. The MSB is specified in Register 0xFE16, Bit 0.
Rev. 0 | Page 63 of 84
相关PDF资料
PDF描述
CK2125R33M-T INDUCTOR .33UH LAYER 0805
6374110-6 C/A SM, LC TO LC 1METER
VE-J1Y-EZ-S CONVERTER MOD DC/DC 3.3V 16.5W
UPS2V2R2MPD1TD CAP ALUM 2.2UF 350V 20% RADIAL
H3BKH-4018M IDC CABLE - HSR40H/AE40M/HPK40H
相关代理商/技术参数
参数描述
ADP1048WARQZ-R7 功能描述:PFC IC Average Current 30kHz ~ 400kHz 24-QSOP 制造商:analog devices inc. 系列:- 包装:带卷(TR) 零件状态:有效 模式:平均电流 频率 - 开关:30kHz ~ 400kHz 电流 - 启动:- 电压 - 电源:3 V ~ 3.6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:24-SSOP(0.209",5.30mm 宽) 供应商器件封装:24-QSOP 标准包装:1,000
ADP1050ACPZ-R7 功能描述:Power Supply Controller Power Supply Controller/Monitor 20-LFCSP-WQ (4x4) 制造商:analog devices inc. 系列:- 包装:剪切带(CT) 零件状态:有效 应用:电源控制器/监控器 电压 - 输入:0 V ~ 1.6 V 电压 - 电源:3 V ~ 3.6 V 电流 - 电源:28.5mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:20-WFQFN 裸露焊盘,CSP 供应商器件封装:20-LFCSP-WQ(4x4) 标准包装:1
ADP1050ACPZ-RL 功能描述:Power Supply Controller Power Supply Controller/Monitor 20-LFCSP-WQ (4x4) 制造商:analog devices inc. 系列:- 包装:带卷(TR) 零件状态:在售 应用:电源控制器/监控器 电压 - 输入:0 V ~ 1.6 V 电压 - 电源:3 V ~ 3.6 V 电流 - 电源:28.5mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:20-WFQFN 裸露焊盘,CSP 供应商器件封装:20-LFCSP-WQ(4x4) 标准包装:5,000
ADP1050DC1-EVALZ 功能描述:ADP1050 - Power Management, Digital Power Controller Evaluation Board 制造商:analog devices inc. 系列:- 零件状态:有效 主要用途:电源管理,数字电源控制器 嵌入式:- 使用的 IC/零件:ADP1050 主要属性:- 辅助属性:- 所含物品:板 标准包装:1
ADP1051 制造商:AD 制造商全称:Analog Devices 功能描述:Digital Controller for Isolated Power Supply with PMBus Interface